For Everyone Who Watches This Video Supplies in total will cost somewhere around 150-80 bucks You can find a 10 pound box of polyfil at Walmart for $30 USD LED can be found on amazon there are expensive ones and cheap one buy within your budget just make sure the led density and brightness are what you want The poster boards are 38 Cents at Walmart Also No This Should Not Cause a fire in your house the only issuse with this type of LED Setup is that the LED don't get great airflow so they will burn out quicker then Normal
For a room size like this, get two 10 pound poly-fil, hot glue gun and 7 packs of 24 hot glue sticks, 20 poster boards and a staple gun and staples or you can get a 200 pack of tacs
Yeah I did both ways, but the better way is to put it on the poster boards and than stick the cloud to the poster board, and how you use hot glue is..... first get a hot glue gun and the hot glue sticks, plug in the glue gun and put the sticks in the back and than when you can’t press anymore, put another glue stick in the back
Yeah I could of put more cotton and I could gotten more leds too, I’m not sure if staples would work, I used glue and the other tutorials used glue or spray stuff so far, thanks so much for watching ❤️ 🔥 💯
I just finished my sons yesterday and let me tell y’all! Lol it’s some work. It looks so damn good tho I promise it’s worth it. Took about 5 or 6 hours
Yo! turned out great! I agree, the glue gun is a much better method. I used the adhesive spray and would only recommend if you want to go fast. But you do have to use a lot of sprays.
Better to use foam board or the transparent ridged board than paper. Also way smarter to buy queen sized $3 pillows from Walmart than polyfil. The pillows are stuffed with polyfil and the same size bag of polyfil you get in a $3 pillow costs $26.
I just started doing this and there are sum spots where there’s no leds so a few more leds in between would make it look better and I did mines with staples and it works fine just a heads up for anyone that wants to try it
I never had to do this but what I suggest, get good enough led’s, the brand Govee is really good. Also just think you probably could replace them, it would just be really really time consuming
@@DustinKlang It does look pretty fly. I considered it for a second to cover up the last 10 or so feet of my LEDs. But it gets hot as heck in my room, I can see my ceiling fan blowing them all over the place.
I like the username 👍🏻 polyfil is what the clouds are and superglue is what strongly holds the clouds to the the poster boards and the poster boards get tacked into the ceiling
For the big light in the middle did u out anything on it since lights are very hot ? Because I have special lights that are squares Can I not do it if I have then
how did you put the LEDs in different directions did you have to cut and put a connector. When I make a turn with the leds i twisted I purchased the same ones as you so did you cut to make them go slanted
How did you get it to light up without being constantly lit in all areas? If that makes sense? My govee lights are all constantly lit up and they do vary but always all at once and I'm looking for that partial lightening effect like in the first part of your video...
Go to your WiFi device, go to color and it will say segmented light, and then you can select the ones you want. To get the lighting effect go to the scene button right by the color button. Then you can pick many different modes
It’s better to keep them up because if you ever decided to take down the clouds, the clouds would be stuck to the ceiling and you would have to pick it off so that’s why you put them on the poster boards
@@DustinKlang Thanks bro my LEDs cames today and I'm going to go get poster board and poster board paper. Will poster board paper catch fire and can you do a follow up video about if any cotton fell etc
@@DustinKlang Thanks Keep up the great work I subbed and everything after watching the vid very interesting and entertaining I will stay tuned for more content
It doesn’t, I haven’t noticed it getting dirty ever from any other people who made videos, I had mine for 10 months now, so you are good! thanks for watching !
Yes because when you move houses or take the cloud ceiling down, glue and pilyfil won’t get on the ceiling, you wouldn’t want to glue the clouds to the raw ceiling, that’s why you glue it to the poster board and then tac it to the ceiling 💯
I'd take all that down.... It might puke cause everything seem's to be sick. There's also no link for ceiling cloud medicine. "You guy's did a good job" :P
Ima tell u real quick, u prolly know but i saw some comments saying spiders- dont be worried there prolly not gonna be any some guy also did a video on a cloud ceiling, 1 month later eveyrpne was sayin oh he gonna have so many spiders but nah he was fine. so u should be good too.
Sad part about this is if you are going to quote someone make sure that guy was doing it correctly no if you use 8 cans of spray glue for that little bit you are using to much. Clearly you can see that other guy didn't read the instructions . Cause if he did it would read put on a light layer let it tack up then attach what ever not spray on a lot and have to hold it there till it tacks up.lol. And a glue gun on poster board well it doesn't get sticky so it won't stay up after a month lol good luck . Looks funky have fun with it
You make it look easy 😁 my grandson asked me to do this for his movie themed bday party. Thanks for sharing.
Awesome yep!!!
“The clouds take the most amount of time because it’s really time consuming”
*Every 60 seconds in Africa, a minute passes*
😂😂😂😂😂😂
“Yuh, yuh, yuh, yuh, aye, aye, aye” lolllllll omgggg!!!!!!!!!!!!! I wheezed 😂
😂😂
😭🤣🤣
this really do be blowing up though- I’m proud of you bruv!
:)
FIRE: sick ✔
YELLOW: sick ✔
GREEN: sick ✔
TEAL: pretty cool ✔
PURPLE: insane ✔
AUDIO: PRETTY SICK ✔
Ayyye 🔥
THANKS SO MUCH FOR THE SUPPORT GUYS I LOVE YOU!!!!
For Everyone Who Watches This Video
Supplies in total will cost somewhere around 150-80 bucks
You can find a 10 pound box of polyfil at Walmart for $30 USD
LED can be found on amazon there are expensive ones and cheap one buy within your budget just make sure the led density and brightness are what you want
The poster boards are 38 Cents at Walmart
Also No This Should Not Cause a fire in your house the only issuse with this type of LED Setup is that the LED don't get great airflow so they will burn out quicker then Normal
Good comment, and it’s true
For a room size like this, get two 10 pound poly-fil, hot glue gun and 7 packs of 24 hot glue sticks, 20 poster boards and a staple gun and staples or you can get a 200 pack of tacs
12, 10 feet
How do u use the hot glue stuff cos u said u put it on the poster boards first but it looks like u used it on the clouds as u put the clouds down
Yeah I did both ways, but the better way is to put it on the poster boards and than stick the cloud to the poster board, and how you use hot glue is..... first get a hot glue gun and the hot glue sticks, plug in the glue gun and put the sticks in the back and than when you can’t press anymore, put another glue stick in the back
@@DustinKlang Ayr bro thanks
Yeah bro anytime ❤️ 💯
i think you should put more cotton on the leds then use staples to secure the clouds to your ceiling its a better alternative to glue
Yeah I could of put more cotton and I could gotten more leds too, I’m not sure if staples would work, I used glue and the other tutorials used glue or spray stuff so far, thanks so much for watching ❤️ 🔥 💯
To the people who have a smoke alarm in your room, dont cover it up
Yeah true
Why
You have to change the batteries for it and you wouldn’t be able to hear it that good
Yesssir I am first!!! And that is so sick!
I just finished my sons yesterday and let me tell y’all! Lol it’s some work. It looks so damn good tho I promise it’s worth it. Took about 5 or 6 hours
Hell yeah that’s the attitude I want to hear!!!
Yo! turned out great! I agree, the glue gun is a much better method. I used the adhesive spray and would only recommend if you want to go fast. But you do have to use a lot of sprays.
OMG I SAW YOUR TUTORIAL, YOURS IS LIT, LOVE YOU BRO!!!!
@@DustinKlang Thanks bro! Yours came out great as well. Glad you went with the glue gun method. Much more stable.
Thanks!!!!!! ❤️ 💯
You've done a bang up job buddies...Thank you...
Thank you!!!!
I would suggest use a acrylic sheet on top of the LED and put the cloud on top of it.It would look better
That works too!
@@DustinKlang no it doesn’t. Acrylic is expensive. It would have cost hundreds of dollars to get enough to have covered this.
Better to use foam board or the transparent ridged board than paper. Also way smarter to buy queen sized $3 pillows from Walmart than polyfil. The pillows are stuffed with polyfil and the same size bag of polyfil you get in a $3 pillow costs $26.
Nice I didn’t know that
Aren't poster boards cheaper?
I think so I would just do the normal way
@@DustinKlang is glue gun really better than adhesive?
Yes
Does the glue create a permanent smell in the room and also does dust form and build up on the clouds overtime?
No smell and there is no dust, my are still the same so it’s going good
You just got a new sub Dusty!
Thank you so much!!!!!!
doesn't it fall from the ceiling? because I have a polyester that is not completely in its entirety. How do I glue it?
It doesn’t fall from the ceiling, and put hot glue on the ceiling and than stick the cloud to ceiling, make sure you stick it up fast tho
For the audio like when you speak it moves do you need a Alexa for that.
No, it’s in the app
I just started doing this and there are sum spots where there’s no leds so a few more leds in between would make it look better and I did mines with staples and it works fine just a heads up for anyone that wants to try it
It's badass bro! The fire... totally doing that..🙋✨⚡💥💥👍👍
Ayyyyyye thanks bro and it would be sick 🔥 🔥 🔥😎
Wow you smashed it bro
AYYYYYE LIKE I SMASHED MY STEP SIS
😂
This looks so good ! Well done guys
THANKS so much, it means a lot!!!!!!
the purple one looks the best ngl
Purples lit too, thanks soo much for watching 🔥
@@DustinKlang np bro
Spider inside 🌚 bro is this heaven 😁
Hahahahhahahaha
I'm about to try this, but there's a variation between the led strips. Should I get the waterproof one or just the normal one?
Normal ones I think cuz you won’t need water proof ones
Imagine the spiders net. Now ur gonna know where all those spiders are coming from.
Spiders don't come unless it's wet.
could u send a link of the poster boards and the poly stuff ? i dont know where i can buy it
The lights are in the description and the polyfil and poster boards is at Walmart, target and craft stores.
bro this is fire🔥🔥🔥
Thanks bro 🔥 💯
No its a cloud
Im deff gunna do this.. n have my dbz characters look like they are clashing with the kamahamah wave lol
Ohh that’s coollll
It is incredible
Thank you!!
Imma try this
Good luck it’s time consuming, the end results is always the best
This looks sick definitely gonna be doing this and this vid helped out a lot
Omg thanks bro so much
This is sick! thanks for the video
Thank you so much!!! No problem!
This is slick.
Question though. If the LEDs needed replacing, do you have a simple solution or do you have to remove all the clouds?
I never had to do this but what I suggest, get good enough led’s, the brand Govee is really good. Also just think you probably could replace them, it would just be really really time consuming
This is a pretty dope fire hazard. Dude wasn't kidding 😆
It’s a pretty dope ceiling too
@@DustinKlang It does look pretty fly. I considered it for a second to cover up the last 10 or so feet of my LEDs. But it gets hot as heck in my room, I can see my ceiling fan blowing them all over the place.
Dang yeah if you want them you can’t have a ceiling fan, you would have to not turn it on or uninstall it
Which thing used for Clouds i mean how thy strongly attach with roof kindly reply
I like the username 👍🏻 polyfil is what the clouds are and superglue is what strongly holds the clouds to the the poster boards and the poster boards get tacked into the ceiling
AWESOME!!!
Thank you!!!
dude purple is cleannn 🔥🔥
Yeah fr 🔥
where did you got the poster boards?? and the "clouds"
The poster boards I got from Walmart and the clouds too
@@DustinKlang ty :)
Awesome job 👍🏾
Just imagine the led lights not turning on ☠️
Lolllllllll
😂😂😂😂 yeah happened to me
Haha 😂
🤣🤣🤣
Dang u prob don’t remember this but how much cotton did u have to use I got 5 for my room u think that would be enough🤔
5 boxes of how many pounds?
how much do you think you need of everything for 10 square meters? 😊
For the big light in the middle did u out anything on it since lights are very hot ? Because I have special lights that are squares Can I not do it if I have then
You can still do it because the Govee lights I got stay cool and you can just put the clouds around them
@@DustinKlang thank u so much
Yuhhh, thanks for watching ! ❤️
I could just imagine all the dust buildup on that lol
Lol or you can imagine how sick it would be
@@DustinKlang :o
😂
Dude that's fking sick seriously. Good way to start a year.
Thanks bro so much and that’s true, 2021 is going to be lit!!!
“the clouds take the most amount of time because it’s time consuming”…. yeah😀 fr?
😂
Why the poster board tho....doest it serve a purpose besides not tearing your ceiling up
The only purpose it has is the poster boards don’t rip your ceiling and if u don’t have any than hot glue on the ceiling will rip the paint off
Awesome 👏🏾
Overtime are they gonna catch dust or what will be the situation
I have mine for over a year now and there’s no dust, they look exactly the same
Totally worth getting
Yooo this looks sick, I wanna do this but not with LED strip light just with normal LED’s. Do you think this would still look good??
Yes definitely!!!!
If you try it what setting are you going to have it on
how did you put the LEDs in different directions did you have to cut and put a connector. When I make a turn with the leds i twisted I purchased the same ones as you so did you cut to make them go slanted
You juss bend them, that’s all I did, I didn’t even cut them
And when you bend it don’t try to force the corner where it bends, juss let the corner not stick
What materials did you use for that cloudlike thing?
Polyfil
Thank you so much for the comment, you might like my other videos if you want to check them out, subscribe if you want, it would be appreciated ❤️ ❤️
5:44 what if you place a speaker with Thunder sounds
Never tried but it would be pretty cool
So cool 😲
THANK YOU!!!!! ❤️ 🔥 💯
nicee
Thanks!!!!
THANK YOU! YOU HELPED ME SO MUCH
YAY!
Sweet
I wouls love to ask what wool do you recoment so it does not catch on fire. ? :)
It does not, I had it on for more than a day before and it doesn’t, it stays cool
Wow wow wow love it good
Thank you!!!! ❤️ 💯
Super nice bro I like it & I wanna try it on my room 😭🙈🔥.
Ayyyyye thanks bro, and it would be sick if you did
Best bro this is a 🔥 fire 🔥
Thanks bro it means a lot 🔥
Really bro it's an amazing ❤️❤️
❤️ ❤️ ❤️ ❤️ ❤️ 💯
How did you get it to light up without being constantly lit in all areas? If that makes sense? My govee lights are all constantly lit up and they do vary but always all at once and I'm looking for that partial lightening effect like in the first part of your video...
Go to your WiFi device, go to color and it will say segmented light, and then you can select the ones you want. To get the lighting effect go to the scene button right by the color button. Then you can pick many different modes
bro what did u do for that bc that look sick
Poster board on ceiling, leds on poster boards, poly-fil over leds and poster boards
I want to make this myself but what are those poster boards and what do they do?
It’s better to keep them up because if you ever decided to take down the clouds, the clouds would be stuck to the ceiling and you would have to pick it off so that’s why you put them on the poster boards
Ok wait how do you set your led lights to look like lighting. Might be a dumb question but still.
Nah you’re fine, the lighting mode is super fast it’s basically could give someone a seizure, the mode is just lighting
You set it from the app called govvee
It’s all fun and games until it gets moldy and dirty because of smoke, steam and bad ventilation
It’s still a live in the moment thing no one knows how long the clouds last
You used the led lamp very little, if you use it more, it will look better
Thank you for a great tutorial
Thank you!!!!
did you use poster board paper or poster board which ever one what size
We used Pen+Gear Light Weight White Poster Board, 22" x 28", you can find this at Walmart
@@DustinKlang Thanks bro my LEDs cames today and I'm going to go get poster board and poster board paper. Will poster board paper catch fire and can you do a follow up video about if any cotton fell etc
Yes most likely and I I never heard poster boards catch on fire, I’m not sure about the paper, it shouldn’t if the leds stay cool
@@DustinKlang Thanks Keep up the great work I subbed and everything after watching the vid very interesting and entertaining I will stay tuned for more content
Thanks bro, yeah I made this video to teach, this video will make it so people can see my other videos too, it’s cool, thanks for watching bro ❤️ 💯
You’re going to make my basement so lit 🔥 thanks dawg
Ayyyyye 🔥 yeah no problem 💯 💯
What do u do if the cotton gets dirty and black? Like you clean it?
It doesn’t, I haven’t noticed it getting dirty ever from any other people who made videos, I had mine for 10 months now, so you are good! thanks for watching !
@@DustinKlang hehe thanks for replying , your video helped a lot!
What did you use for the cloud parts? Like fluf or what it just looks so good want to do it just like the way you did it, what ya buy
The clouds is polyfil and than I left the leds in the comments, if yuh wanna check that out too
Thankyouu amin😭🥰🤲
Hey homie is that poster board necessary
Yes because when you move houses or take the cloud ceiling down, glue and pilyfil won’t get on the ceiling, you wouldn’t want to glue the clouds to the raw ceiling, that’s why you glue it to the poster board and then tac it to the ceiling 💯
Does the led lights come with a remote so you can change the color
There’s a app on your phone instead of a remote, the app is called Govvee
Pls what is the name of that stuff that works with the audio?
It’s just called music on the govvee app
Do you have to have the bulbs. Mine is around a ceiling fan with drop lights
No you don’t only if u want the extra stuff
Good video all around I’ll take notes!
Thank you so much! 🔥 💯
nice
Nicely done buddy. And very clear and informative video. what led strip did you buy to get the flame effect?
The brand is Govee, the link is in my bio!
bruh i got an add on this video that was like "what if your child was able to study for 2hrs in 1hr." Like wtf
😂😂😂😂
beautiful video
💯
Amazing
Thanks bro ❤️ 🔥
Imagine getting a heart from them ✨
Haha
@@DustinKlang omgg 🥺🥺🥺🥺❤️🔥thanksyou soo muchhh
Yuppppppp ❤️ 🔥
Your vedio was amazing …but no one allows me to get an led light …..😞so i watch these vedios
Awww, dang that sucks, just keep trying !
Can you use black poster board
Yes because it still holds up the clouds
Big bro ain’t got no glove on tho 🧐 big bros built differently
Lollll
What kind of Cotton do you use ? And do Groove Lights produce to much heat for Fire Hazard ?
They will not start a fire, and they don’t get hot. The cotton is poly-fil and you can get that at Walmart, target, or a craft store
@@DustinKlang how much did yhu need or use??
20 pounds of polyfil but each box is 10 pounds so I got two 10 pound boxes
Just breathing the whole day dust and micro cotton fiber. Darwin award
I'd take all that down.... It might puke cause everything seem's to be sick. There's also no link for ceiling cloud medicine. "You guy's did a good job" :P
Wait what 😂 ceiling cloud medicine!? Thanks!
How much was that in total? And what stripes did you use?
Around $100, and I used govve strips, there in the description
Ima tell u real quick, u prolly know but i saw some comments saying spiders-
dont be worried there prolly not gonna be any some guy also did a video on a cloud ceiling, 1 month later eveyrpne was sayin oh he gonna have so many spiders but nah he was fine. so u should be good too.
Yeah true, thanks bro, but I’m fine if there’s a spider Cuz I’ll chill with Spider-Man 😎
It was great thanks for making this video 😍
Thank you so much!!!!!!
That's raw af!!!🔥🔥🔥🔥
Ayyyye thanks bro!!!!! 🔥
Sad part about this is if you are going to quote someone make sure that guy was doing it correctly no if you use 8 cans of spray glue for that little bit you are using to much. Clearly you can see that other guy didn't read the instructions . Cause if he did it would read put on a light layer let it tack up then attach what ever not spray on a lot and have to hold it there till it tacks up.lol. And a glue gun on poster board well it doesn't get sticky so it won't stay up after a month lol good luck . Looks funky have fun with it
I made my in December and now it’s almost April, mine stayed up for 4 months so far
How much polyfil did u use ?
I bought a 10 pound box and used all of it. Then I bought another 10 pound box and used half of it.
Did you use 1 or 2 of the led lights?
I got 2 light bulbs, and I used one strip of leds for the clouds, it was 32 feet
How many bags of stuffing did you have to use
20 pound and I had some left over