How to remove stripped carburetor screws
Вставка
- Опубліковано 19 бер 2017
- How to remove a stripped carburetor screws. This will work on all types of screw type fasteners.I demonstrate a few methods on how to remove stripped or rounded screws from a carburetor.
#Harleydavidsonfix - Авто та транспорт
I love a how to vid that skips all the unnecessary bull and gets right to it. Thanks for this!
Happy to help. Thank you for watching and you sub 9988ScooterGirl.. Ride safe and have a great day.
Perfect how to video. Not a bunch of blah blah blah. Straight to the nuts n bolts of the operation. Works like a charm.
Those screws can be a real pain. Happy to help. Thank you for your Sub. Ride Safe and have a great day.
Remember the carb screws (including Harley Keihins) ARE NOT Phillips head! They are JIS heads. Bits and screwdrivers are easy to find online. JIS tips would save many mechanics pain if they knew about the difference, and the right tip can remove even moderately trashed screws.
So true....
So how can you tell if its a JIS, BTW thanks for the info I have never heard of these. ( 59 years old )
@@rsk8310 to know if it’s a JIS or not check to see if there is a dot or circle engraved on the screw
Thanks for the information. I was trying to remove a carburetor drain screw from my Yamaha TW200 with a regular Philip’s screwdriver, when I examined that screw head it had the dot indicating it’s a JIS screw. I badly stripped that screw so now I’m going to have to use an extractor. I just ordered a set of JIS screwdrivers on Amazon.
@@rsk8310 Embarrassing but I am 67 and recently came across the JIS standard, after stripping out the float bowl drain screw on my Suzuki DR650. This video does a good job of explaining it. ua-cam.com/video/VpqUhIZ-EJo/v-deo.htmlsi=BdYFGZwhZ_dQFklE
That vicegrip idea was amazing haha I’m getting that before I use my screw extractor
Happy to help. That's the way I do it start with a vice grip and that usually works. Thank you for watching and your sub Parker. Let us know how it works out. Ride safe and have a great day.
Vice grip locking pliers for the win!!! Thanks so much for the idea, never thought to do that!
Happy to help I'm glad to hear everything worked out. They can be a real pain those stripped carburetor screws. Thank you for watching and your sub Luke. Ride safe and have a great day.
Thanks sir, the wise grip trick worked perfectly. I wouldn't have thought about it.
Happy to help. Thank you for watching and your sub. vondenballs. Ride safe and have a great day.
Let me know if you have any question.
Two Wheel Rocco
wow Im very surprice how u taking
out the screw .Can You please tell me the name of the tool you used ?
Gribit www.ebay.com/itm/Alden-Pro-Grabit-screws-Extractor-Set-of-3-Sizes-with-Case-/272588417625?hash=item3f77892a59:g:6O8AAOSw9GhYdRs5 Hope this Helps.
Two Wheel Rocco thank You
like your videos
What size should I get? I'm trying to remove strip screw of carburetor bowl it's actually holding the fuel solenoid anti backfire on...but I need to remove it to get to the bowl nut....what size is this I'm trying to make sure I get the right size grabit
Hey two wheel Rocco my bike was idling very low so I decided to take off the carburetor which I did but I did not undo the throttle cables so I worked around it I sprayed carb clean from the top of the carbs in each port and put everything back and now my bikes misfiring and only goes 60 mph tops it’s a 2007 yzf 600r hope you have some advice
Thank u so much ,I needed this advice for today , appreciate it a lot
Happy Help, Thank you for your Sub . Ride Safe and have a great day.
Brilliant video very helpful thanks for posting.
Happy to Help. Any questions just ask. Thank you for watching and your sub artiexr. Ride Safe and have a great day.
Can't believe I didn't think of using vice grips. Perfect!
Happy to help. Any questions just ask. Thank you for watching and your sub. Lark. Ride safe and have a great day.
Dude big help! Great vid thanks
Happy to help. Those cheap screws will get us every time. Thank you for watching and your sob Leo. Ride safe and have a great day
Didn’t know this existed, how useful.
I agree, They are great to have in your toolbox. Thank you for your Support. Ride Safe and have a great day.
great tutorial i learned a lot thank you
Happy to help. Any questions just ask. Thank you for watching and all your support SIK. Ride safe and have a great day.
The vice grip trick helped to remove the seized screw instead of buying a new carb. Thanks mate 👍
Happy to read alll went well.. Thank you for watching and your sub SG. Ride safe and have a great day.
@@TwoWheelRocco subscribed mate 👍
@@santhoshganapathy105 Thank You, My Friend...
thanks budy had the same problem on my pitbike and carburator was clauged
VERY HELPFUL!!
Happy to Help, Any questions just ask. Thank You watching and your Sub.Michael. Ride Safe and have a great day.
Great vid
Happy to help. Any questions just ask. Thank you for watching and all your support arond. Ride safe and have a great day.
I was about to buy a new carb but managed to get every single corroded screw out using mole grips! Thanks buddy
Happy to help. Glad it all worked out because it's always best to stay with that original carburetor. Lots of cheap China stuff out there. Thank you for watching and your sub ZXR. Ride safe and have a great day. Let us know how it worked out when you get her running.
Nice, thanks.
Happy to help, Any questions just ask. Thank you for your Sub Cheyo. Ride Safe and have a great day.
i’m gonna try this
Happy to help. Any questions just ask. Thank you for watching and your sub Charles. Ride safe and have a great day.
Thank you sooo much man!=
Happy to help. Any questions just ask. Thank you for watching and your sub Logan. Ride safe and have a great day. Let us know how it works out.
Thank you so much!!!
Happy to Help, Any questions just ask. Thank You for watching and your sub Dr. Brads. Ride Safe and have a great day.
Thank you
Happy to Help. Thank you for watching and your Sub Joshua. Ride Safe and have a great day.
Great as always Sir.. I'm going to watch your VTX carb/jet cleaning vid as I do my first removal of my 1300R carb since I bought the bike.. Idles ok when 1st starting up and reducing the choke but after about a mile when I come to a stop the idle has dropped so low it shuts the bike off.. I have to crank it and turn the idle screw up to maintain a stop light idle without revving the engine.. I hope the idle jet being dirty is the cause.. wish me luck!
What year? How many Miles? check petcock vacuum for leaks... ua-cam.com/video/7Fo9Q93OJXI/v-deo.html Just review to make shore yours is working properly...Let me know how it works out.
Hello Sir.. it's a 2009 with 6,650 miles.. as crazy as this sounds, it was fine before I shot some carb cleaner into the intake following your plug/air filter video ( and No I'm not blaming you :-) ) I'd been using the choke to start it.. but just read last night that it's not a true choke but just causes the unit to dump more fuel into carb for startup/warm-up.. I was thinking maybe that's throwing the air/fuel mix off for the 1st few miles? I doubt it.. but it's strange when I test drove it straight of the dealer's floor (cold start) bought it the next day (cold start) road it 50 miles home, next day cold start ride.. no issues whatsoever.. but, after I bought new plugs ( gapped them at .035 ) and a new air filter ( shot a little carb cleaner in just like you did ) the loss of idle speed after 1st mile of riding and coming to a stop at a light just causes it to react like I'd turned down the idle by adjusting the nut.
Go over what you have done....You will find the problem...VTX are great bikes check plug wire connection...If it ran... it will not be the carb..You did not touch the carb....You will fix it. put old plugs back in. .Let me know what it was.
You were correct.. I took your advice and did not touch the carb.. since the only other thing I did was plugs and air filter, I cleaned and re-gapped the plugs to .032.. and will NEVER touch the choke again.. re-packed my Vance & Hines Slash-Cuts with a 10x10 inch piece of fiberglass.. and she's all well and sounding Vicious.. :-) Thanks for steering me away from the carb for now.. I'll ride the summer out and pull all jets for cleaning next winter should have about 8K miles by then.. Thank Again for your support! P.S. you should do a Coolant Replacement Video.. Ride Safe.. and I'll continue to watch your Excellent Vids.. :-)
another thing that can make all the difference--penetrating oil, like PB blaster. it will loosen up the rust and make the seized screw easier to come out
I agree, Thank you for your Sub and comment. Ride Safe and have a great day.
You sound like Mike from breaking bad/bcs 😆
Thanks for the tip
Happy to help. Any questions just ask. Thank you for watching and your sub. Aloysius. Ride safe and have a great day.
do i need to buy a whole rebuild kit to replace the screws or should a hardware store be able to help me out?
Hardware store will have the screws..
Thanks rock
Glad to help, Any questions just ask. Thank you for watching and your sub . Ride Safe and have a great day.
Thank u bro
Happy to help. Thank you for watching and your sub Ortiz. Ride safe and have a great day
thanks
Happy Help, Thank you for watching and your Sub Ross . Ride Safe and have a great day.
Vice grips did it. Thanks bud.
Happy to help. Those vice grips do wonders. The hardware is made out of cheap metal strips in a minute. Thank you for watching and all your support Alaska. Ride safe and have a great day. Any other questions just ask.
I just ended up hack sawing the heads off and using pliers once the bowl was off to remove the rest. Get new screws lol
End results that's all that matters. Any questions just ask. Thank you for the update. Ride safe and have a great day
Not a bad idea lol
God bless your soul!!!
Happy everything worked out. Thank you for watching and your sub.Tookey. Ride safe and have a great day
Everybody praises this man he is the messiah!!!
Happy to help. Any questions just ask. Thank you for watching and your sub Alexander, Ride safe and have a great day
This got me out of a hot pickle. 7 of the 12 were stuck.
Happy to help. I agree the screws are soft metal. They stripped just looking at them so he's good to hear when things work out. Thank you for watching and your sub Garrett, Ride safe and have a great day.
I have a couple of stripped screws in my carburetor. Was wondering if you or anyone knew where to get new ones? Can’t seem to find carb screws online myself
Happy to help. Any questions just ask. Thank you for watching and you sub Tony. Ride safe and have a great day. Ebay www.ebay.com/itm/234479430857?hash=item3698102cc9:g:DNUAAOSwkDBiO7qp. Hope this helps.
Name of exact tool .i m from asia.name which i can type online store
www.amazon.com/Magimous-Damaged-Screw-Remover-Extractor/dp/B01NGTLM40/ref=asc_df_B01NGTLM40/?tag=hyprod-20&linkCode=df0&hvadid=198092200243&hvpos=1o1&hvnetw=g&hvrand=2375045217024268255&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012431&hvtargid=pla-318198613386&psc=1. Hope this helps
Another way...take a die grinder with a cutting wheel ...grind er cut straight accross the head of the screw then you can use a straight screw driver
I have done the same thing using a hacksaw and a thin bladed screw driver. Rocco's way is better and I am going to buy a grabit kit today.
hello I have a question maybe you will know the answer to. i have oil coming from my left breather bolt. oil level is fine an it still has a small bit coming out every time i ride any suggestions
What year? How many miles?
year 2000 about 10000 miles
if oil is 1/2 way on stick....With bike warmed up...Check with bike up right...I just don't see many bike with 10,000 miles with bad oil umbrella in your rocker box...Half way on oil stick...See how that works out....Let me know....Ride Safe..
Vice grips worked great, thanks my nigga
Yes it does. Thank you for your Sub.
Soldering iron on the screws helps.
Happy to help. Thank you for the tip and all your support shovelhead. Ride safe and have a great day.
Can you get the bolt back on when you drill it out
I would use new screws but you could straight cut it and use a standard screwdriver. but I like to just go to Home Depot buy some screws and start fresh use grab from Home Depot. Or the vice grips work well too. Hope this helps have a great day. Happy to Help. Any questions just ask. Thank you for watching and you sub Hayden. Let us know how this works out. Ride Safe and have a great day.
Cheers for your help, I eneded up taking it into a shop so I didn't break more stuff haha
@@mrfish9997 Ride Safe and have a great day..
Cheers you too, ride fast ride safe ;)
bro you're a fucking hero
Happy to help. I'm glad all worked out. Thank you for watching. And all your support Dave. Ride safe and have a great day. Got to love those sportsters.
When you can't find your easy outs and its already to late...reailty those are easy its the brass ones that will ruin your life
Happy to Help, Any questions just ask. Thank You for your Sub. Ride Safe and have a great day.
I swear Yamaha cheaped out on brass screws I own a 2005 v Star 650 for my first motorcycle everything else on it is perfect except the brass screws