I know this is already 3yrs old but I feel as if the front grill should have raptor sprayed on it but black. Keeping that texture on everything makes it 110% better.
So I did not have black tint available, the raptor black I had seen but it faded and did not look good. I agree I thought about the gloss black textured but the gloss broke it up a bit!
So it was the tint without binders, you do not need the full paint mix as the raptor will bond with the tint alone, I went to an automotive paint place called "finishmasters" and asked them for the jeeps paint code tint only with no binders.
That's awesome. I would love to do that when I get a jeep. I would totally do the grill in a black because it would match the fenders more than the gloss would. That's just my opinion though.
James Smedley so raptor offers a few colors but what I did was buy their tintable version and go to a automotive paint supply shop and order your paint code
1: I think you should line a grill in black. Take away that gloss bit still have the contrast. 2: How does it clean up? Assuming you off-road it atleast a little, how does the mud and such come off? Is it hard to get it totally clean or does a low power pressure wash do the trick? Very interested as I'm thinking of doing it to my TJ.
I debated the black grill but ended up keeping the tank colored grill. To clean is easy just power wash or spray with degreaser and power wash worst case use a soft bristle boat brush.
How many bottles did it take to do your 2 door? I'm prepping to do my 2 door JK soon and don't wanna pay for a ton of extra materials. I'm assuming I wouldn't need the full 8 bottles the 4door in the video needed?
BC Bell as a jku owner I follow a lot of jeeps on UA-cam and you my friend have the most civilized comment I have read by far. You didn’t criticize or give suggestions. Not even a “why didn’t you...”. Kudos man
Can anyone comment on the longterm durability of Raptor finish on a vehicle. 3,5 or more years down the road. Also is there a recommended topcoat (clearcoat?) that will enhance durability and appearance. Thanks. Great video.
@@TMogo116 Thanks for your reply. I have an '02 Black Dakota Quad cab that I purchased new. It's in great shape, except for the failed clear coat. Black Raptor seems like the best option for appearance and economy.
mjnc367 its all in the prep I would suggest against black or white as they show the dirt the most, the black looks like a crazy stealth fighter though lol
That was the same question I was gonna ask. Wait for a full cure then pull the tape or pull the tape while still "wet" to make sure the lines are sharp
Philip Whatley no, not while still wet, so in another video I showed a Jeep at the barett Jackson auction when you pull tape when wet you will get these tiny little hairs that come with it, I waited till dry to the touch and used an exacto knife and took my time to peel the tape up
I love the liner on the Jeep not does it only look great it's very functional for protection. Also keep the angry grill on the black does break it up very well. Awesome!!!
coming up on 4 years of no garage outdoor keeping, has not faded or cracked or come off I still keep in touch with the new owner and see pics of it regularly!
Hey, Great Vid. I am about to raptorline my Truck. I have been sitting on the idea for a good while and the time has come to finally do it. Few questions. I don't think you mentioned how many bottles it took you for this application? How much tint was required? Did you do one or two coats? How has it held up over the year? If you had to do it again is there anything you would have done different? Sorry for all the questions. Thanks again!!
One question, after I first say GREAT job, it looks ridiculously good man! I see you sprayed directly onto the door hinges, did it affect their motion at all, chip at all during their first movements after spraying? Getting ready to spray my 94 bronco and am wondering how to go about the tire swing. Congrats again, terrific outcome!
still looking awesome! It has been on many trail rides and is actually in a colder climate now up in one of the Carolinas. The new owner posts pics of it regularly and it has not peeled flaked or faded still looks just as amazing as when we finished!
@@wts860 do it no regrets! its all in the prep. shooting it is the easiest thing, take your time prep right tape good and let it cure and you will have no issues
Oh wow...I am speechless! It looks amazing! I love the gloss black grill, the red Jeep engine cover and the wheel and tire combo. I love the whole thing! Great job man.
David Froese thank you! I did make some changes check my newer vids I upgraded to 37s and machete beadlocks put the green grille back in and did the fenders in green and ... well you’ll see haha
when offroading usually you scratch up the paint on the jeep, down here in florida it is common for clear coats to bubble and peels the sun just cooks everything here, the raptor is much tougher and sprays on thick to withstand the scratches.
Did you have any problem putting the tail lights back on due to thickness of the Raptor? Did I notice you removed the windshield hinge cover bolts, why?
no i did not, so the first week or so the raptor really is not rock solid, it will still kind of be a bit rubbery. so you can get everything back on and torqued down and it will fit perfect
@@rmjryost It is still holding up amazing! I did trade the jeep in, but I have been in contact and friends with the new owner on facebook. He says its still the same no chips or anything. it is all in the prep. Also the dealer paid me top dollar as a trade. I had bought the jeep brand new for 51k I drove it for 3 years 35k miles and traded it in for 39,500 with the raptor
@@TMogo116 Hey I have a 2017 Granite Rubicon and going to do the Raptor Liner on it. So you dont have to use there tint colors you can use the stock color i.e. Granite, or Anvil, Rhino?
I thought you were making a mistake at first because the paint on the Jeep looked good. But when you finished it it looked amazing. Very good job looks extremely good and different. I love it.
This really looks good..at first I could see a stripping effect when you painted the passenger door but maybe that was before the second coat..It looks flawless in the sunlight...I have a Jeep project that is going to look like an extended cab M715 and also a Suburban modified to look like an Avalanche, and was thinking of coating them both with a dark gray Monstaliner...I had a Bronco that I used the Monstaliner on, and it looked good for a roll on, but a couple of the rollers begin to disintegrate and I had to pick out the pieces..maybe this Raptor liner is better...but if its urethane, that stuff is not good to inhale or get on your skin..even the fumes are bad for them eyes..I don't know, but that is what I heard..you haven't mutated into a zombie yet have you?
haha not a zombie so the trick is the very last coat you do a fluff coat so you stand back maybe 5 feet and light dust everything, the raptor has kind of a self leveling effect and you just fluff the whole thing and it will look flawless.
Hey man, amazing Jeep!!! I am about to do the same soon, I have a question, where did you get the tint. I want to do a light grey but I want to make sure I used the correct tint, also how much tint do you put per can?? Thank you and keep up the vids!!
Looks great! I’ll be doing this to mine in a couple of weeks. How much of the liner did you end up using and how many coats did you do? I only got an 8 liter kit. I think I might need more.
@@TMogo116 Hi - Great video. Thank you for making it. Couple questions - have you had any adhesion issues using 4 coats? I'd also like more coats for durability, but the manufacture says no more than 2 coats due to chemical build up between coats. Whats your thought on that? Also, I'm sure I missed it somewhere, but what PSI did you use? I really like that texture. Thank you!
Teodor Nenov it’s the angles because it sprays on kind of “fuzzy” instead of smooth the shine looks that way but it was a perfect match to the eye maybe the camera brought it out more
absolutely fantastic! I've been looking at line-x for my off road gmc but the shops want $10 k to start. Can you get a smoother finish? I'd rather not have such an aggressive texture.
EzEddie they will be coming! I recently moved to south Florida so we had rain season followed by hunting season nothing really crazy down here compared to say rausch creek up in pa but i will be taking some soon
If you do a follow up video about how the Raptor Liner has held up to the sun and weather elements please also do a close up shot of how the door jams look. In your video youre spraying it with the doors still on the Jeep so I would really like to see how the door jams look. What about washing mud off or just using a rag to wipe the Jeep down? Thanx! Looks great!
Abigail Sockeye I did lol but I taped it first, stickers like that will not hold on to the raptor liner after it’s done I thought it came out neat at the end having it embossed
I've watched every Raptor Liner video on UA-cam... Your in the top three if not the best... Probably the BEST..! Keep the grill... Love your Jeep..! Great Job..! I like this one a lot... ua-cam.com/video/2dzAZn4EA1Y/v-deo.html And love this Line-X Ultra Ford Raptor... ua-cam.com/video/MQX2pj-lbLs/v-deo.html
That's cool! I might want to do that to my Jeep, but only years later after my paint has gone bad.
WALTERRIFIC yea mine was all pinstriped from the trails and I figured why not lol
It's a Mopar paint job, it won't be long.
It was some beautiful paint, but the end result was still nice. I pity the fool that has to grind that stuff off 10 years from now!
Hi nice job 👍😎
How many liters you use
Jeep and Raptor liner go together like peanut butter and jelly.
looks fantastic! Keep the black grill.... the contrast of it looks great with all your black parts, trim, and windows
Lonnie Sullivan I did for a bit but I put the green one back in with some black mesh behind it and really liked the look lol haven’t taken it back out
Looks amazing. No more stone chips, rust, waxing. Low maintenance. Love it
Looks really good. Good spray pattern and the color looks better than other greens on here. Love it man!
I know this is already 3yrs old but I feel as if the front grill should have raptor sprayed on it but black. Keeping that texture on everything makes it 110% better.
So I did not have black tint available, the raptor black I had seen but it faded and did not look good. I agree I thought about the gloss black textured but the gloss broke it up a bit!
What’s the paint code for the green you used to tint the bed liner?
I think it is olive green raptor liner.
Please can you give us the code for PGK ??? thanks!!
Seriously what's the paint code
Yes please pain code? Good afternoon
Has this ever started pealing?
nope
@@TMogo116 that’s awesome. Thanks!
Very different to what I was planning on doing. I think my mind is changed! Thanks man. Nice work!
Was the tint just vehicle paint w/ the proper color code? I’m looking to do a Toyota pickup in federal color code 34076
So it was the tint without binders, you do not need the full paint mix as the raptor will bond with the tint alone, I went to an automotive paint place called "finishmasters" and asked them for the jeeps paint code tint only with no binders.
Mines been lined for 6 years and its tough as nails, I hope your holding the title to that jeep.
yep shes mine
has it oxidized or changed color at all in that time?
Is it 6 years of Raptor Liner? I know they claim UV protectant, just would like to hear someone that has had it for a few years.
Has it faded?
what does something like that cost?
Where’d you get that spare tire mount
sorry late response it was from Ace engineering
That first sand contact hurt a little but it was suprising to see your commitment. Looks hella nice bro! You got a sub.
cautiontext Text thank you!
How do you get each bottle to be the exact same tint? I know you measure but there’s still some paint left in the buckets
each bottle got 75ml of tint and then mixed for 3 minutes each so even if there is some left in the bottle they were all the same mix and time.
how many bottles of liner did you use?
jcorriveau49 I did the whole Jeep the fenders and a set of half doors I used about 8 bottles but you can get away with 6
That's awesome. I would love to do that when I get a jeep. I would totally do the grill in a black because it would match the fenders more than the gloss would. That's just my opinion though.
Dylan Foster agreed. Black raptor line the grill. The gloss has too much contrast
How do you get the exact color you want? Do they have colors to choose from or do you email them some code of whatever color you have on your vehicle?
James Smedley so raptor offers a few colors but what I did was buy their tintable version and go to a automotive paint supply shop and order your paint code
1: I think you should line a grill in black. Take away that gloss bit still have the contrast.
2: How does it clean up? Assuming you off-road it atleast a little, how does the mud and such come off? Is it hard to get it totally clean or does a low power pressure wash do the trick? Very interested as I'm thinking of doing it to my TJ.
I debated the black grill but ended up keeping the tank colored grill. To clean is easy just power wash or spray with degreaser and power wash worst case use a soft bristle boat brush.
Like how much dose something like this cost
sorry late reply I believe all the materials and stuff was less than $1k
Looking good! Black grill looks the best 👍
for now I have the tank colored one in but I might rotate the black one back in. Not sure for now
Raptor Liner is the shit. i just did my 2 door JK a few weeks ago in OD green and my friends are still amazed at how good it came out.
Yea I get the same!
How many bottles did it take to do your 2 door? I'm prepping to do my 2 door JK soon and don't wanna pay for a ton of extra materials. I'm assuming I wouldn't need the full 8 bottles the 4door in the video needed?
Really LIKE that FACTORY color though, but I get it...who wouldn’t want a ‘kevlar’-coated Jeep (JKU in my instance)...
As a jku owner, I follow A LOT of Jeeps on UA-cam and I have to say, you my friend, have THE best looking Jeep I’ve seen! Kudos! Looks amazing! 👍🏼👍🏼😍
BC Bell thanks man! Really that’s awesome to hear!
I agree! #JeepGoneWild!
BC Bell as a jku owner I follow a lot of jeeps on UA-cam and you my friend have the most civilized comment I have read by far.
You didn’t criticize or give suggestions. Not even a “why didn’t you...”. Kudos man
How is it 4 years later?
So I still keep in contact with the new owner it now is in NC and holding up perfect! I see he posts pics of it now and then still looks great
@@TMogo116 and was it cheaper than a regular paint job?
That is Bad Ass. But i would flat black the grill just so it matches the fender flares and bumpers
I thought about it
@@TMogo116 how did you keep the Rubicon sticker on the hood pls explain trying to do mine but not sure how you did it to keep the original sticker on.
@@taulandradaj2001 watch the video... i taped over it and cut it out then removed the tape after
@@TMogo116 THANKYOU i thought doing it like that would have been covered from paint and not being
able to see it>?
How hard is it to clean off after a wheeling trip?
with the power washer and a boat brush it is awesome, no need to dry after
@@TMogo116 awesome! Thanks
Yeah, question. TOTAL cost for finished product?
about $800 in materials
@@TMogo116 That's really cheap for car paint. It looks really good! I love the color! The white Rubicon looked great also.
If I do it myself, how much $ would I spend in material ?
I already have some of the mayor tools 🤔
I have a 2 D Tj .
Can anyone comment on the longterm durability of Raptor finish on a vehicle. 3,5 or more years down the road. Also is there a recommended topcoat (clearcoat?) that will enhance durability and appearance. Thanks. Great video.
mjnc367 the White Wrangler in the beginning had been lined for 4 years it holds up very well no clearcoat is needed as it will turn yellow
@@TMogo116 Thanks for your reply. I have an '02 Black Dakota Quad cab that I purchased new. It's in great shape, except for the failed clear coat. Black Raptor seems like the best option for appearance and economy.
mjnc367 its all in the prep I would suggest against black or white as they show the dirt the most, the black looks like a crazy stealth fighter though lol
You rocked that RUBICON sign in the front
Thank you!
Great looking Jeep, well done! I've been wanting to do liner on my 2011 JKU...
Go for it! you wont regret it. There is no turning back once you start though lol
I am looking to do my Jeep, but I want the raptor grain to be super thin/light, what would you suggest to get that finish?
super high psi, shoot it at 95+
Absurdly awesome!!!!!! Sweet rig , like the glossy black grill
Thank you!
The Jeep turned out sick af!!! I’d say go back to stock grill .. I personally don’t like the angry bird grill
I agree the matching green looked better.
How does it hold up to mud? If you don't wash it off right away will it stain?
Awesome man, i love it. Looks bad ass! i Raptor lined my interior not the whole jeep lol
Copperhead_jk lol that’s next for me
Cant wait to see that bro!
Was it hard peeling for the decals?
Jordy Hernández yea let it dry and take your time
That was the same question I was gonna ask. Wait for a full cure then pull the tape or pull the tape while still "wet" to make sure the lines are sharp
Philip Whatley no, not while still wet, so in another video I showed a Jeep at the barett Jackson auction when you pull tape when wet you will get these tiny little hairs that come with it, I waited till dry to the touch and used an exacto knife and took my time to peel the tape up
@@TMogo116 ahhh that makes sense. Thanks for the reply!
What psi did you use on you’re compresor to get that finish?
I love the liner on the Jeep not does it only look great it's very functional for protection. Also keep the angry grill on the black does break it up very well. Awesome!!!
How long does it last or does it fade
coming up on 4 years of no garage outdoor keeping, has not faded or cracked or come off I still keep in touch with the new owner and see pics of it regularly!
Great job friend...jeep looking awesome
Should have sprayed the fenders black as well as the wheel wells
Looking at doing this, and have watched a lot of videos. I think this is the best look out of all of them?
Thank you!
What kind of paint did you use to tint the liner?
Any automotive paint tint will work. I used jeep paint code PGK.
This looks great!
Rich Beach thank you
Wow that looks incredible. Love the color scheme with the red accent too
Hey,
Great Vid. I am about to raptorline my Truck. I have been sitting on the idea for a good while and the time has come to finally do it.
Few questions. I don't think you mentioned how many bottles it took you for this application? How much tint was required? Did you do one or two coats? How has it held up over the year? If you had to do it again is there anything you would have done different?
Sorry for all the questions. Thanks again!!
How did it turn out?
can you wash the car using the pressure washer ?
Yep 100% that is what I recommend
Did you clear coat it? I’m about I do my Dakota charcoal grey.
Micheal Scott no the product has uv blockers in it
That looks great, the black grill really makes it pop
Thank you!
Great job bro. Turned out great. Did the same on my hardtop
Thank you!
Gret video, thank you how many cans of liner did you have 2 use
With the half doors we used about 8 bottles but I do not see a need for more than 6 if you are doing a jeep.
One question, after I first say GREAT job, it looks ridiculously good man!
I see you sprayed directly onto the door hinges, did it affect their motion at all, chip at all during their first movements after spraying?
Getting ready to spray my 94 bronco and am wondering how to go about the tire swing.
Congrats again, terrific outcome!
the hinges were fine no issues at all. Thanks
How has it held up?
still looking awesome! It has been on many trail rides and is actually in a colder climate now up in one of the Carolinas. The new owner posts pics of it regularly and it has not peeled flaked or faded still looks just as amazing as when we finished!
@@TMogo116 thinking about doing a suburban i just got
@@wts860 do it no regrets! its all in the prep. shooting it is the easiest thing, take your time prep right tape good and let it cure and you will have no issues
How much was it?
2017 Jeep jk materials came to about $800
@@TMogo116 what is the color code? If you don't mind
Hi, sorry for asking, any ideea what color code has factory Jeep color Tank PGK?
Correct the color code on mine was PGK and that is what I used
Paint tint? The PJK tiny, is that made by raptor liner? Or can you use any tint brand?
2k acrylic paint, or any urethane or acrylic paint tint can be used
Oh wow...I am speechless! It looks amazing! I love the gloss black grill, the red Jeep engine cover and the wheel and tire combo. I love the whole thing! Great job man.
David Froese thank you! I did make some changes check my newer vids I upgraded to 37s and machete beadlocks put the green grille back in and did the fenders in green and ... well you’ll see haha
T Mogo116 Oh k ya this is the first video of yours I've seen so ya I'll check out the update!
Looks Great. I see its a low gloss finish! How did you achieve that, I thought the raptor liner was high gloss
maceybradley no binder in the tint and shot it at 85psi
@@TMogo116 I'm going to be painting mine soon here, I love this color and sadly wanna copy you lol ... but what is the binder in the tint?
What are the benefits of Raptor lining the jeep over the standard paint? Does it look better than paint?
when offroading usually you scratch up the paint on the jeep, down here in florida it is common for clear coats to bubble and peels the sun just cooks everything here, the raptor is much tougher and sprays on thick to withstand the scratches.
Keep up the good work my boy, love the vids
Anthony Ortiz thank you man I’m trying lol
Did you have any problem putting the tail lights back on due to thickness of the Raptor? Did I notice you removed the windshield hinge cover bolts, why?
no i did not, so the first week or so the raptor really is not rock solid, it will still kind of be a bit rubbery. so you can get everything back on and torqued down and it will fit perfect
@@TMogo116 So, I just posted on the JKForum asking for any tips/suggestions. Are you regretting having done the Raptor? Has it held up well?
@@rmjryost It is still holding up amazing! I did trade the jeep in, but I have been in contact and friends with the new owner on facebook. He says its still the same no chips or anything. it is all in the prep. Also the dealer paid me top dollar as a trade. I had bought the jeep brand new for 51k I drove it for 3 years 35k miles and traded it in for 39,500 with the raptor
Jeep looks awesome! Just curious how many liters did you use?
Baldo Bazan 8 total
fantastic job
Thank you!
I know this is an old video. Did you spray the door jams with Raptor as well? About to do mine soon.
Oh snap it looks good! Whats the color name/code :)?
its called PGK Tank.
Did you just use a red scuff pad to scuff the whole thing or did you use any sandpaper? I’d just the scuff pad hows it holding up?
yes just the 3m scotch pads, no sanding needed you just need the clear to be roughed up so it sticks. It still looks perfect
How much was the "tank" paint from your auto paint shop?
About $100 for a quart
@@TMogo116 Hey I have a 2017 Granite Rubicon and going to do the Raptor Liner on it. So you dont have to use there tint colors you can use the stock color i.e. Granite, or Anvil, Rhino?
I thought you were making a mistake at first because the paint on the Jeep looked good. But when you finished it it looked amazing. Very good job looks extremely good and different. I love it.
This really looks good..at first I could see a stripping effect when you painted the passenger door but maybe that was before the second coat..It looks flawless in the sunlight...I have a Jeep project that is going to look like an extended cab M715 and also a Suburban modified to look like an Avalanche, and was thinking of coating them both with a dark gray Monstaliner...I had a Bronco that I used the Monstaliner on, and it looked good for a roll on, but a couple of the rollers begin to disintegrate and I had to pick out the pieces..maybe this Raptor liner is better...but if its urethane, that stuff is not good to inhale or get on your skin..even the fumes are bad for them eyes..I don't know, but that is what I heard..you haven't mutated into a zombie yet have you?
haha not a zombie so the trick is the very last coat you do a fluff coat so you stand back maybe 5 feet and light dust everything, the raptor has kind of a self leveling effect and you just fluff the whole thing and it will look flawless.
Let's see your M715 project jeep
What color is that if you don't mind going to do my 06 tj the same
This is the stock 15 color TANK the paint code is PGK
Hey man, amazing Jeep!!! I am about to do the same soon, I have a question, where did you get the tint. I want to do a light grey but I want to make sure I used the correct tint, also how much tint do you put per can?? Thank you and keep up the vids!!
juanangel86 I got it at a place called finishmasters I used about 75ml per bottle of raptor
Great job. That jeep looks bullet proof man. Awesome.
R Perez thanks man!
Looks great! I’ll be doing this to mine in a couple of weeks. How much of the liner did you end up using and how many coats did you do? I only got an 8 liter kit. I think I might need more.
I used 8 bottles of raptor it was about 4 coats I would say
@@TMogo116 Hi - Great video. Thank you for making it. Couple questions - have you had any adhesion issues using 4 coats? I'd also like more coats for durability, but the manufacture says no more than 2 coats due to chemical build up between coats. Whats your thought on that? Also, I'm sure I missed it somewhere, but what PSI did you use? I really like that texture. Thank you!
Looks AWESOME!!! Keep the black grill on. Great contrast
That grill looks great.
Rving With The Rivera's thank you!
T Mogo116 . what is the color? I want the same color...
Is it still holding up?
Coating looks awesome, but I hate those grilles. They look like the Jeep is scowling.
But why it looks much brighter and more yellow than green ? Maybe when you mix with bedliner the colour changes ?
Teodor Nenov it’s the angles because it sprays on kind of “fuzzy” instead of smooth the shine looks that way but it was a perfect match to the eye maybe the camera brought it out more
@@TMogo116 Will paint my pickup in same colour next week . Looks cool
Quick question about the liner. Did you just use auto paint for the tint? What is the appropriate mixture ratio
I used automotive paint tint, I bought it from a auto paint supply store, I used 75ml of tint in each bottle of raptor.
What’s the average cost?
out of pocket around $800 if you had a shop do it around 1500-6k are the prices I have seen
Ok thanks
absolutely fantastic! I've been looking at line-x for my off road gmc but the shops want $10 k to start.
Can you get a smoother finish? I'd rather not have such an aggressive texture.
The higher the psi you shoot at the less aggressive it will be
best looking jeep I've ever witnessed
Thank you!
You got a nice ass Jeep man but do you ever take her off-road where’s the wheeling vids ?
EzEddie they will be coming! I recently moved to south Florida so we had rain season followed by hunting season nothing really crazy down here compared to say rausch creek up in pa but i will be taking some soon
I have watched several raptor liner installs and hands down yours came out the best.
Looks great I love it you are very brave. I have a Rubicon scare to do that.
Rving With The Rivera's lol my paint was already scratched from trails I figured it couldn’t get worse
Door inserts is a awesome touch. Well done.
Looks great👍🏻
KingsDisasterGarage thanks man hopefully will look even better for Jeep beach
If you do a follow up video about how the Raptor Liner has held up to the sun and weather elements please also do a close up shot of how the door jams look. In your video youre spraying it with the doors still on the Jeep so I would really like to see how the door jams look. What about washing mud off or just using a rag to wipe the Jeep down? Thanx! Looks great!
no rag as it will get hung up on the raptor but power washer works great with a soft boat brush or just spray with degreaser
Hey man im from nj too... i want to do the same
The Ginz I moved to Florida but yea I grew up in Bergen county, go for it!
By tint...I am assuming it is just the Tank clear coat real paint?
Still holding up well now that you have had it on awhile?
yea I have to do a review video! but it is holding up fine!
How much Tank green paint was used?
it wasnt really paint it was the tint each bottle got 75ml
T Mogo116 Just buy at the auto paint store?
Looks amazing! Thanks for the links, did you bought the tint through mopar directly?
TRAIL HUNTERS 4X4 OVERLAND I got it from a local automotive paint shop
does anyone know where i can get paint like this? Like a link or a website?
amzn.to/2YrqeRk
The color code is PGK
Beautiful jeep 😍
Danny Rc thank you!
Late to the party here but why not have all the bumpers and fenders sprayed in black?
Cody Leon the factory powder coat on them was actually pretty good and durable I didn’t feel it was needed
Just paint over that Rubicon symbol.
Abigail Sockeye I did lol but I taped it first, stickers like that will not hold on to the raptor liner after it’s done I thought it came out neat at the end having it embossed
Looks good partner 👍
No why would he want to do that. Makes it pop the way he did it.
Would love this color on my JK. That green is great. Looks fantastic.
Thank you! It was my stock color Tank the paint code was PGK
Fuckkkk, looks sick. Awesome Jeep man. -CJKC
Luke M thanks man!
About to do my 2002 xterra OD green, then standard 3 color woodland camo.
I've watched every Raptor Liner video on UA-cam... Your in the top three if not the best... Probably the BEST..!
Keep the grill... Love your Jeep..! Great Job..!
I like this one a lot... ua-cam.com/video/2dzAZn4EA1Y/v-deo.html
And love this Line-X Ultra Ford Raptor... ua-cam.com/video/MQX2pj-lbLs/v-deo.html
Out-F'ING-standing work!