A wonderful opportunity to record details of a complex procedure by a generous guy with a wealth of experience, spoiled by the music drowning out his commentary! Thanks for the video and I hope you continue to make more, but please be more respectful to any guests kind enough to share their knowledge and expertise with you, by not drowning out their commentary with music.
I was so focused on what he was saying I didn’t even notice the music. Mind you I’ve been married for 45 years so I’m used to tuning out background noise. That’s what my wife tells me anyway 😂
Thanks Matt. We can all benefit from your knowledge and experience. I've been balancing through vacuum. I will proceed with this method. Respect..... More videos please !!!!!
Thank you for this video. This is the first time the shorting method was fully explained. Many talk about using this procedure, but they never explain exactly what to do after shorting the plugs.
Thanks Matt! This is the same procedure we used on our old Brit twins. One issue I've seen on my R100 has been with the chokes on the carbs...they tend to not fully seat against the stop even with adequate cable free play. Balancing this way makes for a very smooth running airhead. Perfect!
Great video! The “shorting” method always made me nervous. Definitely look forward to trying it come spring time! Hopefully more of these type videos are in the works! Safe travels friends!
Balancing the carbs in this technique is great but the way which is shorting the sparkplugs is frying the ignition control unit(ICU)! I own 1995 R80 GS and never had a good balanced carbs by using carb balancing devices which uses the suction ports under the bing carbs.But when I tried to short the plugs my ICU has fried!So ; u can just take the spark plug cap off and stop that cylinder and do the carb tune and this does not harm your electronics.But when unplugging the spark plug cap use 2 wooden sticks for not to be shocked and pull them off fast and away from any shorting surfaces of your bike ,so no sparks can jump on your bike.Listen to the other cylinder fast and than plug the spark plug cap quickly on it's place.When I tuned by this way my new ICU did not fryed out and also a smooth and perfect idle is just happening.Also my ride is so enjoyable now.
I had an R75/6 for several years. After some practice it was so smooth and ran strong. . I rode several others that shook like crazy. Even one tuned by a local "expert". I could keep up, flat out , with R1000s. There is nothing like getting to know your own bike intimately. I fussed over it every 1000 miles. Maybe ten times a year.Intimidating at first, It became pretty routine. This video is very nostalgic to me.
Thanks Gents for your fine video. Question. How do you identify the strong / weak side. Is the aim to adjust up the weak side or vice versa, that is adjust down the strong side to match the weak side? I tune my R69S with a Harmonizer (ports fitted). However I do take your point regarding equal vacuum is not necessarily equal power. My bike is super smooth up to about 3,000 rpm. Then gets quite vibey.
Hi I have a 1974 BMW r60/6 that has a problem that nobody can solve. When I start the engine, the rev counter marks 1200rpm and after some time it starts to accelerate by itself until it reaches close to 3000rpm. This happens after 6 to 8 minutes. I wonder why? It have 2 carburetors Bing 1/26/123 and 124. Thanks
Have you inspected the intakes between the carbs and the heads for leaks? If you spray a little carb cleaner around the intakes while the bike is running and the idle increases, you have a leak.
Good video but I prefer using a manometer. A manometer is easier to use and gives a visual reference to what is going on in between both carbs. It also is easier to set up the throttle cables so the carbs are balanced in the transient between idle and wide open throttle.
@@ElmrPhD I drilled and tapped holes for brass tubes to use as ports on the carbs of both of my BMW motorcycles. I cap the tubes when I'm done synching the carbs.
LOL... great content but who ever thought it was a good idea to put music track during the whole process, including listening to the engine, yeah.. yikes
A wonderful opportunity to record details of a complex procedure by a generous guy with a wealth of experience, spoiled by the music drowning out his commentary!
Thanks for the video and I hope you continue to make more, but please be more respectful to any guests kind enough to share their knowledge and expertise with you, by not drowning out their commentary with music.
I was so focused on what he was saying I didn’t even notice the music. Mind you I’ve been married for 45 years so I’m used to tuning out background noise. That’s what my wife tells me anyway 😂
This is the most practical airhead tuning video for me.
I rewatch this occasionally……to remind me of the good old days. Matt. You are the GOAT!
WOWWWWWWWWW!!!!!!!!! Big Difference. The left was pulling 500 RPM more than the right. Vacuum synch was off. Much improved now.Thanks again Matt.
Thanks Matt. We can all benefit from your knowledge and experience. I've been balancing through vacuum. I will proceed with this method. Respect..... More videos please !!!!!
Excellent summation of an oft-misunderstood procedure. Thank you, Matt.
Thank you for this video. This is the first time the shorting method was fully explained. Many talk about using this procedure, but they never explain exactly what to do after shorting the plugs.
Thanks Matt! This is the same procedure we used on our old Brit twins. One issue I've seen on my R100 has been with the chokes on the carbs...they tend to not fully seat against the stop even with adequate cable free play. Balancing this way makes for a very smooth running airhead. Perfect!
Great video! The “shorting” method always made me nervous. Definitely look forward to trying it come spring time! Hopefully more of these type videos are in the works! Safe travels friends!
Balancing the carbs in this technique is great but the way which is shorting the sparkplugs is frying the ignition control unit(ICU)! I own 1995 R80 GS and never had a good balanced carbs by using carb balancing devices which uses the suction ports under the bing carbs.But when I tried to short the plugs my ICU has fried!So ; u can just take the spark plug cap off and stop that cylinder and do the carb tune and this does not harm your electronics.But when unplugging the spark plug cap use 2 wooden sticks for not to be shocked and pull them off fast and away from any shorting surfaces of your bike ,so no sparks can jump on your bike.Listen to the other cylinder fast and than plug the spark plug cap quickly on it's place.When I tuned by this way my new ICU did not fryed out and also a smooth and perfect idle is just happening.Also my ride is so enjoyable now.
I had an R75/6 for several years. After some practice it was so smooth and ran strong. . I rode several others that shook like crazy. Even one tuned by a local "expert". I could keep up, flat out , with R1000s. There is nothing like getting to know your own bike intimately. I fussed over it every 1000 miles. Maybe ten times a year.Intimidating at first, It became pretty routine. This video is very nostalgic to me.
Excellently detailed, orderly, and easy-to-follow instruction. Many thanks!!
Precise and to the point! Thanks for this!
Thanks, Moto Rod and Matt for taking the time and effort.
Matt. You are immortal!
Excellent instruction. Thanks for doing this! I never knew how to do the high speed before.
Thanks dude, big improvement over my clapped out Amal knowledge! LOL!
I don't understand grounding the spark plugs prior to the carb balancing. I liked the music.
Thanks Gents for your fine video. Question. How do you identify the strong / weak side. Is the aim to adjust up the weak side or vice versa, that is adjust down the strong side to match the weak side?
I tune my R69S with a Harmonizer (ports fitted). However I do take your point regarding equal vacuum is not necessarily equal power. My bike is super smooth up to about 3,000 rpm. Then gets quite vibey.
Great film , Great info, Please get rid of the music
Hi Visian. I hope all is well. My right side cuts out the entire engine. The left stays running while grounded. Mercy!
Such a wealthy of knowledge!
Matt....he's the champ!
Hi please advise. New to air heads. Trying this method to tune carbs. But when I try to earth each cylinder separately both cut out. Any advice please
No tech knowledge here, I just produced the video. Best to join the Airheads (Airheads.org) and ask there.
Did you find out the reason and solved the issue?
Thanks Matt!!
Hi I have a 1974 BMW r60/6 that has a problem that nobody can solve. When I start the engine, the rev counter marks 1200rpm and after some time it starts to accelerate by itself until it reaches close to 3000rpm. This happens after 6 to 8 minutes. I wonder why? It have 2 carburetors Bing 1/26/123 and 124. Thanks
Have you inspected the intakes between the carbs and the heads for leaks? If you spray a little carb cleaner around the intakes while the bike is running and the idle increases, you have a leak.
Hi, thanks for the precious tip, I will take this test.Best wishes@@Visian
What about dual plug heads?
Great commentary but the music is VERY UNNECCESARY and DISTRACTING. Bike videos don't need tarting up with junk music!!!!
indeed
Good video but I prefer using a manometer. A manometer is easier to use and gives a visual reference to what is going on in between both carbs. It also is easier to set up the throttle cables so the carbs are balanced in the transient between idle and wide open throttle.
Only if you have some sort of vacuum ports. The old slide carbs have no such ports...
@@ElmrPhD I drilled and tapped holes for brass tubes to use as ports on the carbs of both of my BMW motorcycles. I cap the tubes when I'm done synching the carbs.
Thanks for sharing your knowledge
Thanks for the reminder. I'm trading my faithful '77/7 for a '77RS. I'm driving my Sprinter with the/7 just over a thousand miles to effect the trade.
Is this method also suitable for airheads with electronic ignition? Great explanation though, thanks.
Yes it works on my R100 with Dynatek ignition. You still have to make sure that spark plug wire is grounded.
Great video
great info, great guy. thanks
much appreciated, very helpful
I like your tutorial and appreciatie your knowledge but …. why this terrible music?
Drop the music Please.
Thank you! Merci en français
Great information. Thank you. Video would be much better without the silly music
I'm still trying
LOL... great content but who ever thought it was a good idea to put music track during the whole process, including listening to the engine, yeah.. yikes
Or just use vacuum gauges? Just saying
Only if your carbs have vacuum ports. Just sayin'...
@@ElmrPhD 🤣🤣🤣
Dangerous method and inferior to using the correct tools for the job. You are dealing with 20,000 volts here.