1950 Cub Farmall Restoration -- Oil Bath Air Cleaner
Вставка
- Опубліковано 6 вер 2024
- Danny checked the oil bath air cleaner on the 1950 Cub Farmall and discovered it was clogged with soot. Watch as he cleans all the parts and gets them back into working condition.
#cubfarmall
#oibathaircleaner
#1950cubfarmall
You Can Garden Summit Starts May 10, 2021 and goes through the summer 2021.
www.youcangard...
▶ ▬ EMAIL ▬
To contact me via email, go to:
deepsouthhomestead@gmail.com
▶▬ MAILING ADDRESS▬
Deep South Homestead
P.O. Box 462
Wiggins, MS. 39577
▶▬ PAYPAL account:▬
paypal.me/deepsouthhomestead
(If you wish to support projects on our homestead, use this account)
▶ VISIT Deep South Homestead's WEBSITE
Visit www.deepsouthho...
▶ www.etsy.com/s... We offer seeds, plants and 2 books written by Danny: Sweet Potato Manual and English Pea Manual. These books show how to plant, grow, harvest, cook and preserve these vegetables. The books include pictures that show step by step.
~~ WANDA's NEW Cookbook: From GARDEN to Pantry to Table in the Deep South Kitchen
deepsouthhomestead.etsy.com Order your Deep South Cookbook with gluten free recipes that use fresh and canned vegetables.
▶To Order Deep South Homestead TSHIRTS : www.bonfire.co...
PORCH TIME tshirts and CRAZY DAZES Tshirts are available too.
~~T shirt : WATER IS LIFE www.bonfire.com/water-is-life-2
▶▬ Patreon: All proceeds here goes to our building project -- CANDY CORN CABIN -- Our Off Grid Cabin / deepsouthhomestead
▶▬ CABIN Wish List: www.amazon.com...
▬ Some of my links below are affiliate links, which means if you make a purchase, I make a small commission at no extra cost to you. :-) Thanks for helping our homestead.
▶▬ Deep South Homestead's AMAZON LINK: ▬
amzn.to/2XMw40m
(affiliate link*).
▶▬ Growerssolution.com promo code: DeepSouth This is a 10% discount, valid on everything except shade cloth and EvyAnn. It is unlimited use (overall) but 1 use per customer.
▶▬ LOOKING for a Water Filtration System : Alexa Pure and MY Patriot Supply www.preparewith...
Stainless Spigot: amzn.to/2RKLfmJ
▶▬ Harvest Right Freeze Dryer: affiliates.har...
▶▬Heart T SHIRTS from StellarDays.th...
StellarDays.th...
StellarDays.th...
▶▬Herbal Coffee teeccino.com/d...
▶Visit HOSS TOOL (affiliate link): For ALL your Garden Tools and SEEDS Free Package of Tomato seeds for orders over $25 used code dsh21
www.shareasale....
▶ Visit GreenStalk Vertical Planters __ You get $10 off you order using our link. code word Deepsouth
lddy.no/7pg9
▶My Patriot Supply : www.preparewith... Survival Meals and Gear
▶▬ Renogy Solar Panel Kit 10% discount Promo code: DeepSouthHomestead shareasale.com...
▶Danny and Wanda's KUJO Yardwear SHOES www.kujo.com/?ref=deepsouth promo code DeepSouth for 10% off
▶Canning Kitchen gas cooktop: amzn.to/2PU7ecS
▶Any Questions contact me at deepsouthhomestead@gmail.com
▶ ▬ SOCIALIZE WITH US▬
▶ FACEBOOK Page: Deep South Homestead
www.facebook.c...
▶ FACEBOOK Private Group: Deep South Homestead GATHERING PLACE
www.facebook.c...
▶ INSTAGRAM: / deepsouthhomestead
▶ PATREON: All proceeds here goes to our building project -- CANDY CORN CABIN -- Our Off Grid Cabin / deepsouthhomestead
▶ Brighteon.com www.real.video...
▶ Wanda's channel CRAZY DAZES:
/ @crazydazes
▶ Danny's BIBLE channel --- ALL GOD'S CHILDREN
▶ ▬ COMMENTS▬
If you have any questions or comments, please post them in the comments below. I’m happy to answer questions, and I look forward to hearing from you!
THANKS FOR WATCHING!
#homesteading #deepsouthhomestead #offgrid
I recently purchased a 1967 Cub. After watching your fuel line replacement concerns, I went to do the same to my cub and discovered that the old rubber fuel line was actually cracked. Great call and thank you for making a video of it.
Good morning Danny & Wanda. I love that tractor. Man, you know how to do everything lol. Have a great Friday!
Danny, you are teaching a Master Class in mechanicing 🧰 Very cool 😎🙂🇺🇸
Thank you for taking that line completely off. You had my OCD twanging. LoL
Good morning Danny and Wanda
Good morning brother Danny
Good morning ☀️
Wow glad you knew what to do. My Dad would have. It’s lost knowledge now.
She's going to run like a top after all the tlc.
And I had to smile when you said you had to remember which way the pipe went. My oldest son, who was a Navy nuke, finally convinced me to take a picture of anything I'm taking apart so I know how to put it back together. Woo wee, that has saved me a lot of aggravation. 😁
Thanks for sharing!
A wise son alot of people don't do that. Manuals are expensive and almost all Cell Phones have good cameras.
Thanks Danny!
You made that look so easy even a woman could do that thank you
Wanda's gonna kick that butt for taking over
her She Shed. Lol
Yeah she ain't happy.
@@DeepSouthHomestead most men would build a work shop lol
@@countryboycharlie9793 if I do any more of these I'm sure I will have to build one.
@@DeepSouthHomestead lol I hear u my brother ❤️
Quite a testimony to the quality of those original Farmall Cubs...that it would still be running after all these years even without the best of care and maintenance. So interesting to watch the loving care you are giving it as you are restoring it.
Great job paying attention to detail,most people don’t and they wonder why they have problems,God Bless.
lol my dad used a worn out steel bristle brush that had been widdled to fit in pipe with a metal rod in drilled hole to work it in the pipe;;;;lol;;;;ya gettin it covered;;;lol;;;;
Good morning from Alabama.
It be interesting if the crankcase oil pan is looking the same way.
And I'm betting that it will!
I could watch you work on this thing all day long!
My neighbor in Tn.has 2 cubs he uses for cultivating. Its amazing that this day and age a Cub in good shape will sell for almost what it sold for new. I think a lot of people just like em cause they are reminded of simpler times.
New they sold for around 700 dollars according to my books. They're like 5 times that now.
Yes you are correct. I dont know what i was thinking. On craigslist they go 2500 and up for a good one. More with implements.
@@jameskiley4182 yeah when I'm through with this one I wouldn't take 5000 dollars for it.
Im looking forward to watching your progress. Love old stuff that works good.
You sure are loving that machine Danny ! 👍🙏🏼
Checked out the pcv line on my '49 cub. It sure was plugged up ! Thanks Danny for the video...
Yeah probably the most overlooked thing on the tractor.
The canning kitchen has become the tractor garage. Looks like it’s going to be awhile before Wanda gets it back. Danny Love the care you are taking of your “new” tractor.
Heard that B4 😆!
Biggest thing is waiting on parts.
My goodness it was so dirty it would of messed up all the valves in the engine... Thank goodness your so diligent on checking and fixing things right. Now it will run more beautifly! It can actually breath now lol....
The oil catches it all.
I like some of the old school a lot cheaper to run at times I WasTaught to clean it with gas. Thanks for sharing God-bless
All that gunk is like the arteries of those who don't care enough to eat good safe food.
Blessings, julie
Danny you are so right a lot of tractor owners think "New Paint makes it all ok" they are so wrong the Air Filter assy is a vital link to a healthy engine. Enjoy yourvideos.
granpa used gasoline to clean everything;;;;had several different brushes to help;;;;had no compressor;;;lol;;;aired tires with hand pump or took sparkplug out of motor and hooked to tire to air up;;;lol;;;;
That thing is going to purr so pretty when you get done with it your gonna want to pet it instead of plow with it 🙃🙃🙃😆😆😆🤣🤣😂😂
Awesome information Dan!!
Better tell Wanda to stand back when you crank up that air compressor, cuz YOU DANGEROUS!! 😂😂👍🇺🇸🤠TX
You may want to consider getting an auger that fits snug into that pipe to get all that dirt 👍 as for the vent pipe, maybe set it in a tub of gasoline for about an hour then blow it out
I had to take a wire and solvent and work that tube back and forth, but you can hear the air rush into the crankcase when she shuts down now!
You need to find a round wire brush. If you were my neighbor, I’d lend you one.
Last week you were plowing with it ;) Up here in Tennessee we got a saying "If it ain't broke, don't fix it" LOL!
I'm very picky I want everything like new.
to all you youngins. the air filter will last years and years when the oil is changed and the filter is cleaned.
This type was the best built. No paper ones to buy.
I love that old tractor 🚜 Good choice.👍💖
Next time you're trying to clean something like that pipe take some copper chore boy pads, make sure its copper and not copper plated metal wrap it around rag to fit snugly inside pipe then get a rod from a gun cleaning kit and use a cordless drill it will clean and buff it up in no time I use it all the time cleaning bores of guns after shooting hundreds of rounds of cast lead bullets. Also can use gun cleaning kit, multi caliber on those small pipes and tubing, hope this helps.
I soaked mine in naphtha for a day and blew it out with the air.
Maybe a stiff wire brush would work a little better. I admire your attention to detail❤️✝️
A stiff bottle brush might work to.
I will have one for the future cleaning.
Danny, if you have a old stone set for rebuilding break cylinders is great for using on those air cleaner walls. just watch where there is holes
I have the same problems with ear wax 😆
The crank case pressure wouldn't build up on that motor at least cause the c60 engine has a breather on the oil fill cap to vent crank case vapor as well
Have a friend that has his grandfather's tractor like that it's in dry storage...
That's how things were built, back when things were built to last! If it had been a modern tractor, you'd have had to get the dealer to put it on the diagnostic computer, order half a dozen "maintenance-free" parts (a.k.a. THROW-AWAY parts), and paid a few hundred bucks for the same outcome!
Now that's the truth.
Check the intake tube also and clean the one that goes to the carb to make sure your new carb your getting is geting fresh air and no particulars, just to make sure the oil bath didn’t let anything by!
Wanda she shad will never be the same. make u wonder if the rebuilt it because if they rebuilt it all that stuff would have been cleaned when they rebuilt it
PCV, positive crankcase ventilation. If carbon buildup is bad take it off and soak the line in parts solvent.
Yeah I caught that after Wanda had it up.
Just saying, that's a bold statement saying that nobody checks the PCV line. Positive Crankcase Ventilation for anyone that didn't know what that is
Mornin guys. Danny, what I find most impressive is the fact that you do not have any cuts or scrapes or even bandaids on your arms or hands! As busy as we are, I live with at least one it seems at all times. My massey is only going on 40 years old, but is coming along, getting it field ready and a little prettier. Lucas electrics are the worst. Thats why he was the prince of darkness, and the Irish drink warm beer, they had Lucas refrigerators! Coffee almost done, time to feed the animals, years ago my father in law said they eat first. WWG1WGA MAGA GOD BLESS GOD SPEED GOD WINS.
Is there any way to chemically clean this? Like using some type of soap solution and maybe water pressure if any chemicals are too harsh for it? It's a fascinating machine.
Not really.
@@DeepSouthHomestead 5 gal of B-9 chemical cleaner, it will eat paint and all repaint and look like a new. Sand with some 180 first then 320 paper look like a new one
Similar setup to my old Ford Workmaster
There goes Miss Wanda’s ceiling.
Danny it's beginning to look as though the engine was not rebuilt. It's hard to believe it was rebuilt and not clean the oil filter, change the belts etc. Maybe he replaced the clutch but engine rebuild is questionable at this point. You are working on this tractor like I would doing it right the first time. Take care
Yeah I saw the old parts. Most people don't go to the length that I do. They have the mentally if it ain't broke Don't fix it even if your rebuilding it.
@@DeepSouthHomestead Good to know you saw the parts so you know it's rebuilt. It is a nice tractor for sure especially after you finish what you're doing.
@@ncautoman57 I'm just real picky when I restore something. This is what I went to college for back in the 70s .
@@DeepSouthHomestead I believe in doing it right also. I was a Certified Master Automotive Tech for 40 years. You are doing it the way I would. Take Care
It looks like someone just sprayed red paint, over everything, rust and all, just to make it look good.
That’s what we call a Craig’s list restoration.
@@billybradyjr6008 This one was not sold as a restoration. Just an engine rebuild and new clutch and pressure plate and brakes. I'm doing the restoration myself.
@@DeepSouthHomestead I was responding to Paul Van jager’s comment. All the old tractors I’ve seen on market place and Craig’s list have been rattle can sprayed right over the rust and then called restored? Some people don’t even bother masking and taping off the tires!!
As a gas monkey back in the 60's we had a regular customer who owned a '48 Olds. Every 3 months my job was to drain the oil and pull the oil bath air filter and clean it. Easy but a messy affair.
Its too bad they did not have a PMCS checklist for the tractors like the military does for all of its vehicles.
Danny, should the center cup on the air cleaner be refilled with oil? Been so long since I’ve done this.
Yes
If the pipe is that dirty think of the dirt in the wire mesh in the body of it. Pull that body off and wash it out with diesel to get all the crud out of the wire mesh in there.
Pull that little metal line off engine and blow the brake clean and air through it all. Edit: See you took it off.
I would think that an engine overhaul would include cleaning that, but i guess that’s me.
Most older people just does what has to be done.
@@DeepSouthHomestead
Maybe, but not this older person.
@@denniscleveland669 Me either.
Four words... Baby Bottle washer brush.
Is that her canning garage or your tractor garage , Danny?
Both right now. 😆
That paint on the radiator will make engine run hotter they normal
Looks like your engine needs a Marvel Mystery Oil enema, then a decent synthetic oil - you'll get another 50 years out of it!
A 12GA. Barrel brush .
Take the other end off and put some compressed air in it. There ya go.
👍
Didn't soak the mesh in gasoline? Always use non detergent oil. Pcv not pvc.
OKAY !!! GOING TO GET MY 16'X 40' GROWERS SOLUTIONS GHSE. THIS SAT. .....😊👍🏻
SO EXCITED AND SCARED TO DEATH!!
Watched that video several times.. any advice if I do not have a tractor to raise myself up?
CAN THIS BE ERECTED BY ONE PERSON?
DO I NEED TO GRADE OR CAN I BUILD ON A SLIGHT ANGLE..??
SO MANY QUESTIONS???????????
You can drive them from a ladder. Put up batter boards first so you can get it level on a small slope.
👍💝
Maybe should have put some brake cleaner down that hose and let it sit and then blow it out
Just saying
That's what I did for an hour then started tapping it on the concrete.
Yeah, just as I suspected, the resto by the previous owner was no where near as thorough as he let on.
Most have the mentallity if it ain't broke Don't fix it.
Of course your face has to itch right at that moment.
Soak it in gasoline...
Danny you always talking about pesticides being sprayed you're doing that right and your property you don't know where that spray is going to in your garden where's it going to leech to you should know better than that..? Hurt very well Leach to your fish pond