They say to boil the potatoes for three minutes or potatoes has to be ripe. I got the refund, it is crap. When I got time I put the screw and bolt to make it strong
ACTUALLY.... If you want the potato to get out of the cutter easier you should point the ROUND part of it towards the blade and NOT the FLAT part. If you know anything about physics that is.
The problem with this machine is that they use hollow rivets which are fine for fixing pockets on jeans, but are useless on this machine !!! I removed all the rivets and replaced them with machine screws, washers and locking nuts. The machine is infinitely better and is very rigid and cuts perfectly. Everyone complains that Stainless Steel Chip Cutters bend and fall apart !!!! They would not if you were to use solid steel rivets !!!!
I have one just like this and everytime I go to cut some frys with it the damn blade just comes off and its not supposed to and it also bends the the whole machine so IDK if it's the machine itself or maybe it could be something else so please let me know what it really is Thanks.
I think some potatoes are just had to but. If you find it hard to cut with a regular kitchen knife then it will be even harder for this little machine. I found some potatoes that work perfectly and others that don't because of their hardness.
Indeed. If you need to process a lot of fries each day, better to have it attached to a wall with a bucket underneath so you can just put a potato in and have the sliced potato go directly in the bucket.
I would rate it 5 out of 5 because the price is very low compared to other professional slicers. It is a bit flimsy, but it does the job and it's very cheap.
My Lakeland is much better but not available now they improved it and added a second Dicing function by adding a push down one as well but quite expensive at £30
Brought this.crap to flimsy doesnt cut potatoes.please stay away from this product.0/10 stars.hoping for a refund befor i leave crap feedback.be warned save your money
Umm. I DIDN'T like it this brand. It doesn't stay still on the table while cutting. Small pieces of potatoes were waisted..Idk but seem too much of work for me
This guy's motor skills are not good ...If your right handed it's your power hand and the top of the handle is there for a reason not to push it down from the middle . I'd expect a kid to do it this way . Good Luck .
I bought this machine: 1st use, the blade got damaged. 2nd use, the machine broke apart completely. I returned it for a full refund, absolutely usess chip cutter, don't ever waste your money and time buying this machine! 🤚
I've the same at home, rubbish at cutting chips. I feel the machine bending when using it and sometimes spuds jam in it.
I love ur review, this gives me a clear version of what it actually does bless you man
They say to boil the potatoes for three minutes or potatoes has to be ripe. I got the refund, it is crap. When I got time I put the screw and bolt to make it strong
Newer version now$30... bought new one last yr and used only twice now and so much easier/faster than by hand. Thx for demo...great job☺️
Good Lord, man, you make it look, practically impossible to operate. It's like the happy housewife helper on the honeymooners!
Wow, thanks!
Это видео, самая сильная антиреклама этого приспособления 😂😂😂.
ACTUALLY....
If you want the potato to get out of the cutter easier you should point the ROUND part of it towards the blade and NOT the FLAT part.
If you know anything about physics that is.
The problem with this machine is that they use hollow rivets which are fine for fixing pockets on jeans, but are useless on this machine !!! I removed all the rivets and replaced them with machine screws, washers and locking nuts. The machine is infinitely better and is very rigid and cuts perfectly. Everyone complains that Stainless Steel Chip Cutters bend and fall apart !!!! They would not if you were to use solid steel rivets !!!!
maybe its done on purpose, so that the devices goes bad early and you buy one more
@@xc4945 that’s a production industry for ya lmao
Hand cut fries are best cooked when they're twice fried
Really? Then why fries we bought tastes better? They also using cutters
I like it for the price. My handle sticks. What is best to use on it?
Nice kitchen
Very nice
Awesome
I have one just like this and everytime I go to cut some frys with it the damn blade just comes off and its not supposed to and it also bends the the whole machine so IDK if it's the machine itself or maybe it could be something else so please let me know what it really is Thanks.
I think some potatoes are just had to but. If you find it hard to cut with a regular kitchen knife then it will be even harder for this little machine. I found some potatoes that work perfectly and others that don't because of their hardness.
pretty awesome gadget
I think so too!
Good, but cutter needs a weight base for fast work, ordered one, thanks 4 demo
Indeed. If you need to process a lot of fries each day, better to have it attached to a wall with a bucket underneath so you can just put a potato in and have the sliced potato go directly in the bucket.
С сантиметром еще нужно к этому делу подходить🤣🤣я руками быстрее нарежу соломку. Фигня это бесполезная.
I think when it comes to appliances if unbranded better to get from physical shop than from Amazon
Works best with pointy end of potato towards the blades not the flat end
Yes, I noticed that too :)
I wonder: would you rate this particular slicer as suggested one?
I would rate it 5 out of 5 because the price is very low compared to other professional slicers. It is a bit flimsy, but it does the job and it's very cheap.
I wouldnt let that fella near anything sharp
My one is damaged after a very first use it’s not reliable
Chinese crap, why they are selling before testing it, I got the money
My Lakeland is much better but not available now they improved it and added a second Dicing function by adding a push down one as well but quite expensive at £30
Nice kya rate hai es ki
😋
This manual machine needs a hand like yours 😜
I have this unit.. POS.. after using it a bit. spend more money and you will be super happy..
Well, so much for those "stabilizing" suction cups.....
My daughter bought one of these as a gift, and frankly I'm sorry she wasted your money. Bed Bath & Beyond should not even sell these things.
Если мужчина с таким усилием это делает, то женщине вообше не подходит
Brought this.crap to flimsy doesnt cut potatoes.please stay away from this product.0/10 stars.hoping for a refund befor i leave crap feedback.be warned save your money
Yep, sent mine back straight away.
Can it be used for carrots too?
Never tried it, but I believe it can be used to cut carrots or other vegetables.
Whr will we find this potato cutter? And how much the price?
Please look in the video description here on UA-cam
Price kya hai
Thank you for the video ...... think the kitchens maybe too full of other gadgets to find a real use on this . Ill just use a knife .
Glad you liked the video. One time I had to make about 20kg of fried potatoes. This tool made my job A LOT easier! :)
@@DailyCoolGadgets Good on ya . Theres only myself and the mrs so ......
Got to love a gadget though :-)
Cut the potato in half? I guess you call them mini fries
مشحال التمان من فظلك
Problem is, my wife doesn’t have fore arms like that.
Then u do it are you limp wristed lol
Is this available in the market?
Don't buy it is crap
Yes, Trigger.
All the flathin around,I'll just stick to the knife method
Those are the shortest chips ever.no ways
Sorry mate, I had only a few small potatoes at the time :)
The time it takes to faff about lining the spud up I could of done it with my knife…..
Oh no! Your killing my brother
After the second potato it bent up and I threw it in the bin. Absolute waste of money.
Looks more like a mouse 🐁 trap slice chopper by the he is using it ?
Одноразовая хрень !
Plise help me a nid this machin
Find the link in the video description
Anis Anis8 ... you can find this on ebay for 6 £. Write "potato cutter"
Too much work and force plus no whole potatoes?
How much
You can find out the prices if you follow the link in the video description.
Look like old washing machine
😊😊👍👍🤝🤝
ليست عملية كثيرا للوجبات الكبيرة..
Boo .....small fries
🤣🤣 time wasting video and machine
Umm. I DIDN'T like it this brand. It doesn't stay still on the table while cutting. Small pieces of potatoes were waisted..Idk but seem too much of work for me
I like it because it's very cheap and it dose the job fairly well :)
Думаю фигня какая-то
its a garbage
Useless its very slow
How to make a two second job look like an hour .
So bad .very very complicated!!!!!!!!!!!
This guy's motor skills are not good ...If your right handed it's your power hand and the top of the handle is there for a reason not to push it down from the middle .
I'd expect a kid to do it this way . Good Luck .
Not sure what you are trying to say, but good luck to you too :)
Good clip,
Awfull machine
Just go to Macdonalds.
In some countries McDonald is more expensive than potatoes
@@cristianmartinez9049 but where does mcdonalds come from?
@@cristianmartinez9049 ya Im from India and if I make fries on my own it costs around 40 Rs and if I get from Mc D its 375 Rs. Potato being 20Rs
👎
Very bad machine money waste
🤣🤣🤣🤣 machine kubafu
I'm about to buy it. But these comments are giving me goosebumps.
I bought this machine:
1st use, the blade got damaged.
2nd use, the machine broke apart completely.
I returned it for a full refund, absolutely usess chip cutter, don't ever waste your money and time buying this machine! 🤚
No explanation NO
SUBSCRIBE 👎