i bought this one a year ago, we are living in a 38 ft camper till our house is finished being built. family of 7 . literally do 3-4 loads a day and this little machine is a workhorse!!!! love it
@@Mubarakaahshakirah does not tumble dry but does spin pretty well and there is a spin only cycle (#7) that will spin 5 more minutes as needed. I have a clothesline indoors with a fan on it and my stuff is drying pretty rapidly.
Thank you for this! I’m wanting to purchase one and was trying to look for a review on how it’s working. I appreciate you doing this! Me and my family need one for our place 🙏🏼🙌🏼
I just got this machine and I have some info to share but I can't comment on the durability of things yet. Have done a grand total of three loads. 1 you probably have what you need to get started when you get. You need to remove the aerator on your faucet but the adapter is included. You may not need to add any washers. I got three extra in addition to the ones that were inside the nozzles. If you try to add more they won't screw together because the two threaded sides won't meet. Similarly I didn't find the need for plumbers tape. 1b. Once you run water to the machine the connection will be full of water and under pressure, waiting to be needed again. When you disconnect the machine from the tap (leave the connector on the faucet) it will spray water everywhere. Just cover it with a rag as you disconnect it. No big once you know. 2 I bought a 20x20in wheeled plant stand from Walmart. It was $25. It works perfectly. It gets the machine off the floor in case there is a mess the washer won't be standing in it. It also raises the nozzles and cords etc a couple inches closer to the faucet if you need a reach. And finally the machine itself is not on wheels so the platform allows it to be moved around. Make sure you push slowly and carefully esp over transitional floors such as carpet to tile etc. and push slightly downward so you don't just slide the machine off its platform. The wheels on my particular cart each have locks so you can lock for stability and unlock to move. 3 the loads are pretty small. If you overfill it's probably going to exert more on the machine. And it won't wash or rinse as well. This might be the most frustrating part. But the loads run fast on cycle 3 so you can push through quickly. 4 The drain hose is iffy and had me kind of worried. Will the water traveling through it dislodge it and misdirect the water? Maybe. I ended up buddying it to the hose that's connected to the sink using a ponytail elastic ubber band. That way they will be connected firmly to the faucet of the sink. Stagger the ends of them so the drain hose is set about 8 or 10 inches back from the other and it should aim the drain water right to the back of your sink. (Fiddle as needed.) 5 the drain hose will empty out completely if you lay it on the floor particularly if you have it on the platform. If you lay a towel down you will mitigate problems. Then hang it to dry. If you do a few loads in sequence empty the hose after the last. 6 you probably want to stand there while it runs a few times to troubleshoot potential issues. You don't want an unattended snafu. After that do you. I wouldn't leave it while I'm not home. 7 you need to remember that your tap is occupied while the machine is in use. No doing dishes. No filling a pasta pot. No making a drink or filling ice trays. Of course. But I didn't think of it until I had to wait. So...Plan your use of that faucet. Enjoy...I'm loving the convenience of this machine!
Also regarding the drain hose. It is threaded to a saddle thats supposed to allow for stabilizing the hose onto the sink or the hump between the basins. If it seems unsteady check that you aren't setting it up with the hose twisted. You can inchworm the hose out of the saddle and put it in the other way which may help with how naturally the hose sits in the basin. Helps whether or not you splint the two hoses together.
I’m not sure exactly what standard would be, but I can say the hose I bought from Home Depot to fit it looks just like the metal looking hose that’s used on the back of the toilet. Hope that helps.
Hi thank you for your review. As you mentioned, there’s not many reviews online for this product, so thanks again. How loud is it and have you had any issues with lint clogging? Or does the lint trap work well? Also, how dry do the clothes come out?
Your welcome, it is not loud at all and does not shake all around during the spin cycle it’s stable. No issues with clogging, I’ve washed towels, sweaters, sheets and throw blankets. The lint trap when I pull it out hardly ever has anything in it, but I did notice the part that’s actually part of the washer has lint in it. The clothes come out dry like a regular washer. I’m satisfied so far as long as I get some years out of it. Thank you much🙂
I have a question, instead of hooking the hose to the sink, can i hook it into the actual washer outlet. I have a washer hook up just cant get a full size washer. Was wondering if i can hook this to the washer machine hook up
Peace! Thank you for sharing, im about to buy this portable washing machine and wanted to watch a few reviews on it. Question does it a spin dryer as well? 😊
It connects good to my kitchen sink, it fit my bathroom but it would come off some time when the water was too high maybe the bathroom sinks can’t take the pressure but not sure.
First the hose that came with it, then I took it to Home Depot to make sure the connection part was the right size because I wanted a longer hose. I’m not sure what type of problem your having but for me when I screw the hose on sometimes the threading doesn’t line up properly and it leaks so I have to re do it.
I pray too thank you for your video mine apartment size washer filled up with water and wouldn't go anymore so I need to find one asp appreciate you taking the time I hope you get a lot of likes and people subscribe so you can make some Christmas money from the video!
Great review! I just got mine and am trying to wash my first load but the timer stops counting down at 21 n wont start washing... have you had this issue? I think mine may have been refurbished idk if the colorful cords at the bottom are supposed to stay disconnected. Kinda confused 😅
I didn’t measure the borax I just sprinkled it around, you don’t use as much as you would with laundry soap so I would say snout half a cup, it’s up to you.
Save your back and make moving easier with this telescopic furniture dolly. Easily adjust the sturdy stainless steel bars to fit larger furniture. The rubber sw… Source: The Home Depot
I just bought this, there’s soapfoam coming out the top? I this normal ? After it rinses and it gets more water. It also drips water from the bottom when it’s spinning
I'm sure you've figured out something by now, but for others....depending on how it's leaking, alot of times, Plummers Tape will do the trick. If you don't know what that is, it's a thin, non-sticky tape like roll that wraps around the threading of the hose connectors. Usually, it's a white and blue tape roll sized roll. Can be found at Lowe's, Home Depot, Ace Hardware....I think even Walmart has it.
This thing is is truly a mini washing machine, it rinses well, connects to faucet, water runs into the tub and drains it’s not like the twin tub where you do it all, the connector has some type of valve in it that regulates the water running and stopping. Also has a pump so you don’t have to have the drain hose lower than the machine.
@@aspiritofperserverance3900 So I hooked mine up and plugged it up and it shocked me when I touched the back to move it. I think I might have did something wrong. I did plug it up to an extension cord.
Should be a warranty, even it the amount of days to return is up, I would still email the company. Don’t just try the place you got it from contact the company also.
I got this a while ago but it stopped draining. I took off the pump and checked to see if anything was stuck in it but nothing was there. If i do a spin only cycle it wont spin and the water doesn't even start flowing down the tube to the pump. I imagine i haven't been maintaining it very well as when this happened it was the first time i saw and cleaned the filter. Any advice is appreciated.
that was my exact same problem once but what happened was that I actually left the hose off I believe the pump got wet and I took it out bought a whole new pump which I think was too strong for the machine and after about a week I put the old pump back in. after I put it back in the machine it started working again and I think it got wet and it just needed to dry out so check to make sure that your pump works while it’s out of the machine plug it up to a power source,I believe I used a 9 V battery it didn’t completely spin, but it kind of turned a couple clicks, and that meant it worked.
Just make sure that your pump works because it sounds like The pump is not draining and they do have those pumps on Amazon but make sure it’s the correct power source so it’s not too much power for the machine.
@aSpiritOfPerserverance I unscrewed the pump and ran spin only, and the thing inside was spinning. Could the pump just not be strong enough? It also makes a loud thudding sound
I don’t know for sure but the replacement pump that I bought for mine made a loud sound and I figured the pump was too strong for it thats when I put the pump back in that came with the machine and it started working again and never made that noise again.
I’m sure you could use bleach or vinegar, I use bleach in mine and others use vinegar. Mine has a tub was cycle which I’ve never used but if I was you I would wipe it down first and then run the tub clean cycle. I would also test out your first cycle on a towel or piece of clothing you don’t care about.
I have this one as well unfortunately mine stopped pumping water outs I don’t know what I need to do to fix. Let us know if you encounter this problem.
@@aspiritofperserverance3900 less than a year. so the water hose is very thing the one that it comes with that it kept getting holes. so i did replace the hoes with a dish washer hoes which it is much sturdy and its been working. i put in a blanket to wash it was not a heavy or big blanket but it seemed that it couldnt take it so i rinsed right away and took it out and it seems like it stopped rotating back in forth strong enough so i have to check that out now and see if i can fix it. when it works i love it saves me so much money.
Ok, I did encounter it not draining. I actually forgot to tape the hose down to my counter and it got the pump wet, I bought a new pump which was too strong for the machine, so I put the old one back in and it works fine. I think the old pump had gotten wet and I just needed to let it dry out.
My washer was working fine but now it cuts off from the power source for some reason everytime only when its time to spin it shuts down cause it shuts the outlet off all of a sudden
I have a Nictemaw brand. It's an exact replica of that machine. Can you please tell me if your Washplate/agitator has an 11" circumference. The reason I ask, is I typed in the model number and all the replacement Washplates are 16" or higher, but none as small as 11 inches wide. Your wash plate has the exact same design and guess what? It's impossible to find no matter how many key words I type on the net. I found your channel during my search and noticed the exact machine with the same type of Washplate. Even when you do image searches, the patterns in the Washplate appear to come in every variety except for the one yours and mine have. Beware that the screw in the center that connects the Washplate for agitator can crack inside the center where the screw holds it together and the Washplate will no longer rotate back and forth with agitator moving. Instead the base screw agitates by itself because it can no longer grip the screw with tension, so it rotates with no contact to the Washplate which moves the clothes. Hence no motion in the water, but the machine still makes a sound like it's washing, but the water stands still. My friend ordered some apoxy and maybe we will try to cement the Washplate where the crack is and see if that will provide enough stability and strength to wash a load without cracking due to tension. It's powerful and washes nicely, when it works, but when the plate cracks where the screw is the party is over!! I may have to buy a name I recognize next time because other portable washers seem to have replacement parts that are more universal. I see a lot of whirlpools that have universal replacements available etc,. I never heard of Nictemaw or the brand you have, but it's the same machine. This plate seems to be a mystery. I can't find it. If anyone else has I would appreciate any leads to ensure an exact fit. These washers seem to have a much smaller plate than most available. Very strange. Also, is it possible for you to share the model number on the back of your unit. I am curious to see if the numbers are the same. They are identical with different brand names. But visually they are the exact same design.
Yes I will measure it and get back to you today, I saw the one you have and was trying to choose between which to buy. How long did you have it before it messed up?
@@aspiritofperserverance3900 The machine I have was purchased Sept. 21, 2022. Washplate broke Jan 06, 2023. It lasted 4 months. I was really enjoying it too. I am trying hard to see if there is a match somewhere online to purchase a replacement Washplate. Still no luck yet. If you or anyone can find this 11 in. Washplate that looks exactly like the one at the bottom of your washer. I would greatly appreciate it! We will see how the Apoxy seal experiment goes in the meantime when that arrives. In the worst case I will search for a similar washer with a better known name brand and search to see how many replacement parts are searchable online. I hope I can modify and fix this one successfully.
@@aspiritofperserverance3900 Okay. I am still searching and this is a challenge. After doing more research this a common problem with this type of top loading washer with Washplates. The part in the center that supports the screw is called a Spline if I am correct. It tends to crack inside the hole in the center. It's best to keep a few spares. The smallest I have found is 10 and 13 inches, 16 in. also, no luck with 11. If I find anything too I will update here. Otherwise, I recommend people buy a familiar name brand instead and verify how many universal replacement options are available for critical parts. Always buy a few Washplates for back up. I do have three spare hose connectors as those can be a problem. So far no leaks after I got a well made attachment on the water connection parts. Thanks again!
Your welcome, yes please do come back and update that would be very resourceful because I didn’t even think about how hard it may be to find parts for these off brands. Thank you 🙂
Yes I'm sorry I do plan to do another video since I figured out how to pause the video and start back. Thank you will do soon, but am still satisfied with it.
My connector came with it. If you go to Home Depot they will help you find the right connectors. Take what you can with you like the hose your using and what you can’t take with you take pictures and they can help you.
Once you plug the hose to the faucet (using the supplied connectors) you turn the water on and that’s it. There’s like a valve shut off or something in the connectors it comes with that controls the water flow.
I’m not saying this is the exact one but it looks like this one it is this type of metal hose. I actually took the hose that came with the Machine into Home Depot to make sure each end was the same connection.
I'm sure you've figured out something by now, but for others....depending on how it's leaking, alot of times, Plummers Tape will do the trick. If you don't know what that is, it's a thin, non-sticky tape like roll that wraps around the threading of the hose connectors. Usually, it's a white and blue tape roll sized roll. Can be found at Lowe's, Home Depot, Ace Hardware....I think even Walmart has it.
Yes quick wash is pretty much all that I use for all my clothes. I use the standard wash for my towels. Those are the only 2 settings I’ve used plus the spin cycle. I guess I should try all the cycles so I know how they work.
@@aspiritofperserverance3900 ok thank you it’s good to know I just received mine and was planning on testing out later today but don’t wanna mess it up lol how’s it holding up so far ?
OK I looked it up and my troubleshooting says the E3 is top cover fault that means the cover is open during use so close your cover or make sure it’s completely shut down maybe the lever that the sensor or something then it’s not closed I’m not sure, but it says E3 is a top cover fault
I don’t know for sure, I know I had 4 months to return to Walmart but it never hurts to try and return or get your money back after the time is up. I still have no problem with it.
I usually do level 8 because I mostly wash full loads and sometimes I do level 1 for small loads like dish towels and it doesn’t always stop at the level 1. , it’ll fill all the way to an 8. I’ve used heavy duty a couple times and never had a problem with it stopping.
I don’t know what type of leak you are talking about but I use to connect my washer to my bathroom room faucet but it leaked and would even pop of so I started using my kitchen sink. I think it leaked in the bathroom because off the threading on the faucet.
I'm sure you've figured out something by now, but for others....depending on how it's leaking, alot of times, Plummers Tape will do the trick. If you don't know what that is, it's a thin, non-sticky tape like roll that wraps around the threading of the hose connectors. Usually, it's a white and blue tape roll sized roll. Can be found at Lowe's, Home Depot, Ace Hardware....I think even Walmart has it.
![👉 Best Portable Washing Machines of 2023 - TOP 4 Picks [Best Review]](http://i.ytimg.com/vi/0znFbyYJWx4/mqdefault.jpg)
This video is good. Can you do an update of this machine?
Yes I will I’ll do it this upcoming weekend, is there anything specific you want be to do?
Have you done the update video yet?
Yes I apologize, I did the videos and had not posted because I wasn’t sure if I was satisfied with it, lol . I just posted it.
Where the new video
@aspiritofperserverance3900
i bought this one a year ago, we are living in a 38 ft camper till our house is finished being built. family of 7 . literally do 3-4 loads a day and this little machine is a workhorse!!!! love it
Yes, I love it too. It’s so convenient and handles a good size load!
Thank you for this!!! My washer just broke and with 4 kids I need an affordable solution asap. Your comment sold me on buying it
Does it dry?
@@Mubarakaahshakirah does not tumble dry but does spin pretty well and there is a spin only cycle (#7) that will spin 5 more minutes as needed. I have a clothesline indoors with a fan on it and my stuff is drying pretty rapidly.
Does it dry as well?
Just bought this little workforce washing machine thanks for the video it taught me how to use it
Thank you for this! I’m wanting to purchase one and was trying to look for a review on how it’s working. I appreciate you doing this! Me and my family need one for our place 🙏🏼🙌🏼
Welcome , it’s still going good too.
Mine just came today… thanks for helping me learn how to use the dang thing😊
Lol your welcome
I just got this machine and I have some info to share but I can't comment on the durability of things yet. Have done a grand total of three loads.
1 you probably have what you need to get started when you get. You need to remove the aerator on your faucet but the adapter is included. You may not need to add any washers. I got three extra in addition to the ones that were inside the nozzles. If you try to add more they won't screw together because the two threaded sides won't meet. Similarly I didn't find the need for plumbers tape.
1b. Once you run water to the machine the connection will be full of water and under pressure, waiting to be needed again. When you disconnect the machine from the tap (leave the connector on the faucet) it will spray water everywhere. Just cover it with a rag as you disconnect it. No big once you know.
2 I bought a 20x20in wheeled plant stand from Walmart. It was $25. It works perfectly. It gets the machine off the floor in case there is a mess the washer won't be standing in it. It also raises the nozzles and cords etc a couple inches closer to the faucet if you need a reach. And finally the machine itself is not on wheels so the platform allows it to be moved around. Make sure you push slowly and carefully esp over transitional floors such as carpet to tile etc. and push slightly downward so you don't just slide the machine off its platform. The wheels on my particular cart each have locks so you can lock for stability and unlock to move.
3 the loads are pretty small. If you overfill it's probably going to exert more on the machine. And it won't wash or rinse as well. This might be the most frustrating part. But the loads run fast on cycle 3 so you can push through quickly.
4 The drain hose is iffy and had me kind of worried. Will the water traveling through it dislodge it and misdirect the water? Maybe. I ended up buddying it to the hose that's connected to the sink using a ponytail elastic
ubber band. That way they will be connected firmly to the faucet of the sink. Stagger the ends of them so the drain hose is set about 8 or 10 inches back from the other and it should aim the drain water right to the back of your sink. (Fiddle as needed.)
5 the drain hose will empty out completely if you lay it on the floor particularly if you have it on the platform. If you lay a towel down you will mitigate problems. Then hang it to dry. If you do a few loads in sequence empty the hose after the last.
6 you probably want to stand there while it runs a few times to troubleshoot potential issues. You don't want an unattended snafu. After that do you. I wouldn't leave it while I'm not home.
7 you need to remember that your tap is occupied while the machine is in use. No doing dishes. No filling a pasta pot. No making a drink or filling ice trays. Of course. But I didn't think of it until I had to wait. So...Plan your use of that faucet.
Enjoy...I'm loving the convenience of this machine!
Also regarding the drain hose. It is threaded to a saddle thats supposed to allow for stabilizing the hose onto the sink or the hump between the basins. If it seems unsteady check that you aren't setting it up with the hose twisted. You can inchworm the hose out of the saddle and put it in the other way which may help with how naturally the hose sits in the basin. Helps whether or not you splint the two hoses together.
Thank you sounds like you’ve had this machine the same amount of time as me if not longer! I can relate to everything you said😄Thank you
I need to know how to rinse does it does it on his own or ypu have to do after wash put in rinse then in spin
It rinses on its own.
Thanks for sharing. I plan on purchasing one.
Yes ma'am your welcome!
Does this have standard hose connections?
I’m not sure exactly what standard would be, but I can say the hose I bought from Home Depot to fit it looks just like the metal looking hose that’s used on the back of the toilet. Hope that helps.
I was wondering does it do comforters blankets? I am wondering
No, I tried a twin size comforter and it didn’t go well🤦🏽♀️. Sheets are okay and throw blankets
@@aspiritofperserverance3900 I just ordered one but it’s the 25 pound washer instead of the 17.7 I’m wondering will it be able to wash a comforter?
Hi thank you for your review. As you mentioned, there’s not many reviews online for this product, so thanks again. How loud is it and have you had any issues with lint clogging? Or does the lint trap work well? Also, how dry do the clothes come out?
Your welcome, it is not loud at all and does not shake all around during the spin cycle it’s stable. No issues with clogging, I’ve washed towels, sweaters, sheets and throw blankets. The lint trap when I pull it out hardly ever has anything in it, but I did notice the part that’s actually part of the washer has lint in it. The clothes come out dry like a regular washer. I’m satisfied so far as long as I get some years out of it. Thank you much🙂
Just got the washer today and haven't used it yet.
Hi I got this and it said to remove the black basket at the bottom which is screwed on. Did u remove it
I’m not sure, I don’t remember that. Sorry.
Did you ever remove that piece? I just got one and it says the same thing but the picture doesn't match the piece that's screwed on
I have a question, instead of hooking the hose to the sink, can i hook it into the actual washer outlet. I have a washer hook up just cant get a full size washer. Was wondering if i can hook this to the washer machine hook up
I’m pretty sure you can. I don’t know if the one that comes with it will connect but Home Depot or Lowe’s would definitely have a connector for it.
What kind of parts that comes with this washing machine
It comes with the hose and the connector for the faucet.
Peace!
Thank you for sharing, im about to buy this portable washing machine and wanted to watch a few reviews on it. Question does it a spin dryer as well?
😊
Yes it spin dries, just like a regular washing machine, I love it soooo handy!
Thank you so much for this 😊 great video. Hope there's a follow up after youve had it for awhile.
Yes I plan to do a 3 or 6 month one.
Thanks for the review. Does the part that you connect to the sink work on most sinks?
It connects good to my kitchen sink, it fit my bathroom but it would come off some time when the water was too high maybe the bathroom sinks can’t take the pressure but not sure.
I’m having trouble connecting the water pipe hose to the machine what did you use and connect?
First the hose that came with it, then I took it to Home Depot to make sure the connection part was the right size because I wanted a longer hose. I’m not sure what type of problem your having but for me when I screw the hose on sometimes the threading doesn’t line up properly and it leaks so I have to re do it.
I pray too thank you for your video mine apartment size washer filled up with water and wouldn't go anymore so I need to find one asp appreciate you taking the time I hope you get a lot of likes and people subscribe so you can make some Christmas money from the video!
Very nice!❤
😊 Thank you
How many bath towels can you fit in? Also, what size comforter? Pls
4 regular bath towels, 3 if it’s those larger, thicker ones. I actually washed a twin comforter once but not again I think it was too big.
Great review! I just got mine and am trying to wash my first load but the timer stops counting down at 21 n wont start washing... have you had this issue? I think mine may have been refurbished idk if the colorful cords at the bottom are supposed to stay disconnected. Kinda confused 😅
Oh no! No I have not had that problem but loose wires doesn’t sound good to me. I would return it!
@@aspiritofperserverance3900 ok I got it to spin.. do you turn the faucet off when it starts to wash? Thank you for your help
@@aspiritofperserverance3900 I think the faucet valve isn't on right lol 😂 I'm slowly making progress.
No you leave the faucet on, it’s just like a regular washer I guess there’s some kind of valve in the hose connector part that regulates that.
Lol
About how much borax did you use? Because I have some.
I didn’t measure the borax I just sprinkled it around, you don’t use as much as you would with laundry soap so I would say snout half a cup, it’s up to you.
I am very grateful for your video. thank you so much . God bless you .
What size do u have
The 17.5lb tub.
Did you have to turn the water faucet on to get it to start filling or did it auto fill since its connected to everything?
Yes you turn the faucet on once after that it fills itself.
@@aspiritofperserverance3900 did you leave the faucet on the whole cycle?
What stand did you get?
Save your back and make moving easier with this telescopic furniture dolly. Easily adjust the sturdy stainless steel bars to fit larger furniture. The rubber sw…
Source: The Home Depot
I got mine from Walmart, but it looks like the same one and for cheaper than what I bought it mine for this one says $15
Thank you! Great video.
Very little info on this product, glad i found this video.
How can we link this to Amazon reviews?
Thank you.I’am not sure on how it can be linked to Amazon.
I just bought this, there’s soapfoam coming out the top? I this normal ? After it rinses and it gets more water. It also drips water from the bottom when it’s spinning
No I have only had that happen when I put too much soap, could that be what happened?
I have a waterleak by the water intake. Wht do i do or what did i forget.
For me it would only leak if I didn’t have the hose screwed on correctly, sometimes I have to unscrew and screw back on slowly.
I'm sure you've figured out something by now, but for others....depending on how it's leaking, alot of times, Plummers Tape will do the trick.
If you don't know what that is, it's a thin, non-sticky tape like roll that wraps around the threading of the hose connectors. Usually, it's a white and blue tape roll sized roll. Can be found at Lowe's, Home Depot, Ace Hardware....I think even Walmart has it.
All I want to know about is the rinse, because the other big plastic ones w/ a spinner to dry on the side SUCK
This thing is is truly a mini washing machine, it rinses well, connects to faucet, water runs into the tub and drains it’s not like the twin tub where you do it all, the connector has some type of valve in it that regulates the water running and stopping. Also has a pump so you don’t have to have the drain hose lower than the machine.
@@aspiritofperserverance3900 alright. Thanks you a lot. I'm about to screen shot your help. I wonder if there's bigger models fory blizzard coveralls.
@@bigrob4840 Your Welcome
Thanks I will buy it tomorrow. God bless❤
Is there suppose to be an electric current in the back of the unit?
I’m not sure what you mean by that?
@@aspiritofperserverance3900 So I hooked mine up and plugged it up and it shocked me when I touched the back to move it. I think I might have did something wrong. I did plug it up to an extension cord.
My washing not working had it since February just used it for the third time only thing working in spin turbo dry cleaning in in turbo spin
Should be a warranty, even it the amount of days to return is up, I would still email the company. Don’t just try the place you got it from contact the company also.
Did you find a solution to your problem? If so, how did he do it? I have the same problem
Did you find a solution to your problem? If so, how did he do it? I have the same problem
Do you still like it. I'm thinking if getting one.
Yes I do still like it.
I'm leaving a comment because I watched this one first but needed to go see the second video and forgot to comment.lol awesome review!
Thanks you🙂
Thank you for the review .
Welcome
Thanks for this my daughter need one so bad
Welcome
Can I use hot water in this wash machine?
I do. I don’t remember reading anything saying you can’t.
@@aspiritofperserverance3900
Thank you
🎉🎉Gracias Exelente por su ayuda
Your Welcome
After the wash cycle is done and it spins does it spray water over the clothes as it's spinning to rinse them off?
I know for sure it doesn’t in the quick wash cycle but I don’t know if any other cycle is different, but as far as I know it does not.
I got this a while ago but it stopped draining. I took off the pump and checked to see if anything was stuck in it but nothing was there. If i do a spin only cycle it wont spin and the water doesn't even start flowing down the tube to the pump. I imagine i haven't been maintaining it very well as when this happened it was the first time i saw and cleaned the filter. Any advice is appreciated.
that was my exact same problem once but what happened was that I actually left the hose off I believe the pump got wet and I took it out bought a whole new pump which I think was too strong for the machine and after about a week I put the old pump back in. after I put it back in the machine it started working again and I think it got wet and it just needed to dry out so check to make sure that your pump works while it’s out of the machine plug it up to a power source,I believe I used a 9 V battery it didn’t completely spin, but it kind of turned a couple clicks, and that meant it worked.
Just make sure that your pump works because it sounds like The pump is not draining and they do have those pumps on Amazon but make sure it’s the correct power source so it’s not too much power for the machine.
@aSpiritOfPerserverance I unscrewed the pump and ran spin only, and the thing inside was spinning. Could the pump just not be strong enough? It also makes a loud thudding sound
I don’t know for sure but the replacement pump that I bought for mine made a loud sound and I figured the pump was too strong for it thats when I put the pump back in that came with the machine and it started working again and never made that noise again.
My machine arrived a little dirty with some stains in it. How do I go about cleaning this? Is it safe to use vinegar or bleach?
I’m sure you could use bleach or vinegar, I use bleach in mine and others use vinegar. Mine has a tub was cycle which I’ve never used but if I was you I would wipe it down first and then run the tub clean cycle. I would also test out your first cycle on a towel or piece of clothing you don’t care about.
Do I HAVE to have the hose connected to the sink or can I just throw buckets of water into it ?
I’m not sue, it won’t hurt to try it, it probably has a sensor for the water level or weight so it might work
Did you ever find a washer that doesn’t require a hose connection? Buckets only, I’ve been looking for one as well
I have this one as well unfortunately mine stopped pumping water outs I don’t know what I need to do to fix. Let us know if you encounter this problem.
Oh wow really? How long have you had it?
@@aspiritofperserverance3900 less than a year. so the water hose is very thing the one that it comes with that it kept getting holes. so i did replace the hoes with a dish washer hoes which it is much sturdy and its been working. i put in a blanket to wash it was not a heavy or big blanket but it seemed that it couldnt take it so i rinsed right away and took it out and it seems like it stopped rotating back in forth strong enough so i have to check that out now and see if i can fix it. when it works i love it saves me so much money.
Ok, I did encounter it not draining. I actually forgot to tape the hose down to my counter and it got the pump wet, I bought a new pump which was too strong for the machine, so I put the old one back in and it works fine. I think the old pump had gotten wet and I just needed to let it dry out.
My washer was working fine but now it cuts off from the power source for some reason everytime only when its time to spin it shuts down cause it shuts the outlet off all of a sudden
I’ve never had that problem.
I have a Nictemaw brand. It's an exact replica of that machine. Can you please tell me if your Washplate/agitator has an 11" circumference. The reason I ask, is I typed in the model number and all the replacement Washplates are 16" or higher, but none as small as 11 inches wide. Your wash plate has the exact same design and guess what? It's impossible to find no matter how many key words I type on the net. I found your channel during my search and noticed the exact machine with the same type of Washplate. Even when you do image searches, the patterns in the Washplate appear to come in every variety except for the one yours and mine have. Beware that the screw in the center that connects the Washplate for agitator can crack inside the center where the screw holds it together and the Washplate will no longer rotate back and forth with agitator moving. Instead the base screw agitates by itself because it can no longer grip the screw with tension, so it rotates with no contact to the Washplate which moves the clothes. Hence no motion in the water, but the machine still makes a sound like it's washing, but the water stands still. My friend ordered some apoxy and maybe we will try to cement the Washplate where the crack is and see if that will provide enough stability and strength to wash a load without cracking due to tension. It's powerful and washes nicely, when it works, but when the plate cracks where the screw is the party is over!! I may have to buy a name I recognize next time because other portable washers seem to have replacement parts that are more universal. I see a lot of whirlpools that have universal replacements available etc,. I never heard of Nictemaw or the brand you have, but it's the same machine. This plate seems to be a mystery. I can't find it. If anyone else has I would appreciate any leads to ensure an exact fit. These washers seem to have a much smaller plate than most available. Very strange. Also, is it possible for you to share the model number on the back of your unit. I am curious to see if the numbers are the same. They are identical with different brand names. But visually they are the exact same design.
Yes I will measure it and get back to you today, I saw the one you have and was trying to choose between which to buy. How long did you have it before it messed up?
@@aspiritofperserverance3900 The machine I have was purchased Sept. 21, 2022. Washplate broke Jan 06, 2023. It lasted 4 months. I was really enjoying it too. I am trying hard to see if there is a match somewhere online to purchase a replacement Washplate. Still no luck yet. If you or anyone can find this 11 in. Washplate that looks exactly like the one at the bottom of your washer. I would greatly appreciate it! We will see how the Apoxy seal experiment goes in the meantime when that arrives. In the worst case I will search for a similar washer with a better known name brand and search to see how many replacement parts are searchable online. I hope I can modify and fix this one successfully.
Yes it is 11”. If I do come across anything that has spare parts or any thing about that I will let you know. Thank you.
@@aspiritofperserverance3900 Okay. I am still searching and this is a challenge. After doing more research this a common problem with this type of top loading washer with Washplates. The part in the center that supports the screw is called a Spline if I am correct. It tends to crack inside the hole in the center. It's best to keep a few spares. The smallest I have found is 10 and 13 inches, 16 in. also, no luck with 11. If I find anything too I will update here. Otherwise, I recommend people buy a familiar name brand instead and verify how many universal replacement options are available for critical parts. Always buy a few Washplates for back up. I do have three spare hose connectors as those can be a problem. So far no leaks after I got a well made attachment on the water connection parts. Thanks again!
Your welcome, yes please do come back and update that would be very resourceful because I didn’t even think about how hard it may be to find parts for these off brands. Thank you 🙂
Has anyone had to replace the belt yet and if so help please.
I wash you could show us after you washed
Yes I'm sorry I do plan to do another video since I figured out how to pause the video and start back. Thank you will do soon, but am still satisfied with it.
@@aspiritofperserverance3900 that’s good I just purchased one today cause of your review. Thanks so much
Wow thats great!
What connecter did you find. And where.? Help
My connector came with it. If you go to Home Depot they will help you find the right connectors. Take what you can with you like the hose your using and what you can’t take with you take pictures and they can help you.
How do you make the water come out
Once you plug the hose to the faucet (using the supplied connectors) you turn the water on and that’s it. There’s like a valve shut off or something in the connectors it comes with that controls the water flow.
can you please provide what metal hose you bought ? I cannot find one that doesn't leak everywhere
www.homedepot.com/p/Everbilt-3-4-in-FHT-x-3-4-in-FHT-x-96-in-Stainless-Steel-Washing-Machine-Supply-Line-7243-96-34-1-EB/205854150?g_store=1019&source=shoppingads&locale=en-US&pla&mtc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax&cm_mmc=SHOPPING-BF-CDP-GGL-D26P-026_001_PIPE_FITTING-NA-NA-NA-PMAX-NA-NA-NA-NA-NBR-NA-NA-NEW-PMax-71700000097492030--&gbraid=0AAAAADq61Uc8_0F4h3Na1n_OIE33K-idz&gclid=Cj0KCQjwyLGjBhDKARIsAFRNgW89keB4XVzhdsv7fehIr8UEOYE0dRV_VLodN0NxfuDaVp3Oipu86OwaArrsEALw_wcB&gclsrc=aw.ds
I’m not saying this is the exact one but it looks like this one it is this type of metal hose. I actually took the hose that came with the Machine into Home Depot to make sure each end was the same connection.
@@aspiritofperserverance3900 thank you! I did the same and they gave me a rubber one and it still leaked everywhere
Your welcome, yeah try and get the metal one hopefully it doesn’t leak.
I'm sure you've figured out something by now, but for others....depending on how it's leaking, alot of times, Plummers Tape will do the trick.
If you don't know what that is, it's a thin, non-sticky tape like roll that wraps around the threading of the hose connectors. Usually, it's a white and blue tape roll sized roll. Can be found at Lowe's, Home Depot, Ace Hardware....I think even Walmart has it.
Can you wash jeans in quick wash or standard setting or heavy duty only ?
Yes quick wash is pretty much all that I use for all my clothes. I use the standard wash for my towels. Those are the only 2 settings I’ve used plus the spin cycle. I guess I should try all the cycles so I know how they work.
@@aspiritofperserverance3900 ok thank you it’s good to know I just received mine and was planning on testing out later today but don’t wanna mess it up lol how’s it holding up so far ?
Thank you so much!!!
I bought this washing I don't understand how it spin and dry. Any body can share the information. The screen shows E 3 and stops.
Please.ana
What does the manual say E3 is. I have my manual just not handy right now. Let me know if you don’t I’ll look up mine.
OK I looked it up and my troubleshooting says the E3 is top cover fault that means the cover is open during use so close your cover or make sure it’s completely shut down maybe the lever that the sensor or something then it’s not closed I’m not sure, but it says E3 is a top cover fault
How long is the warranty?
I don’t know for sure, I know I had 4 months to return to Walmart but it never hurts to try and return or get your money back after the time is up. I still have no problem with it.
Have you done a level 7 water level and heavy-duty wash ? My washer machine stopped washing and stayed on AA setting has that happened to you?
I usually do level 8 because I mostly wash full loads and sometimes I do level 1 for small loads like dish towels and it doesn’t always stop at the level 1. , it’ll fill all the way to an 8. I’ve used heavy duty a couple times and never had a problem with it stopping.
@aSpiritOfPerserverance thanks for the info. I just realized the heavy-duty cycle takes a while.
Lol, yes like over an hour!
I got it from Walmart, I’ll see if I can find the link
Does it spin dry
Yes and very well.
Hello ! Does anyone know how i need to fix my faucet or what to purchase because my faucet leaks bad when I turn it on
I don’t know what type of leak you are talking about but I use to connect my washer to my bathroom room faucet but it leaked and would even pop of so I started using my kitchen sink. I think it leaked in the bathroom because off the threading on the faucet.
I'm sure you've figured out something by now, but for others....depending on how it's leaking, alot of times, Plummers Tape will do the trick.
If you don't know what that is, it's a thin, non-sticky tape like roll that wraps around the threading of the hose connectors. Usually, it's a white and blue tape roll sized roll. Can be found at Lowe's, Home Depot, Ace Hardware....I think even Walmart has it.
I seen one on Walmart for 240 i think I’m cop it
That’s where I got mine, there is a 17lbs one and a 15lbs capacity one.
Wow nice! I might get one myself
Love it
Dies it try clothes?
Not completely dry it does the same as a regular dryer, it spin dries the clothes, so they are damp but not soaking wet
Dapat step by step tutorial,Oa naman neto magsalita
Wasting machine in the bathroom that’s a first.
Very common
@@LaughingblueSu right lol