This is my Federal Signal Valor amber lightbar with optional hot-foot take-down and alleys with full flood feature all controlled with a 6-button controller.
At least while I was going through the different patterns that are preset from Federal Signal, no, however...If you do make an order for this bar, you can definitely inquire to Federal Signal about such request and they will forward the info to their respective engineers to design and program your request for you.
+rjracing38 Did you have to do a special configuration with Federal Signal to get the two end pods in the rear to flash white with the optional white light mode? Or is that standard when you get dual color modules in the rear?
Was this something you did custom or do these come with an Amber option? Edit: I see on the site if you order it new you can select the colors you want. This here is a pricey bar then.
Yes, this was one I had setup for a client along with another color combination. So yes, they can be an expensive purchase but very amazing and fun to play with.
Federal Signal...haha. I have seen some pop up on eBay or even elightbars.org but of those that I have seen, few are amber. I have seen a lot more that are red and blue or straight blue.
Anthony Walters I'll double check my paperwork, I went through @sirennet for this order, I was able to get a much better deal than if I went directly to federal signal. I believe without the hot-foot on both takedowns and alleys, will save you a few hundred at least.
The CHP doesn't actually use the Fed Sig Valor. I believe they use Whelen's Police Legend LPX Discrete or the Whelen Liberty WeCan Please correct me if I'm wrong about the CHP's lights.
Depends on how the bar is setup. If you have the LEDs setup to do amber and red colors and the bar is programmed to set off the coloring, then you can display the red and amber but the bar must be setup for that. I have setup multiple multi-colored Valors in the past and got programming for such depending on what the individual was looking to do.
Depending on the setup you are looking for, you can see a rough cost idea on Federal Signal's website on their lightbar builder here; config.fedsig.com/lightbar/valor/. This will give you a rough idea of pricing but you will want to check in with a dealer to get accurate pricing and discounts.
@@jax6588 depending on the model, size and different options you get, they start around $3,600 give or take but pending where you buy, they may offer specials and discounts as well.
I wish I could find an amber one like this.
config.fedsig.com/lightbar/valor/
Good music to go with. Ty
Thank you for watching, greatly appreciate it :D
@@rjracing38
You're very welcome
Awesome and high quality video !!! 👍
Thank you, glad you have enjoyed this video, I do have more coming soon. Thanks for watching.
@@rjracing38 Really nice video. Do you have the Red/Blue LAPD version?
@@LukasHannover1988 yes, I was able to acquire a red and blue version
Seems like somewhat of an excessive lightbar for the purposes of an all amber configuration. But stunning nonetheless! Favorite pattern at 1:22!
Somewhat excessive, maybe but regardless, fun as ever and a great addition to my collection.
There's no pattern where it simply goes 100% amber>off>100% white>off?
At least while I was going through the different patterns that are preset from Federal Signal, no, however...If you do make an order for this bar, you can definitely inquire to Federal Signal about such request and they will forward the info to their respective engineers to design and program your request for you.
+rjracing38
Did you have to do a special configuration with Federal Signal to get the two end pods in the rear to flash white with the optional white light mode? Or is that standard when you get dual color modules in the rear?
What controller you using
At the time of filming this, I was using the 6-button controller but since has been upgraded to the Smart Siren Platinum series controller.
wackers unite!
Hahaha
Was this something you did custom or do these come with an Amber option?
Edit: I see on the site if you order it new you can select the colors you want. This here is a pricey bar then.
Yes, this was one I had setup for a client along with another color combination. So yes, they can be an expensive purchase but very amazing and fun to play with.
Top 👍
Can you do a green Valor next time??
I can definitely look into doing a green one. I was contemplating setting up an all blue one as well.
Where are I find one like that
Federal Signal...haha. I have seen some pop up on eBay or even elightbars.org but of those that I have seen, few are amber. I have seen a lot more that are red and blue or straight blue.
Cost without the hot feet.
Anthony Walters I'll double check my paperwork, I went through @sirennet for this order, I was able to get a much better deal than if I went directly to federal signal. I believe without the hot-foot on both takedowns and alleys, will save you a few hundred at least.
Wanna sale it?
Would you know if it would do chp or LAPD flash partners??
It can do those flash patterns with the patterns programmed from Federal Signal.
It did the LAPD one at 1:22
The CHP doesn't actually use the Fed Sig Valor. I believe they use Whelen's Police Legend LPX Discrete or the Whelen Liberty WeCan
Please correct me if I'm wrong about the CHP's lights.
I have the same valor on my work truck .how can i change from amber to red ?
Also i have the 6 button how i can cicle through all those modes
Depends on how the bar is setup. If you have the LEDs setup to do amber and red colors and the bar is programmed to set off the coloring, then you can display the red and amber but the bar must be setup for that. I have setup multiple multi-colored Valors in the past and got programming for such depending on what the individual was looking to do.
Excuse me good sir what wAs the cost of your light bar here?
This bar I was able to work with someone to acquire so I didn't have to pay too much except the freight to get it to me.
I am in love
I prefer rotating lighte
I do like them as well, I'm currently looking around for the SLR model.
Cost please for a Amber and Green
Depending on the setup you are looking for, you can see a rough cost idea on Federal Signal's website on their lightbar builder here; config.fedsig.com/lightbar/valor/. This will give you a rough idea of pricing but you will want to check in with a dealer to get accurate pricing and discounts.
How wide is that anyone know
This particular model was 44" wide. You also can get the 51" model for wider roof vehicles or if you wanted the larger model for display.
Ok great what’s the price on those looking at it for a security company start up
@@jax6588 depending on the model, size and different options you get, they start around $3,600 give or take but pending where you buy, they may offer specials and discounts as well.
rjracing38 Ok awesome thanks for the info they are sweet
Wanna sell?
This one I was able to setup for a client but can get another ordered. They are a little pricey but worth it.
@@rjracing38 what are they running
@rjracing38 I got one that's red white blue white I'm wanting to change to amber white and add the hotfoot to front and sides