WDR isn't wide screen, it stands for Wide Dynamic Range and it's the ability of the camera to capture light and shadow values, so it can record more details in high lights and dark shadows.
Thank you so much for taking the time to present this video on the Rexing dash cam. I am a little dyslexic and instructions sometimes don’t sync in, but your video was a blessing. 🇺🇸
If you turn loop recording off the camera will record until the sd card if full. It will not overwrite previous data logged and the camera will then stop recording. At this point you must eject the card and erase it, or format the card again in the unit. On the timed loop modes it is different it will overwrite when the sd card is full and will still record in selected loop mode setting. Dont find this out the hard way.
I have an outlet that has the option of being on 24/7. If I plug it into that outlet, will the dash can be running all night long even when the car is off? I tested it and this seemed like it was on and it wasn’t turning off. Is there a mode where It won’t be loop recording 24/7? Don’t want it draining my battery either
Thanks for taking the time to post this. I was wondering about those gravity sensing and parking monitor settings. Don't like when the camera randomly turns on by itself.
can you made a video on how to setup the rexing v1 such as inserting the memory card, format the card, recharge the internal battery, etc. for the very first basic steps after the dash cam is removed from the box ?
I appreciate the information, but the camera loosing focus on the unit made it hard to watch. Next video it might help to have a stationary camera and have the unit lying on something so that it stays the same distance from the camera. And maybe point at the buttons with a pen or something that won’t block them like your fingers.
WDR is wide dynamic range, not widescreen, just leave it on. Also for motion sensor and parking mode is needs to have continuous power, in my car I have intentionally hard wired to a fuse which is not continuous, but comes on when the ignition is on, but if I needed these 2 functions I would hard wire to a continuous power source, in my car that would be electric folding mirrors which operates when the key is not in
How do I format the SD card to download the new firmware? The rexing does not turn off after 3 minutes. I also have the Rexing hardwire if this matter.
Whenever i feel like i want to shoot Video of both the Front doors these cameras have Option to Shoot outside at any time like a Vlogger and do not want to shoot video of (Front and inside the Rear Room) , then the SKYBLUESEA B2W & CAMSONIC ULTRA Z 2 & 3 Dash Cam Benefits if a person want to shoot a video outside the front doors sides Left & Right. Option like Rear View Mirror , would be easy to change the direction to record Multiple Angles like a Pro Photographer of both the Cams accordingly , option to Rotate , as they Rotates 180 degrees and covers the area least 140 or 160 degrees each Cam on both the Door sides , like Rear view Mirror Angle . I love those Dash Cams . My suggestion to the Dash Cam Manufacturers .
Larry Murillo A file system is for storage just like an empty toolbox with separators, if you put the spacers too close you can't fit the long hammer. Cluster size is like the size of each unit of free space used for storage. The Camera expects a specific arrangement. just format the memory card with the camera menu
Thank you for your additional remarks. After trying to do it on the PC, I took your advice and did the format on the camera and now it works fine. Thanks all................
It doesn't know if its in park, only if the car is off. If you are using the 12v accessory socket power adapter, then it will turn off and on based on when your accessory socket is energized. Easy way is just to watch the backlight on the buttons when you get in the car but before you turn on the car. This is easier at night. Do the buttons glow red all night long? If so, then it continues to record even when the car is off. If the there is no backlight until after you turn on the car, then the dash cam is recording only when the engine is on. If you find your dashcam is powered up only when your car is on, and you'd rather have it record 24/7, just have an autosound shop hardwire the dashcam to the fuse box, taping into a constant 12+. They shouldn't charge much for this, as its the simplest thing to do, 30-45min labor.
Can you set it up so when it starts up and is recording the screen goes off sooner then 3 minutes? I don't like the distraction of seeing the screen on and recording.
The latest firmware does not have "motion sensor" and "parking monitor". Because users have found it causes corrupt files which sometimes defeats the continuous looping of the video, because the device can't delete the corrupt file.
Does anybody else have an issue with the date format. even if I select MM/DD/YY it still pops up on the screen as YY/MM/DD. any idea if I'm doing something wrong or not?
Does that red recording light blink the whole time it's recording or can you turn that off? In the daytime it wouldn't bother me, but at night it would.
the red light on the buttons continue to blink, you can put black electrical tape over it, they don't turn off. The screen can be turned off, using the buttons or using the screen saver menu option to set it to turn off after a duration of time.
Calm down old timer. If you are too lazy to learn how to use a dash cam and blame it on your age, y ou are certainnly too old to get your panties in a bunch. .Calm down old timer. Rest. Have some warm milk. .Do NOT drive a motor vehicle. Maybe you should put that dash cam on your wheel chair you old fart
You don't have ANY of your info posted grandpa. Hey, now you have my interest .Anyone who can mow five lawns while in a wheel chair deserves my admiration, Why don't you make a VIDEO of it and put it here so we can all see a lazy moron in a wheelchair mowing lawns. So you mow lawns for a living for tips from your neighbors. Gee, YOU'RE a real sucess story old fella.
You showed everything except the most important part which is how to play videos. Then you don't even at least put it in the description so viewers can easily get to it. DISLIKE
THIS is an EXCELLENT VIDEO! Would have never had the patience to read the manual. THANKS ! ! !
I DID read the manual and this video is much, much better! The visuals help so much! Thank you!
WDR isn't wide screen, it stands for Wide Dynamic Range and it's the ability of the camera to capture light and shadow values, so it can record more details in high lights and dark shadows.
six years later this is still a helpful video. thx!
also 7 years later!
Thank you so much for taking the time to present this video on the Rexing dash cam. I am a little dyslexic and instructions sometimes don’t sync in, but your video was a blessing. 🇺🇸
After watching four videos, I found yours to be the most useful overall.
If you turn loop recording off the camera will record until the sd card if full. It will not overwrite previous data logged and the camera will then stop recording. At this point you must eject the card and erase it, or format the card again in the unit. On the timed loop modes it is different it will overwrite when the sd card is full and will still record in selected loop mode setting. Dont find this out the hard way.
Sadly. I found out the hard way
Great job. You just made me an expert at this car cam. Thanks!
The useful video I have ever watched all year thank you for uploading this video
Good video. Though mines only records for 3 minute videos and some menus are missing or placed differently. Solid guide however.
I have an outlet that has the option of being on 24/7. If I plug it into that outlet, will the dash can be running all night long even when the car is off? I tested it and this seemed like it was on and it wasn’t turning off. Is there a mode where It won’t be loop recording 24/7? Don’t want it draining my battery either
Thank you for sharing. Excellent video.I just bought this Rexing V1-4K dash cam but don't have the Delayed Shutdown under any settings option.
Older version of the Rexing Camera I bought (4K) but still useful.
Awesome! Thanks for the time-saving video
I bought this cam for my truck over a year ago and Could Not get the time set correctly. Thank You!
Very helpful, thanks for this video!
Thanks for taking the time to post this.
I was wondering about those gravity sensing and parking monitor settings.
Don't like when the camera randomly turns on by itself.
Thanks man, I was getting no audio and you helped me at 1:00
You're a life saver. Excellent video.
can you made a video on how to setup the rexing v1 such as inserting the memory card, format the card, recharge the internal battery, etc. for the very first basic steps after the dash cam is removed from the box ?
Have you had an error message pop up "mass storage"? I had it hardwired to my car
I have this camera but I don't have the parking monitor option. Mine is hard wired.
Excellent video, even though I have a AGPtek cam the setup is very similiar. Thanks for uploading, very helpful.
I have the rexing v1p and the one option it doesn't have and it's menu is the format. Anyone else have this dashcam and noticed this to?
I appreciate the information, but the camera loosing focus on the unit made it hard to watch. Next video it might help to have a stationary camera and have the unit lying on something so that it stays the same distance from the camera. And maybe point at the buttons with a pen or something that won’t block them like your fingers.
WDR is wide dynamic range, not widescreen, just leave it on. Also for motion sensor and parking mode is needs to have continuous power, in my car I have intentionally hard wired to a fuse which is not continuous, but comes on when the ignition is on, but if I needed these 2 functions I would hard wire to a continuous power source, in my car that would be electric folding mirrors which operates when the key is not in
How do I format the SD card to download the new firmware? The rexing does not turn off after 3 minutes. I also have the Rexing hardwire if this matter.
Whenever i feel like i want to shoot Video of both the Front doors these cameras have Option to Shoot outside at any time like a Vlogger and do not want to shoot video of (Front and inside the Rear Room) , then the SKYBLUESEA B2W & CAMSONIC ULTRA Z 2 & 3 Dash Cam Benefits if a person want to shoot a video outside the front doors sides Left & Right. Option like Rear View Mirror , would be easy to change the direction to record Multiple Angles like a Pro Photographer of both the Cams accordingly , option to Rotate , as they Rotates 180 degrees and covers the area least 140 or 160 degrees each Cam on both the Door sides , like Rear view Mirror Angle . I love those Dash Cams .
My suggestion to the Dash Cam Manufacturers .
Following the first step, I got a message "Custer size wrong. Please format" What the hell does that mean???
Larry Murillo A file system is for storage just like an empty toolbox with separators, if you put the spacers too close you can't fit the long hammer. Cluster size is like the size of each unit of free space used for storage. The Camera expects a specific arrangement. just format the memory card with the camera menu
Thank you for your additional remarks. After trying to do it on the PC, I took your advice and did the format on the camera and now it works fine. Thanks all................
How will you know if it records while it’s in park
It doesn't know if its in park, only if the car is off. If you are using the 12v accessory socket power adapter, then it will turn off and on based on when your accessory socket is energized.
Easy way is just to watch the backlight on the buttons when you get in the car but before you turn on the car. This is easier at night. Do the buttons glow red all night long? If so, then it continues to record even when the car is off. If the there is no backlight until after you turn on the car, then the dash cam is recording only when the engine is on.
If you find your dashcam is powered up only when your car is on, and you'd rather have it record 24/7, just have an autosound shop hardwire the dashcam to the fuse box, taping into a constant 12+. They shouldn't charge much for this, as its the simplest thing to do, 30-45min labor.
Excellent video!
I noticed my unit blinks red and blue at the same time when in use. Any Ideas on why that is?
Why does my Rexing v1 only record 1min, 2min & 3min loop only ?😔
It lasted 10 minutes and 8 seconds so it actually did 10+ 😂
The only people thumbing this down are those who don’t have a camera
wha wha wha whaaaaaaaa
(step-sliding trombone sound)
Is there a way to change military time to regular time?
Which buttons do you press to enter day/time?
Can you set it up so when it starts up and is recording the screen goes off sooner then 3 minutes? I don't like the distraction of seeing the screen on and recording.
+flexor212000 They have a new Firmware, and the choices are 1 minute, 3 minutes, and 5 minutes or Always On.
Great Video, Thanks
Thank you!
I have one and love. Great video
thanks for the reviewing bro! I think I'm going to get it. Just one question tho, does it let you know when the SD card gets full when recording?
the dash cam loops forever, deleting the oldest file and overwriting continuously
WDR is Wide Dynamic Range, Not widerscreen.
Mine keeps shutting down even though it is plugged in when I try to connect my phone to its WiFi can anyone help
😂😂
What´s the differece between "Auto Power Off" and "Delayed Shutdown" funciton? Tks
the auto power off isn't letting me change it from off anyone know why?
What about Brightness of buttons
My date time resets every time when power is off.
brilliant movie
I updated my firmware to the expert version, but when I look in Video settings there is no motion sensor or parking monitor?
The latest firmware does not have "motion sensor" and "parking monitor". Because users have found it causes corrupt files which sometimes defeats the continuous looping of the video, because the device can't delete the corrupt file.
+Poolarity oh okay, that's strange. Maybe they didn't update the website yet. Cause both firmware updates are still on the website. That's a bummer
Joey Hunh Even when it was in my firmware, I turned off G-Sensor and Motion and Parking Monitor. All 3, I rather it be reliable.
i need to reconsider, i wanted the g sensor
+winkawak I don't think it's worth it, if you read comments and forums the G-Sensor causes a lot of file corruption resulting in the looping to break
why my rexing date and time always reset?
Very helpful; thanks
Does anybody else have an issue with the date format. even if I select MM/DD/YY it still pops up on the screen as YY/MM/DD. any idea if I'm doing something wrong or not?
No, my problem is as soon as I turn it on the clock jumps 5 hours. Yup got to reset it each time. rexing hasn't got back to me about it.
Is there a app
great video thanks
Rexing should have these videos. I would never buy from them again.
Thank you.
Can I play the video on a ps4?
Ehy my camera record every minute??
Does that red recording light blink the whole time it's recording or can you turn that off? In the daytime it wouldn't bother me, but at night it would.
the red light on the buttons continue to blink, you can put black electrical tape over it, they don't turn off. The screen can be turned off, using the buttons or using the screen saver menu option to set it to turn off after a duration of time.
I have a trekpow dashcam and it had the exact same setting us yours
Great help 👍
Thanks for making it easy for an old fart like me!
I hate when people use age as an excuse for laziness. I'm older than you . I'm just not lazy.
Calm down old timer. If you are too lazy to learn how to use a dash cam and blame it on your age, y ou are certainnly too old to get your panties in a bunch. .Calm down old timer. Rest. Have some warm milk. .Do NOT drive a motor vehicle. Maybe you should put that dash cam on your wheel chair you old fart
You don't have ANY of your info posted grandpa. Hey, now you have my interest .Anyone who can mow five lawns while in a wheel chair deserves my admiration, Why don't you make a VIDEO of it and put it here so we can all see a lazy moron in a wheelchair mowing lawns. So you mow lawns for a living for tips from your neighbors. Gee, YOU'RE a real sucess story old fella.
I can tell you are not older than me, you don't have any respect for anybody else except your sorry ass. What a pathetic excuse for a human being!
Keep mowing those laws old fella. I hope the tips are good.
Good grief. Focus!
You showed everything except the most important part which is how to play videos. Then you don't even at least put it in the description so viewers can easily get to it. DISLIKE