The driveshafts from the associated b64 fit the 104001. Just figured I'd let everyone know they've got the option, cuz I'm running them in mine since I popped a shaft in a crash. Get the full front cva kit, and the lockable hex nuts too if you can.. they make tire changes even easier.
I have 2 of these...one is stock an one i put in a twin tazer 2s system... both work well... I also did grease up gear box an both front an rear diffs!
For like 1/3 of the price of course it isn't great in comparison. But for the money it's a really good option for either a spare car, to mess around or to get in to the hobby. I absolutely love mine and trying to get it to 90mph ATM.
Great channel. PS hope to see you at RC Madness sometime. One interesting point for both of these vehicles is that they are clones of the XRay XB4 2018 if you want really high quality parts for the WLToys
Very informative comparison. Don’t feel too bad about not uploading in a few weeks. Life happens, and it’s totally expectable from time to time.I too haven’t uploaded in almost 4 wks for the same reasons. Family,home, and work first, hobby and playtime take the back burner😜! You have a solid following, so no worries my friend! We’ll wait for those awesome videos!👊🏼👍🏻
The spur gear is sprung weight What is the difference between sprung and unsprung weight? In simple terms, a vehicle's sprung weight is supported by springs of one kind of or another (coiled springs, air springs, Belleville springs). ... So unsprung weight includes the wheels, tires, brake assemblies, differential, solid drive axles, hub motors, and anything directly connected to the wheels is unsprung mass.
Great comparison! It's not clear if the LC slipper actually fits with the driveshafts installed in the car. Can you confirm mechanically there are no issues? I've heard the cups on the slipper aren't long and large enough to accommodate the WLTOYS driveshaft ends. It would require completely upgrading to the LC drivetrain
It will fit. You MAY need to drill out the holes to move the mounts SLIGHTLY but that could just be my model. All of the bearing sizes are exactly the same throughout the vehicle. You can check the LC website for spur prices. I’m guessing the slipper and center diff models may be different prices
@@413RCI'm pretty sure the bearing spacing fits but I was referring to the drive cups and their ability to accept the WLtoys driveshafts. If you've tested it great, but just wanted confirmation, thanks
Hello I watched your video and it's cool, have a question now I put the lc racing slipper clutch into the wltoy but the rear shaft is to short and the same for the front. What size and what shafts should I get
I forgot about this comment, the arms is actually a direct fit. I have the xb4 and it was nice to know since it cost $11 for just ONE arm for the xray compared to just $7 for Two arms. Xray parts is no better than lcracing. Cool thing to note is that you can turn this into a mini truggy using xray xt4 arms. And drive shaft and longer linkage. You basically convert this car to xt4
wltoys is a copy of other manufacturers that been said it doesn't mean is bad , its actually the opposite of that , while other companies can and will charge you upwards of $600 hard earned macaroonies and even a thousand and more for other brands , it goes to show you sometimes that the quality isn't determined by the price, when it comes to china rc copys wltoys have perfected the art of making cheap rc that can and will hold up to even expensier counterparts.
so you think the center spur/slipper from lc will bolt right in the wltoys with no mods or is that a sure thing??? and how much does lc racing center diff/spur cost??? thanks for sharing
It will fit. You MAY need to drill out the holes to move the mounts SLIGHTLY but that could just be my model. All of the bearing sizes are exactly the same throughout the vehicle. You can check the LC website for spur prices. I’m guessing the slipper and center diff models may be different prices
Good idea and good video. I'm in hurry that you do à video of LC10B5. I'm just finished to build mine 😁. I saw you have a fan for the motor. Can you tell me what fan is it? Thanks Gabriel
So you are saying I can buy the LC Racing C7037 Slipper Set will fit for about 40€ and the drive shafts are also long enough? Why dont you just show it in the video? You cut right at the most interesting part :(
Excellent video, because after 3 years of 104001 and also 104002, it is difficult to get some parts. I think you were missing something that is important... The steering of the wltoys is very soft and it seems that the parts of the LC10B5 are identical.
I can definitely try this. I’m not sure using the stock WLtoys spur is the smartest for carpet. Will put a lot of strain on the motor. Maybe I’ll gear down
I hope! The pinion is bigger than most blx cars allow (29 vs 20) but the spur gear in this is also bigger (90something vs 57). We’ll see if it beats the Arrma top speed of 50mph
The driveshafts from the associated b64 fit the 104001. Just figured I'd let everyone know they've got the option, cuz I'm running them in mine since I popped a shaft in a crash. Get the full front cva kit, and the lockable hex nuts too if you can.. they make tire changes even easier.
You know if you can use the b64 center driveshafts on it too? Like if they will fit in the drive cups of the the 104001.
I have 2 of these...one is stock an one i put in a twin tazer 2s system... both work well...
I also did grease up gear box an both front an rear diffs!
Found this as I’m looking into the LC 10.. great video
@@midliferc1165 oh man! I can bring mine to RCM next week!
@ if you still have it I’d like to get a looksie
For like 1/3 of the price of course it isn't great in comparison. But for the money it's a really good option for either a spare car, to mess around or to get in to the hobby. I absolutely love mine and trying to get it to 90mph ATM.
I also agree with this. and very easy to upgrade to make it go slightly faster than stock
Great channel. PS hope to see you at RC Madness sometime. One interesting point for both of these vehicles is that they are clones of the XRay XB4 2018 if you want really high quality parts for the WLToys
Thank you! I’m at madness every Thursday night! I haven’t gotten into 1/10 scale yet really but good to know there’s even better hop ups!
Great video comparing the 2!
Good side by side comparison on both models Jeff, good info thanks for sharing... thumbs up brother 👍🍻
Very informative comparison. Don’t feel too bad about not uploading in a few weeks. Life happens, and it’s totally expectable from time to time.I too haven’t uploaded in almost 4 wks for the same reasons. Family,home, and work first, hobby and playtime take the back burner😜! You have a solid following, so no worries my friend! We’ll wait for those awesome videos!👊🏼👍🏻
Thanks for the video. Do you know if the CVDs and diff cups are compatible?
@@fre99999 they should be!
The spur gear is sprung weight
What is the difference between sprung and unsprung weight?
In simple terms, a vehicle's sprung weight is supported by springs of one kind of or another (coiled springs, air springs, Belleville springs). ... So unsprung weight includes the wheels, tires, brake assemblies, differential, solid drive axles, hub motors, and anything directly connected to the wheels is unsprung mass.
So wait...confirmed? The lc racing center fits?? Ordering one! Hell yes. Maybe I'll buy the sway bar kit too...
How did it turn out? Any modifications required or durability issues?
@@lazylizard6532 wondering the same
So were you able to fit the slipper spur into the wltoys? Thanks for sharing
Great comparison! It's not clear if the LC slipper actually fits with the driveshafts installed in the car. Can you confirm mechanically there are no issues? I've heard the cups on the slipper aren't long and large enough to accommodate the WLTOYS driveshaft ends. It would require completely upgrading to the LC drivetrain
It will fit. You MAY need to drill out the holes to move the mounts SLIGHTLY but that could just be my model. All of the bearing sizes are exactly the same throughout the vehicle. You can check the LC website for spur prices. I’m guessing the slipper and center diff models may be different prices
@@413RCI'm pretty sure the bearing spacing fits but I was referring to the drive cups and their ability to accept the WLtoys driveshafts. If you've tested it great, but just wanted confirmation, thanks
It dont work its to small
Good comparison but LC Racing 10B5 uses Graphite, not Carbon Fiber as you mentioned
Great video. Does WLToys 104001 front/rear diff can fit to LC Racing 10B5 ?
Nice. What is this proline body model? And you think I can use a center differential on the WLTOYS?
Yeah wondering the same, i5t looks like this one but not sure - 1/10 Axis Light Weight Clear Body: TLR 22X-4
Hello I watched your video and it's cool, have a question now I put the lc racing slipper clutch into the wltoy but the rear shaft is to short and the same for the front. What size and what shafts should I get
awesome video. do you know if the shocks from that car will fit the wltoys?? I'm looking to lower my ride height.. wltoys rides high
Yes definitely. And better quality
if you can find someone with an xray xb4. try to see if some of its parts fit. they are really close in terms of design
I’ll take a look!
I forgot about this comment, the arms is actually a direct fit. I have the xb4 and it was nice to know since it cost $11 for just ONE arm for the xray compared to just $7 for Two arms. Xray parts is no better than lcracing. Cool thing to note is that you can turn this into a mini truggy using xray xt4 arms. And drive shaft and longer linkage. You basically convert this car to xt4
@@413RCyou don't even need to buy the hinge pin. All the pins is a direct fit
wltoys is a copy of other manufacturers that been said it doesn't mean is bad , its actually the opposite of that , while other companies can and will charge you upwards of $600 hard earned macaroonies and even a thousand and more for other brands , it goes to show you sometimes that the quality isn't determined by the price, when it comes to china rc copys wltoys have perfected the art of making cheap rc that can and will hold up to even expensier counterparts.
Correct
Hey can somebody help me out i upgraded my wltoys, slipper clutch to the lc10b5 and it fit but the dogbone are not long. So what should I do now
I broke a center driveshaft that's connected to the front gearbox. What would you recommend to fix that issue?
Can you fit a standard size 2s lipo hardcase on the 104001?
so you think the center spur/slipper from lc will bolt right in the wltoys with no mods or is that a sure thing??? and how much does lc racing center diff/spur cost??? thanks for sharing
It will fit. You MAY need to drill out the holes to move the mounts SLIGHTLY but that could just be my model. All of the bearing sizes are exactly the same throughout the vehicle. You can check the LC website for spur prices. I’m guessing the slipper and center diff models may be different prices
@@413RC cool, thanks
@@413RC with the lc10b5 slipper in the 104001, are the stock center drive shafts long enough to reach the outdrives?
This does not work im literally trying this as i typed this and not the driveshafts are not long enough
Hello can the hole center drive shift fit the wltoys 104001
Good idea and good video. I'm in hurry that you do à video of LC10B5. I'm just finished to build mine 😁. I saw you have a fan for the motor. Can you tell me what fan is it?
Thanks
Gabriel
So you are saying I can buy the LC Racing C7037 Slipper Set will fit for about 40€ and the drive shafts are also long enough? Why dont you just show it in the video? You cut right at the most interesting part :(
I was wondering the same thing!
Because it dont work im looking at it irl as i type this
And what can the carosserie lc racing adapt to the 144001 WLtoys?
so what is the part number for the lc racing spur gear with the slipper
Excellent video, because after 3 years of 104001 and also 104002, it is difficult to get some parts.
I think you were missing something that is important...
The steering of the wltoys is very soft and it seems that the parts of the LC10B5 are identical.
@@LuisCerecedo-be7no great observation! Thanks for watching
How about the rear dogbones? Can the Wltoys use the LC10b5?
I would say yes!
우와~ 한글 자막 감사합니다. 😄👍
The WLtoys 104001 and 104002 are, except for maybe one or two parts, identical to the XRay XB4 RC Buggy. There is a video out on it.
Front axles, are they the same?
Different metal and design but interchangeable
@@413RC Thanks, that's good to know. Mine arrived today 👍💯😂. I was so happy. It took a little while.
Does the lc racing chassis bend like the wltoys
Absolutely not. The LC metal is much higher quality
So the WLToys is a copy of the LC Racing which is a copy of something else? So it’s a copy of a copy of a copy?
pretty much lol
Pretty cool.
And the 104001 now on carpet track, with the brushless combo is reliable?
I can definitely try this. I’m not sure using the stock WLtoys spur is the smartest for carpet. Will put a lot of strain on the motor. Maybe I’ll gear down
@@413RC A better receiver setup would probably do wonders aswell
@@TR.Pixels definitely. Just putting together a budget build with what I had laying around
Why not buy an LCracing car in the first place then?
Some might not have the ability to buy one for the price
104001 same just like X-ray 2020 version..not the LC racing I think
They’re all very similar
It's not lc racing, I believe wltoys 104001 have 80% more maybe very close copy to 2016 xray xb4 model...
Very similar
UA-cam keeps unsubscribing me from your channel
I've never heard of that happening before! For real?
Ewwww, I bet that's gina rip with the blx system in it!
I hope! The pinion is bigger than most blx cars allow (29 vs 20) but the spur gear in this is also bigger (90something vs 57). We’ll see if it beats the Arrma top speed of 50mph
@@413RC the gears are 48pitch? Wonder what it would take to change them to 32p? Then ya might be able to hit that 50+🤔
@@joshjohnson9167 gears are .6 mod on the WLtoys
What was in the road...lol
I hit a damn electrical box on the sidewalk lol
@@413RC 🤣Jesus, no wonder!😆🤟