Hello, very good video and thanks oor that I was finally able to make this weapon in cardboard and I wanted to ask you if you could make the mp7 in cardboard, please greetings from Argentina
Actually, this gun is a bit different from the UZI that I've built. So maybe I can do it for you but please don't push me on time. Because of the time it takes to complete a gun, drawing the video editing template also takes a lot of time. So you will have to wait 🙂🙂🙂🙂
I just want to make the trigger work most realistic. And the bullet does not seem to have changed significantly, with no detonation. I still try to improve. Thank you for watching my video😁😁😁😁
@@ToyDIY the very first little tube you made at the start of the video...you wrapped it around a rod of some sort. Also, how can we know the length of the pieces of paper. You tell us the width but not the length
No. Spring not attached to the wooden stick. You need to attach the piece of paper after attaching the spring that I did in the video. It helps the spring move inside the tube without being thrown out 🙂
@Eray : The mechanism of the bullet is not the same as the real bullet, so it is also difficult to describe in the video. I just wanted to make it look as realistic as possible. There are a few types of guns that I also make simple. Sometimes we have to change for fancy, right: D 😘😘😘😘
Amazing. I really need the names of these guns. I also plan to come here to make more Neft Guns for my son to use. Before I crafted a Neft gun to shoot the ball, he was very happy using it. Sorry, I didn't draw the template for that video. Next video I got the idea. This gun will appear after that. Thank you
Please make next video on vz58 with bayonet shell ejection and fully automatic and semi automatic mode please make next video on it this is my 4th request on this gun i hope this time you'll make it
I really want to do it but I really don't know how to hide its working mechanism inside: D. But for sure there will be this gun. It represents a historical generation 😁😁😁
Oh 2 3 drops are just illustrations on the video. You have to use more, which is easy to observe, because my camcorder cannot see inside the paper tube.
There are some springs that must be purchased outside. But the spring to hold the trigger you can get from within the ballpoint pen. The trigger only uses thinner cardboard to put them together. All materials, I used only cardboard. Or you can buy paper to make book covers.
Mother Russia is proud of you....
and so are Sergei Mosin and Emile Nagant...
Here's a sub, comrade!
Thank you bro 😍😍😍
One of the best detailed gun by him
Thank you 😍😍😍😍😍
@@ToyDIY thank you , where did you get them if you don’t mind
@Abi Pask: Thank you. You can't find the 2nd gun on youtube. Because I totally do it 100% 🙂
@@ToyDIY missing templates
Cool art , do you have the templates for this ?
Wow soooooooper😃🥳🥳🥳🥳🤒🤒😷😱😱😱😱
Thank you for always watching my videos 😘😘😘😘😘
Full support 💪💪💪💪💪
Very nice please make the winchester lever action 1873 next
I plan to do winchester. There will be videos in the next few weeks
MY FAVOURITE GUN!
Coolest mosin nagant i've ever seen
Thank you verry much bro 😍😍😍😍
Make winchester 1873 with Shell ejecting and springs brother!!
YES MAKE THAT GUN!
yes
Hello, very good video and thanks oor that I was finally able to make this weapon in cardboard and I wanted to ask you if you could make the mp7 in cardboard, please greetings from Argentina
Actually, this gun is a bit different from the UZI that I've built. So maybe I can do it for you but please don't push me on time. Because of the time it takes to complete a gun, drawing the video editing template also takes a lot of time. So you will have to wait 🙂🙂🙂🙂
Bro I promise in a short period of time you will hit 1million
Thank you for your encouragement. By 2021, I want to expand on the topic of wood carving and knife making. Hope people continue to support
@@ToyDIY bro we will fully support you.You are the best man
Thank you
very nice,please make an AK47.
The best gun that I see
Thank you
I've shot a mosin once, they're a really nice gun.
Brazil love your🥰
Thank you 😍😍😍😍😍
Which spring you used for magazine in dragnuov svd
Spring steel has a diameter of 0.6mm
Amazing and this is impasable.
Thank you bro 🙂
@@ToyDIY when the school vacation is coming. I will make this gun with my dad.
Good luck 😘😘😘
Thank you 친구
There’s not much firepower but atleast mother russia/ motherland is proud of you! Good job
That’s my dream gun🤩🤩
oh i love it soo much!😍😍😍😍😍😍😍😍😍😍
i,m gonna make it too and thanks for diy make it!
and i love your videos 😍😍😍😍😍
Thank you. I would be happy if you could share the video for me
@@ToyDIY k
YOU ARE THE BEST ONE 😊😊😊😊
Thank you bro
You deserve more subs
I'm still looking forward to it. Hope you guys share the video for me 😍
Very Nice,after a very long,I'm seeing new DIY,keep posting new
I just want to make the trigger work most realistic. And the bullet does not seem to have changed significantly, with no detonation. I still try to improve. Thank you for watching my video😁😁😁😁
GOD 999 โหดเกิน
Thank you
file not found?
In the description
When you go inside the file, it says “file not found”
Thanks for the template
😍
Lol
Do yo have the template?
What did you use to make the first tube? Or what is the diameter of the stick you wrapped it around?
You want to ask about the gun barrel?
@@ToyDIY the very first little tube you made at the start of the video...you wrapped it around a rod of some sort.
Also, how can we know the length of the pieces of paper. You tell us the width but not the length
Because I realize that not all of us can use the same paper thickness. So the diameter of the tube paper I note on the template.
hola bro, podrías hacer un rifle G98 porfavor 😅
HABLA EN INGLES
Được đó nhưg mà biết làm súng
Hi bro can you start making Slugterra blaster please reply
Currently I am working on STG-44. I promised to do it for you after this video. Please ưait. Thank you
Thank s bro
😎😎😆
@@ToyDIY Hi bro you have to make slugterra blaster please
Oooohhh its youuuuu!!!!
Im from the deagle commenter guy
Thank you
@@ToyDIY no problem
you sitll remember i LOVE it
Thank you bro 😍😍😍😍
Great
Do you think you coild tru to make a normal Bolt hunting rifle? Cant find good videos of it and you make your hund look so amazing
Yeah. I took a look, but can you give me the name of a gun? 🙂🙂🙂
@@ToyDIY maybe a savage axis?
OK. But I can't do it for you right away. I have too many projects to do :(
@@ToyDIY yes of course! Do yours man, you dont need til hurry
ok 😁😁😁
Anh làm là xo bằng dây chì nào vậy ạ
Anh ơi, cái thanh đầu video kia có đường kính bao nhiêu mm vậy? Ở khúc 1:06 đó😅?
Nice video
I just wanna ask tho
The templates aren't showing up
Good
Tudo é feito com papelão????
AWESOME
Thank you
@@ToyDIY no problem
Great Bro 👍👍👍👍👍
Thank you 😍😍😍
@@ToyDIY welcome will you make simple sheel ejection awm
I have made AWM videos already. You can watch videos in my channel: ua-cam.com/video/d701IfUTl_c/v-deo.html 😁😁😁😁
@@ToyDIY thank u soory I can't see so sorry 😔
Uhhh can i make this guns without shell ejecting!? Because collecting shells is very boring.
Very good
@@ToyDIY but thats not a answer
You have an idea that I will do it, I am very supportive so I answer like that :) 😁
Hey bro, I'm making this Mosin Nagant, but I'm not getting the trigger mechanism, in this part 3:53 am I supposed to stick the spring to the stick?
No. Spring not attached to the wooden stick. You need to attach the piece of paper after attaching the spring that I did in the video. It helps the spring move inside the tube without being thrown out 🙂
how did it go?
What kind of glue do you use?
What kind of paper did you use when you did the rolling part
He probably used *P A P E R*
Thx bro but this gun is very complex and hard pls make simple mechanism guns and easy templates with cardboard thx ffor video:)))
Well every kind of bolt action rifle has similiar mechanism
Thx
@Eray : The mechanism of the bullet is not the same as the real bullet, so it is also difficult to describe in the video. I just wanted to make it look as realistic as possible. There are a few types of guns that I also make simple. Sometimes we have to change for fancy, right: D 😘😘😘😘
@Fadli: The rifles always have a wonderful beauty. I realized this when I made the Lee-Enfeild. Surely I have to make enough rifles from my WW2 😙😙😙😙
good job, please do you have the templates? google drive is empty
Which dry glue you use please name it
Super Glue 502 ASIA BOND 🙂🙂🙂🙂
@@ToyDIY thanks bro
You can refer to this link: www.aliexpress.com/item/32664077496.html
Hello, I'd like to know the size of the springs and the lenght of the wire
The length of the spring is 8cm outside diameter 5mm, inner diameter 4mm 🙂
What kind of glue do you use
I use 502 glue and gun glue
How long is the gun?
I wish I had the skill to make this!
A SVD Dragunov, please.
There is already a video. You can find it in my channel 👍
could you power it up. I like this gun
Thank you 😘
Scope is optional right?
Oh no. I only do simulations with scope 😁
what paper you use?
Cho em xin link mua giấy cứng này đc ko bác ơi
Inbox ở link fb trong mô tả mình gửi nhé.
@@ToyDIY cảm ơn bác nhiều nha
ok 👏
Are you really made Slugterra blaster
I am working on STG 44 already. I have yet to fulfill your request :)
@@ToyDIY ok bro bit make it fast the make Slugterra blaster please
These blaster was my dream .I hope you make it fastly 😗
Is this *Copy* will make someone hurt when we shoot someone?
Oh no. It is safe for everyone. I shot the cups at a distance of 3m. Beyond 5m, bullets tend to fall 🙂
The document doesnt appear in drive, do you know how to fix it?
Hi bro good job but can you make slugterra blaster please I request
Amazing. I really need the names of these guns. I also plan to come here to make more Neft Guns for my son to use. Before I crafted a Neft gun to shoot the ball, he was very happy using it. Sorry, I didn't draw the template for that video. Next video I got the idea. This gun will appear after that. Thank you
Are you really made blaster
Please reply
Are you start making Slugterra blaster please reply bro
At 7:05 you use some other dry glue it is not 502 asia bond
Yes. However, you have to add more glue
Please make next video on vz58 with bayonet shell ejection and fully automatic and semi automatic mode please make next video on it this is my 4th request on this gun i hope this time you'll make it
why the drive not working ?
do you have any other link ?
Hi and Can you make a Mcx Shell ejecting with the motor shooting faster plzzz
So sorry. Currently, I'm overloading requirements, so I can't promise :)
Next time do PPSh 41 russian smg using dc motor
Where did you get the pieces that aren’t made from cardboard please ?
It is a form of cardboard, usually appears in book covers
I SAW ANOTHER COMMENT PLEASE SIR MAKE WINCHESTER LEVER ACTION GUN WITH SHELL EJECTION. VERY GOOD SIR I LOVE YOU
There will be videos for Winchester soon :D
Will you make a AX-50 sniper? Please
Seems quite similar to the M200.
Why is the Templates Folder empty?
Ở 1 phút 3 giây của video có ghi bản mẫu ở phần mô tả nhưng khi lướt qua sao e lại ko thấy bản mẫu vậy a
A để link rút gọn đấy. E chưa xem kĩ thôi
@@ToyDIY vẫn ko có a ạ mong a có thể cho e biết cái link đó đc ko ạ
A vừa cập nhật lại rồi nhé. Không hiểu sao lại sót ☹
How can i get the template, the folder is empty
where's the template??
i click the link but its empty
Can u make ppsh with drum mag ???
Certainly there will be 😁😁😁😁😁
Not to make fun of the UA-camr here/Toy DIY The mosin nagant variant he made was the (Mosin Nagant 91/31)
from 1931 used as the mosin nagant sniper.
Hi is this a 1:1 scale of the real gun? Size wise
hi bro where can i find the templates?
link bản vẽ đâu bác ơi
yo i tried to open the templates but it says the folder is empty
im not gonna lie the bullet casings are huge
Yes. The shell size is 1.5cm 🙂
@@ToyDIY I'll see if I can improvise and make the bullet itself a tad bit larger so it looks a bit more realistic :)
Great 🤗🤗🤗
The link for the template doesn't work
where is the archive?
Can you make a m1 garand?
I really want to do it but I really don't know how to hide its working mechanism inside: D. But for sure there will be this gun. It represents a historical generation 😁😁😁
File not available You get to the template place and it says file not found
What did you use to make the scope because it confuses me and if you are active send me links if you got it from a site or bought it from a store
Also is it possible to make a reticle
And can you make a separate tutorial on the scope, I don’t mind if you say no
can I replace the super glue with another glue?
Of course. Use what you can find around
@@ToyDIY thanks bro
Hi, can you share template ? I can't find link
Mình để dưới mô tả đấy bạn ơi
Ủa ôg là người vn á :v nhưng tui thấy phần mô tả ko có thật mà :(( đang làm mosin bắn đạn thật :v
Bạn chưa xem kĩ rồi. Tôi để A4 template mà
Thank ôg nhiều nha, tui lên fb mới thấy :v
đa số đều có bản vẽ, có một 2 khẩu lúc mới làm là ko vẽ lúc đấy thôi.
Mining off camera intensifies
Thank you so much. I am not good at this. I just try to make it as clear as possible 😜😜😜😜
Hello why did the template says that it dont have any file
Nice, but your google drive is empty and the template isn't there
the template is gone
Sir please please please make Winchester 1887 gun using springs and elastic band
I will make this gun in the next 2 or 3 videos. Hope you support😁😁😁😁
hey i open the file but it says that its empty could you help me?
Thanks for dry glue link but tell me how to use it for paper tubes im wondering that how can just 2 3 drops make a paper rigid
Oh 2 3 drops are just illustrations on the video. You have to use more, which is easy to observe, because my camcorder cannot see inside the paper tube.
Nice work make one for me please thanks much
I wanna make this but there is to many parts I don’t have :(
You mean there aren't enough cardboard
no i mean i dont have some parts like the moving parts (the trigger) or the spring
also i wanna show you the guns i made from your channel but they are just pretend so they cant shoot but they are good models
There are some springs that must be purchased outside. But the spring to hold the trigger you can get from within the ballpoint pen. The trigger only uses thinner cardboard to put them together. All materials, I used only cardboard. Or you can buy paper to make book covers.
oh ok love your vids by the way (still waiting for that P90)
Thickness of cardboard please
Type 1 wave layer is 4mm
Type 2 wave layer is 7mm
its shell ejecting, not push the shell
Calm down he’s vietnamese
anh ơi cái tệp ở phần mô tả em bấm vào nó ghi là không tìm thấy tệp. anh có thể sửa lại nó được không ạ
pleaseeeeeeeeee make kar98k with shell ejecting
so sorry. K98 I will, but not now :)
Cool! But where are the templates? I need them please 😭
umm sir thier is nothing in the template