Це відео не доступне.
Перепрошуємо.
-Building Precision Sight Tapes Part 1-NERDS ONLY!
Вставка
- Опубліковано 16 сер 2024
- Video 1 of my OVER THE TOP process to get the best sight tape possible.
•Archers Advantage:
archersadvantageonline.com
•Last Chance EZ Press:
amzn.to/3pBT2EQ
•Last Chance Drawboard:
amzn.to/3jDa3dT
•Last Chance Archery Draw Scale:
amzn.to/3vOitEq
•Grains Scale:
amzn.to/3Bfr9o8
•Husky Caliper:
amzn.to/3Bi0FCB
0:00 Intro
1:30 How to add a setup
2:16 Input arrow set-up
5:10 Input sight information
8:46 Input Bow information
11:10 Calculate bow speed***
14:17 How to print your sight tape
#MATHEWSV3 #Hunting
Best video I’ve seen so far on dialing in sight tapes! Thanks man!
Thanks buddy
Searched everywere and you're the only one I've found who explained each part...and you did it very well. Love the attitude as well. I now have better sight tapes for Park City TAC this weekend. If you're there, I owe you a beer.
I wish it didn’t take me so long to find this video, but I’m glad I eventually did! Great instructional! Much appreciated!
🙌🏾
So glad I subscribed. Would of never known about this. I've always had issues with factory sight tape. Anytime I'd needed like 23, or 27, or 32yrds always off. Can't wait to take the time and get an accurate tape and hit what I'm aiming at... Go Blue baby...
Man I was struggling with sight tapes from Archers advantage.... this set me straight and I got it setup right!
THANKS!
🙏🏾
Bro i've had this program for a very long time and made many many tapes....i've often wondered what i wasn't doing just QUITE right, albeit very close just not close enough... next level explanation man... thank you so much for showing us this step by step... back to the "draw" board .....actually, peace :)
Glad I could help🙏🏿 keep putting down those big animals. 💪🏿
Thanks man this helped so much I done it off of chrome and didn’t weigh my insert and it made me have to shoot the 40yd mark at 35yd. Crazy improvement
I’m glad it helped 💪🏾
Great Video, appreciate you taking the time to discuss your faith and stressing the importance of accurate measurements
Thank you for your support!
Very helpful. Thank you for doing this step by step.
Wow!! You, sir, are speaking my language!!!
That’s a major part of my archery enjoyment - is dorking out on the dimensions, numbers, formula’s, etc. Great video!!! Just sub’d.
Thanks brother
Check and balances! So, I’ve had archers advantage for now a little over a year and let me tell you! I thought I was savvy with the program and that my process of building tapes was watertight…wrong!!! Hahaha all good. I watched my brothers video and checked out his process and well little did I know I would pick up a few solid tools for my toolbox. I followed his measuring process with my calipers and used his process for averaging speed and BAMCIS…I nailed 60/70/80 and at 90 I grouped but wasn’t dead centered no issues or worries in the past 2 years I’ve never released an arrow past 60yds until now. I messaged good ol privileged bowhunter he offered to call me when I got stuck, I was able to figure it out before he called and I was truly thankful he would go to the extent to make time to help a fellow archer. Like, Suscribe hit the bell 🔔 you guys will benefit from his style and hospitality. SEMPER FI…
Glad I could help bro🤙🏿
Glad to find someone else who nerds out on this stuff like I do. Good stuff man!
One thing to note, and I know you talked about the disclaimer and driving yourself crazy if it's not "actual size" or "100%"... Don't trust printing from your phone, use a computer. Especially if your phone doesn't have a scale feature on the printing app. It will more than likely fit to page and you'll drive yourself crazy like I did. Lmao!
Probably the easiest way to make yourself go crazy lol
I just got this software today, you're video is very very helpful. Thanks mate.
Thanks so much. I even emailed AA and didn’t get this explanation. Love your content
Glad to help 🤙🏾
Very helpful and professional explanation. Thank you!
🙏🏾
Another awesome video man. Getting ready to set mine up tomorrow. Good luck this season.
Thanks! You too!
@@PrivilegedBowhunter this video was very informative and helpful i don’t know it all but i know a lot with archery and keep looking to improve but i have couple questions id like to ask you about measuring the marker for the axcel landslide being they have two is there a way to reach out to you one on one
This is so Damn good. Man, all the questions I've had in my head about this process you answered to a T. I'm shooting a Mathews V3X and the Black Gold Pro with the exact same pin config. It's like you were literally reading my mind and bringing up specific things as I was asking them to myeslf. Great job dude, keep putting out this content. Do you have an IG account? I love when I find youtube content creators like you.
I'm glad to be able help? IG is Privileged_bh
@@PrivilegedBowhunter Thank you sir.
Thanks so much for clearing all this up. I was looking at the website on the advice of a friend of mine but was very confused as to how to actually measure and do everything. Great video !
I'm glad it helped💪🏿
@@PrivilegedBowhunter Going through this in depth to make sure all my measurements are correct. My measurement for the nocking point to the berger hole is exactly 28.3 inches. I have a hoyt ventum 33 and the settings on the cam module it says it's supposed to be 29.5. Adding an inch and three quarters to my measurement it comes out to 30.09 inches. From what I gather from your video I shouldn't pay attention to what draw length it says on my cam module. Am I getting this right or am I missing something ? Thanks in advance
Great video and explanation. Definitely perfect for this archery nerd! Keep it up 👍
Thanks for watching fam
Thank you I had so many questions and you smashed it out of the park.
I just stumbled across this… Excellent thank you very much I found this helpful and a little intimidated to get the numbers but I'm gonna work on that.
Glad it was helpful!
I don't have a draw board so I have to ask a shop to do these and not everyone is so precise. I find it's very close but sometimes needs some tweaking. great video explaining this
I know the pain. I made one with an old trailer wench. It worked well but was bulky
Thank you for walking through this ... I love your channel! I've spent so much time trying to get my sight tapes perfect and seemed to always be off by 3 to 5 yards at distance. Now spot on! Thank you again!!!!
Great video! Best $12 I've ever spent. First sight tape I printed was dead nuts on out to 100 yards! Probably good even further, but my range only goes to 100 yards. Thanks very much.
Signed,
New subscriber.
Thanks brother, welcome to the family!
This was amazing. I watched the second part first to build a little excitement for myself. Appreciate your guide. Man I wish I was on Hawaii I’d love to have a set up with your guidance. High key man you would crush it at tournaments.
Let me know if you ever make it out here🤙🏿
Thanks brother, appreciate the help.
I love this video and Im am really excited to geek out on the measurements. lol
Nerd out bro🤓
Nice job man! Thanks!
Thank you.
Thanks for the great explanation. Looking forward to running into you at the CORP archery range one day.
Best breakdown of archers advantage I’ve seen
Thanks for watching🙏🏿
Good video, thank you!
SUB’D!! Cheers from North Carolina. Airborne!
Right on bro, thanks🙌🏿
Question for you - why do you add an 1 3/4 when measuring from your nocking point to the berger center? You didn't really explain why.
excellent video and explanation much appreciated
I'm continually fascinated at people that come to 3-d shoots and have " pencil" marks on a piece of paper? on their $300-400 scope setup. Although I am only an average scoreshooter I have to know that sight tape is right on.. I use an old program " tapes" that is very easy and very accurate. Paid like $12 years ago to download and still use it.
Amazing details, one question though. Why the + 1.75" to the distance from the berger hole to nock point? 🙏🏻🙏🏻💪🏻💪🏻
Good video bro. Love your sight name too. Been playing with this thing for a few weeks and keep coming up off a bit. Wanted to see what you thought. 1st is the distance from lens to peep to the middle of the peep or to the edge (eye side of peep)? I'm sighting in at 20 and 60. So, my 20, 30, 40, 50 and 60 line up well bit 25,35 & 45 are off by about 1 yard. Have tried to sight in using 30 & 60 as well as 40 & 60 with no luck.
Thanks for watching brother, I go middle of peep to pins and center of arrow at full draw to center of peep. I sight in at 20 and 80. You really have to verify that your 20yard mark is absolutely perfectly.
@@PrivilegedBowhunter ok thx. I'll double check everything. I'm only going to be shooting out to 45 for 3d but could grab an 80 yard mark just to see. I shoot lots of spots at 20 so I feel really good about that distance/setting. Thanks again
🙏🏿 be blessed
Great video this is my second attempt at this. I do not see the option for printing actual size or 100% like recommended. I have tried many times but tapes aren’t even close. Maybe that’s what’s happening??? Do some printers not offer that feature? Anyway if anyone has answers please let me know, thanks!
Great videos appreciate you sharing your knowledge
Just trying to help🙏🏿
Hello again. Why not measure from the deepest part of the bow grip to the closest edge of the string? If you don’t mind, when you have a moment, I’d like to ask you a few things as I’m practically done with the process of taking all necessary measurements but I have never used this software. Let me know how/when we can get in touch. Keep up the good content 👍
Instagrams a little easier for me to answer questions
Getting a Validate data message. I am 100% sure my data is accurate and complete. I entered my distance measured with the caliper and getting that error message. I read it might be because its a roller sight, Fast Eddie. However I have that selected as sight type. I have messaged AA but if anyone has run across this. Thanks
Nice job brother
🙌🏾
My CBE sight is a wheel, does not have the up/down moving scale.
I think there is a little error in how you are measuring your draw length. AMO or ATA standard is +1.75 measured from the farthest forward point or the " throat" of the grip, not the Berger button. I think if you use this method your measurement on the bow will match your draw length measured on your body. Provided your draw length was measured with the correct method. Let me know what you think.......
Why did you add 1.75 inches to the draw length measurement? This video is on point! Thank you for making it.
It’s the AMO draw length equation
@@PrivilegedBowhunter do you still need to add the 1.75 to your draw length if you went off the mod letter for Mathew bows? I use mod (I) so 27.5”; so I should enter 29.25?
Just started using the software and your video is by far the best I’ve seen on explaining what to do and how to get the right numbers.
Thank for this video. Coming back to this video after watching it when it was first released. Awesome work
Great video and thanks for the time to explain. I also have the Black gold pro sight, what settings did you input in the site configuration? Thanks
Thanks for watching, sight type should be inch.
Wish archers advantage let me put in my actual draw weight. My bow is at 84lbs and it will only let me put 80lbs.
Must save video.... thanks
Happy to help
Awesome work and love the hunt for perfection - that we own the animals, we hunt.
I'm running a Axcell Accutouch 1pin sight (not the carbon version), and since I'm a Dane, I use meters. What should i then use in sight conf?
I'm going to swap my 4mm FMJ Injextion, with the new Victory Vap SS and my stock sighttapes are totally off, since we in Denmark are only allowed to hunt Fallow/Reddeer with a
Hi, in your case select metric in the sight configuration.
Why are you adding 1.75 inches onto your amo dl
Draw length is calculated pivot point to nock point at full draw + 1.75 inches.
Thank you for such a great video. To figure out the actual brace hight, you would add 1 3/4” regardless of the brand/model of bow or this is just true for the bow you have? Thank you
@@mansalaija it’s true for all the mainstream bow companies
Got it! Thank you. I think I need some guidance in order to sight in my bow sight as I have only done it one time (new sight) and then went to shoot 3D but at long distances (45-65) I was off, hitting low and to the right, all the axis are spot, the bow is tuned
and I’m a decent shooter. I have only used fixed pins sight in the past.
I have a MBG 3 pin pro hunter hd sight with two needle indicators. This is what I did: I moved my bottom (40 yard pin) close to the level so I can get more yardage just to practice long shots. Then I put electrical tape horizontally on the target at 40 yards and sighted in by moving the housing accordingly until I was hitting the middle of the tape. Then I sighted in my 30 and 20 yard pins by moving the pins and not the housing and using the same electrical tape placed horizontally on the target at 20 and 30 yards.
After doing this I only used my 20 yard pin to find out the drop of the arrow shooting from 20 yards and 60 yards and making a small line next to the top needle indicator when at 20 and when at 60. Later I matched this two lines to one of the sight tapes that came with the sight and once I found the right tape I put it on the sight bar aligning the 20 yard mark with the top needle indicator and the 40 yard mark with the bottom needle indicator. Did I forget something? Was my process good?
I have archers advantage but I have never made a custom sight tape. I don’t have a draw board either. Thank you.
I keep getting a " validate data or select harder cam" error when filling in sight in calculated speed. Anyway round this ?
Thinking of getting this program, running spot hog fast eddie xl and it can be a pain to do 20-60yrd quickly without having bad shots/ fatigue in-between shots. Will having outserts matter in putting in the info? Vap SS 300 spine with 75 grain outserts. Thanks!
why do you add 1.75 inches to your amo drawlength?
Is there a benefit to this method over marking at 20 and 80, then comparing that gap to the factory tapes included with my sight and choosing the one that matches?
Yes the in between yardages will be more accurate
I have a wheel for my slider that my sight tape goes on, and when I measure out my distance in inches is it going to be different than yours would be, because my calculated speed is coming out to like 180 which is totally off but the tape looks similar
What's the name of your sight?
Im using a spott hogg fast eddy sight do you take the tape off the wheel lay it flat and measure?
For point weight, I thought there is a separate section in archers advantage for the insert information? Why would you add the weight of the insert to your point weight if the insert weight is being accounted for in the insert section. Im Confused
There is no insert information section. Setup-Arrow Configuration-Point details
@@PrivilegedBowhunter sorry you're right
Appreciate the step by step tutorial on Archers Advantage! Random question, what limb dampeners are you running? I'm shopping online for my new Atlas and am not sure what will fit these Mathews wide limbs. Thanks!
Thanks for watching, I'm using the limb saver brand.
Great video! Where does the 1 3/4" come from for the draw length? Is that universal for everyone?
It’s the AMO draw length standard
@@PrivilegedBowhunter very cool. I never knew that. Thanks for the response!
Awesome video! I also spent some time in Hawaii, at K-Bay. Always tinkering with my set ups so just wanted to hear your thoughts. I set up some high foc arrows last season and don’t get a ton of range out of them, maybe 50-60 yds. Would this be much of a benefit seeing how my range is so limited. Thanks man
Thanks for watching, what type of hunting do you do? Western spot and stalk at longer distances or tree stand 30 yards and in?
Mostly tree stand hunt. I do hunt some out west and 3d longer stuff just for fun. I do realize with those arrows a yard or two difference is a big deal at distance just that distance is a little shorter.
If you're just treestand hunting, I say the heavier the better. Trajectory isn't much of a factor 30 and in when you know the exact range of the animal. However I just finished a goat hunt with 540 grain arrows and I wish I was shooting 450 grain arrows lol. Those goats were fast
I just purchased this so I'm still learning how to use it, Not to sound like a nob but... what is amo d.l. and speed?
No worries, AMO DL is the standardized way to measure draw length .
•It's measured at full draw from the berger button hole to the nocking point. Once you get that measurement add 1 3/4" to it.
- let me know if you have any more questions.
Does the IBO and AMO speed matter.
Negative, when you complete the "sight in" tab the calculated speed that you get will automatically be input into the "bow configuration" tab as current arrow speed.
My bow maxes out 70 lbs draw but I shoot at 60 lbs . Do I need to crank my bow up until the limbs are fully seated to the get the draw weight or are saying to make sure you get an accurate reading of your actual operating draw weight?
Make sure you get an accurate reading of your actual operating draw weight.
@@PrivilegedBowhunter Thank You! Love your scripture on your Bow idea!!!
@@CYOTsNiper 🙌🏿
Ive had AA for a while and just got calipers and have input everything to the 100th of an inch. When I do the sight in part I try to do my 20-60 which is .865 apart and it always says “please validate data or select harder cam.” It makes no sense to me, ive tried every possible input and even the one that’s used in the directions and it always says the same thing. I was messing around manually and the AA 238fps tape matches perfectly with the 273fps that came with my black gold sight. So far for me I haven’t been able to work it out but Ive input everything as perfect as possible
Did you input;
-range 1 as 20
- range 2 as 60
- mark 1 as 0
- mark 2 as .865
@@PrivilegedBowhunter yup exactly what I did. I think it’s just tweaking out for me. 0-.865 , 1-1.865 , 10-18.6, everything I can think of and it says the same thing every time
@@PrivilegedBowhunter I emailed them and just got a response so hopefully he can help me figure it out
Maybe try logging in on another device like your phone or tablet
Hit me up on IG I'll try and help from there.
Privileged_bh
I've input all off the data correctly and this program hasn't been as accurate as another one I prefer.
Hi
Appreciate your videos
Question
I subscribed to Archer advantage this am
How long does it take to activate your account
Thanks
Jim R
Thanks for subscribing, I received my account immediately
Ladies and gentlemen America's one and only black bow hunter hahaha