Huge thanks to my *channel members* who make these videos possible. If you want to support what I do and get access to free project files, an awesome discord community, and much more, head over to *www.patreon.com/bytesizedengineering* or click the *join* button here on UA-cam.
Just one issue, as seen at @4:35 those black wire leads have too much insulation removed, either not in far enough or need trimming so that bare copper is not exposed.
Everyone on UA-cam talked about "the signal". I kept thinking it was 5V+, which of course didn't work at all. THANK YOU for the minor detail about it being COMMON or GROUND! NOW MY CIRCUIT WORKS!!!! Thanks again. Now subscribed and I will be back.
I saw about 5 videos on UA-cam about relays and understood nothing! But, this video helped me understand relays completely! It's so easy for me now! Thanks for all the info!
So humble... "I'm not claiming to be an expert in this topic [...] but I did work as an electritian and I do have a degree in electrical engineering". Dude, you're a PRO... lol
Thank you so much. There are a ton of videos, when you search for pi relay, that cover the "connecting it to the pi and writing code to control it" angle, but this (after tons of searching) is the first one that actually covered the other side of things.
“wire nuts” -> marrettes. Also the live wire and the neutral were really close together attached to the relay. Use heat-shrink tubing as a best practice.
It’s 2 years later. Your video was well done. And you could have complicated matters by following my advice. But keeping it simple was the right direction.
@@bytesizedengineering Can I control load of max 15 amps under 12 volt DC as along as it maintains the same output power rating?? Example Say, 20 Amp, under 12 v dc, power 240 watt as against the rated 10 Amp X 24 v of same 240 watt, or 15 amp, 12 volt....!!??? I'm really confused with these power and current. Awaiting clear concept. Thanks.
@@bytesizedengineering is it possible to connect the two relays in such a way that when powered the Normally open will close and the other one will open which is normally closed? What I am saying let us suppose we have two power connected to two relays from two different sources, How can they be connected or wired in such a way if possible that when one power is on the other one is off? Think about it , seems a good project if it can be done?
So i ordered the one with 4 relays, connected it to my centralised electric space heater, one is for a water pump and other 3 are for heaters, every heater is 8 KW, i was not sure how powerful these relays out so i used theme to activate and deactiate existing 40KW relays inside the heater, i used the rpi4 1gb bc it has a poe gigabit port, slapped in a 16GB U10 card, i brought the poe enabled gigabit cat6 cable to the heater, tempreture dial was already connected to the main home server, installed Pihole on that pi to and just ordered the case with a fan from aliexpress, i made a quick app (i am a java developer) and voila now i dont need to go down to the basement to turn on or of the heater, although on all of the pcs i have made a small java gui for that, i am planing to make my whole house smart using raspberry pis
You shouldnt have so much of the bare copper sitting out of the relay, if they only slightly touch all current will flow through the small surface area making it heat up and most likely cause a fire, and the circuit breaker will not trip to prevent it
Thanks for the video. Good stuff. One minor suggestion; ditch the music or turn it down. It is really distracting and got pretty annoying pretty quick.
Well done!! Excellent easy explanation, was looking forever for a simple explanation of using the SRD-05VDC-SL-C 1 relay module with a push button without arduino, was finally able to understand the input connection of the relay thanks to your explanation and video, thank you!!
If you want to control the power of higher voltage equipment like servers and even lights I like using an Intelligent APC (7800 or 7900) PDU over a network with fence_apc installed on a Linux device. That's for anyone who might actually have a need for that. That way you can use your GPIO pins for things like sensors, etc, etc.
Best explanation found so far. Any good reply would be appreciated for the following questions in regards to connections. For the load, or black wires, I presume the connections on the module for the current would enter on the NO, and feed the lamp through the COM. Or does it matter? So to properly connect the active magnet, I would presume COM would connect to DC-, while NO would go to IN on the module. I already connected 12V LED lights using relays and now trying to use this different type of relay for a closet light triggered by magnets. In the 12V schematics for LED strips, the NO on the module loops back to DC-, which becomes impossible with 120 volts. As for the exposed wires. If they would touch, then the module would be defeated and the lamp would stay on. The issue is that if they barely touch, arcing could happen and this is considered a very serious issue.
When handling your signal wire like shown @6:40 make sure you are isolated and have no connection to ground. Otherwise you will close the circuit by just touching the exposed part of the signal wire and potentially hurt yourself. I recommend to use a button on the breadboard to test your relay and not do what is shown in this video!
just got a 12V 2-Channel Relay Board Module Active Low unit; - just realized that I now need an ATX psu near it AND to knock up a wee module with a bit of tri-pad and two transistors (+resistors)...
Just to remind you, HIGH voltage is voltages above 999 volts. LOW voltage is 999 and below. Here in Sweden we also have something called "Klenspänning" which is a specific voltage below 50 volts which is suitable for toys because it's safer.
I have a question I would like to ask you..I certainly hope you will respond. Every one talk about relays and 12 volt or 5 volts DC current , but no one talks about AC current. ...Question: i have an eletric front door lock in my house..it is actually a patio metal door to the street. The intercom connected to it is about 40 meters away upstairs on the 3rd floor apt. I purchased a cheap kit. one phone one front door bell...It comes with the transfomer inside the phone unit. 110 AC to 12 volts AC, The 12 volt AC output has to travel the 40 meter span to the lock. It drops tension...and the lock fails to open..is erratic, sometimes it work and others dont...By the way the cable used is CAT5. i found out there are 2 ways of correcting this issue; 1) is to replace the cable with a twin pair gauge 16 for the lock ..and keep using cat5 for the bell communicator. 2) is to add a relay and another transformer near the door..Here is the tricky part.. the relays on the input part operate at 5 and 12 volts DC and can output 10A 125 volts AC..CORRECT ?? I need to basically design a circuit that would behave the way i want it.. So how you i go about doing this...Should I use one of those modules with a rectifier bridge so i can convert ac to Dc on the input side...and have the 12 volts AC on the out put side ??....Your ideas will be greatly appreciated..Thanks in advance....
As a student taking ECET, I HIGHLY recommend not to use a cord to connect to the lamp like in the video. Some of the copper wires could still be exposed and when touched can be very fatal. I suggest buying a GFCI outlet, then encasing the outlet and the relay in an outlet box.
Makes sense... btw what's the difference between fatal and very fatal? One kills you and the other? Is it like being pregnant and very pregnant? (just pulling your leg a bit...)
look at it from this angle - you can be pregnant with one fetus and you can be pregnant with 3 of them. then you are "very pregnant" , especially at later stages :)
I didnt understand this video very good, so what kind of relay do you need to use for a wired magnetic window switch, to turn off and on the air conditioner when window opens or closes. AC 3000w. Thank you, best regards
"I am an engineer. To save time let's just assume I am never wrong." I knew a Civil Engineer who insisted that 220 volts was the same as three phase. He absolutely INSISTED that he was right because he had a CE degree. Sometimes I wondered if he really did have a degree or if he lied about it.
In fairness, your experience as an electrician years ago is a far greater indication of your knowledge in this subject. My dad is an extraordinarily accomplished principal electrical engineer and probably the smartest person I know... but probably couldn't use a multimeter if his life depended on it
While impossible to predict,how someone will hear instructions, but at least one though you neat to connect the ends safety ground, and together when slicing that extention cord. When you meant to reconnect green to green, and reconnect white, white. I suggest eliminating the background music. Respectfully adds no value your production, and could interfere with your talk through. The only time I could hear the relay with you con controllin the tesk lamp. This would have been good place to inform your veiwers that low voltage conductors should be separated from the high voltage conductors, in a real world installation. BTW; this video found it's way to Facebook after someone link to it in a technical forum. I will subscribe, and keep an eye out for your follow up vids in your series.
It is quite clear that you know what you are talking about and your explanation was first rate. Unfortunately, your choice of background music was not pleasant. I hope you take this bit of criticism in the same spirit I am giving it. thanks.
I am not an electrician, but from what I understand you should never connect the ground and the neutral together except at the main service panel. The neutral has a returning current and if the ground is connected to the neutral the ground wire will be live too.
I wouldn't doubt that other people use relay boards exactly like this, but that being said, it's a much better idea to get a small extension cord for the relay, so you can apply a relay to whatever you want, and don't have to damage the product
I know only an idiot like me could interpret it in this way, but in the hope this comment helps someone. At 03:02 he says connect the ground and neutral wires together - and I know if you watch closely he shown ground to ground and neutral to neutral in the video but just for clarity he means ground to ground and neutral to neutral - not as could potentially be interpreted as connecting ground and neutral together!
Hi Zach, there is an issue that is worth exploring. It is cool to have a relay but if you have other people using the appliance can we have 2 switching options? This mean a person can either switch it on using the normal unmodified way and also an option to use a relay that is triggered by electronics. Otherwise it will be annoying to people who is standing next to the appliance who could just flip a normal switch but you will tell them to do some other routine 🤦🏻♂️
Yes you could easily do this by having a manual switch in parallel with a relay, however the manual switch would act as a relay override switch, the relay would not function again until the manual override switch had been turned off. A solution could be to use impulse/rocker switch connected to a latching relay
Thanks for the video , please tell which relay should be used for 15amp appliances like gizzer fridge, please give the detailed name of relay,, thank you
Hi Zach, how can I get one of those ‘I’m an engineer’ T-shirt’s like your wearing? I’m always saying that exact phrase to my wife, a T-shirt like yours would say it even better!
I have 1 of the 5dcv to 110 relays. I'm trying to create a Poe using Bluetooth. I was hoping that my signal lead would come from my BT signal as my connection is made to the BT Device?? Your saying ground is signal. So do you know a a way to make the relay activate from a BT receiver board?
I think that the extension cord shouldn't have been cut in half. the black wire only, this would have save you time to reconnect the other two at later point.
I have a two channel relay and i am using it with the arudino board for my project when i give a low signal the relay starts and when i give a high signal the realy turns off why is that so need help
since you have a 2 switch releay was safer to use both at L and N your never sure if the l is connected to the l on the board and the n at the n. safety always first. :)
Using the jumper cable on the breadboard. You connect the small cable when illumination is required. Note: If you have children I would recommend they ask an adult to make the connection(s) when needed (you may also provide a battery-powered torch nearby - affix torch to the lamp base using #18 twine,or similar).
Man, I did not understand it why the signal connector should be ground to get the relay activated? To activate the relay, shouldn't we apply 5 VDC to activate its coil? Your clarification is much appreciated... Thanks for your very helpful and useful training videos
There is usually a transistor that drives the coil. Depending on what type of transistor (N channel, P channel, NPN, PNP) will determine which logic level turns on the relay. This particular module has active low logic which means you ground the control signal to turn on the relay. Hope this helps!
Hi zach, I am Naren from India, I am an Electrical Engineering Student, I like your videos, Can you please do a DIY video about Solid State Relay and speed control of fan with SSR, Control over android app. I am inspired with your Home Automation videos and decided to do Home Automation as my Academic Project. Can you do it for me?
Would you be willing to share the STL for the enclosure? It looks like exactly what I need after watching your video! Great video btw. Your others are great too.
How do I modify a 12V 433MHz wireless remote control switch relay receiver and transmitter? Someone in the area (neighbor) is using the same frequency.
I want to control several 12v lighting circuits and I'm looking at multi channel relay boards. They all have only one power input. Does that put all my devices on one power supply, because you could get up to 10 amps pretty quickly!
The idea would be to connect something more than just a simple light with a simple switch. Like connect the relay to a blue tooth controller and you can control the light from your phone. You can build this for extremely cheap, or buy one for a lot more. You can modify this exact setup to control basically anything from pumps to LEDs. He is just showing how to do it. Not that this specific setup is useful at all.
looking at how he's wired this particular project, my thoughts would be that splitting the outer insulation off and not cutting the Neutral and Ground would save fatigue on the 2 wires in question because the bend would cause a weak point. safer to avoid that fatigue this way. the amount of exposed copper on the live wires in the relay terminals did make me cringe though
Yes you can, just replace the live wire on the extension cord with the live wire on the lamp cord. This was designed to save you from ruining the cord though. That and you could potentially put a snazzy box around it.
f you can please solve this problem. i have a toy. at the time of starting o or opening it flash light 3 time. now, my ask is. how to get that 3 or 4 or 5 time flash? i want to make a thing where i need that system.
hi sir, normally the refrigerator draws 6A amps to 9A so will it be safe to use this relay if the device draws maximum of 9A given that relay has a rating of 10A.
Great video! Do you have a video on how to use a relay to open/close an electric DC 12V valve? I assume you need a two-channel relay to set the reverse polarity? Thanks again for the video
Will this same process work to turn off a dehumidifier should a little giant condensation pump fail? I’m assuming a larger relay would be needed, but the process would be the same?
Can I control load of max 15 amps under 12 volt DC as along as it maintains the same output power rating?? Example Say, 20 Amp, under 12 v dc, power 240 watt as against the rated 10 Amp X 24 v of same 240 watt, or 15 amp, 12 volt....!!??? I'm really confused with these power and current. Awaiting clear concept. Thanks.
I have a power supply for the DC motor on my Sherline miniature lathe with a relay like this. I overloaded the motor the other day turning some difficult material, and it shut down the power supply. It happened a couple more times, before I could get finished with the piece, and now the motor doesn't run. I could hear a relay click when this happened, and thought it was a circuit breaker in the power supply. Now, I have it open, and can't find a circuit breaker. I do find a Songle SRD-05vdc-SL-C relay. It is obviously not clicking, as it should. I've read about relays with overload protection, but it doesn't appear this is such a relay. Could it still have functioned as an overload? And could it have died in my 'adventures'? Thanks, for any help. I know enough to get me in over my head, but not enough to dig myself out. GeoD
In this configuration it doesn't really matter. Since the wall wire is the one we're switching, I would connect that to common, and the lamp to normally open. It will work just fine if you have them the other way.
Huge thanks to my *channel members* who make these videos possible. If you want to support what I do and get access to free project files, an awesome discord community, and much more, head over to *www.patreon.com/bytesizedengineering* or click the *join* button here on UA-cam.
Just one issue, as seen at @4:35 those black wire leads have too much insulation removed, either not in far enough or need trimming so that bare copper is not exposed.
Everyone on UA-cam talked about "the signal". I kept thinking it was 5V+, which of course didn't work at all. THANK YOU for the minor detail about it being COMMON or GROUND! NOW MY CIRCUIT WORKS!!!! Thanks again. Now subscribed and I will be back.
I saw about 5 videos on UA-cam about relays and understood nothing! But, this video helped me understand relays completely! It's so easy for me now! Thanks for all the info!
The Reviewologists should have watched greatscott’s video
Exactly!
Watch this then : ua-cam.com/video/uniaiJmSch0/v-deo.html
So humble... "I'm not claiming to be an expert in this topic [...] but I did work as an electritian and I do have a degree in electrical engineering". Dude, you're a PRO... lol
Victor Fernandez did
He's not very professional for being a pro he has stripped way too much wire going into the relay leaving high voltage exposed ...
Being a electrical engineer and a electrician are different fields. Smart people though
Thank you so much. There are a ton of videos, when you search for pi relay, that cover the "connecting it to the pi and writing code to control it" angle, but this (after tons of searching) is the first one that actually covered the other side of things.
“wire nuts” -> marrettes. Also the live wire and the neutral were really close together attached to the relay. Use heat-shrink tubing as a best practice.
ME? - I JUST USE GUM!!! :P
maybe do it properly with wire bootlaces. The way you have shown is just not safe.
It’s 2 years later. Your video was well done. And you could have complicated matters by following my advice. But keeping it simple was the right direction.
Awesome video man. Thank you so much. Taking your time to explain to this level of detail is highly appreciated.
Thank you! And Thank you for taking the time to comment!
@@bytesizedengineering Can I control load of max 15 amps under 12 volt DC as along as it maintains the same output power rating?? Example Say, 20 Amp, under 12 v dc, power 240 watt as against the rated 10 Amp X 24 v of same 240 watt, or 15 amp, 12 volt....!!??? I'm really confused with these power and current. Awaiting clear concept. Thanks.
The world's best teacher
That is way too generous, but thank you
This video is probably the best explanation you can find on UA-cam. Clear and straight forward. Million likes!!
Thank you! That means a lot! I appreciate your feedback!
@@bytesizedengineering is it possible to connect the two relays in such a way that when powered the Normally open will close and the other one will open which is normally closed? What I am saying let us suppose we have two power connected to two relays from two different sources, How can they be connected or wired in such a way if possible that when one power is on the other one is off? Think about it , seems a good project if it can be done?
So i ordered the one with 4 relays, connected it to my centralised electric space heater, one is for a water pump and other 3 are for heaters, every heater is 8 KW, i was not sure how powerful these relays out so i used theme to activate and deactiate existing 40KW relays inside the heater, i used the rpi4 1gb bc it has a poe gigabit port, slapped in a 16GB U10 card, i brought the poe enabled gigabit cat6 cable to the heater, tempreture dial was already connected to the main home server, installed Pihole on that pi to and just ordered the case with a fan from aliexpress, i made a quick app (i am a java developer) and voila now i dont need to go down to the basement to turn on or of the heater, although on all of the pcs i have made a small java gui for that, i am planing to make my whole house smart using raspberry pis
You shouldnt have so much of the bare copper sitting out of the relay, if they only slightly touch all current will flow through the small surface area making it heat up and most likely cause a fire, and the circuit breaker will not trip to prevent it
exactly my thought!
@@therealb888 ^
4:38 in case somebody is wondering. but yeah, that is super dangerous!!
@@gene_Code ur the man!
Good lord yes XD literally the worst thing to show people that exposed copper is okay!
Thanks for the video. Good stuff. One minor suggestion; ditch the music or turn it down. It is really distracting and got pretty annoying pretty quick.
Thanks for the feedback! I'm still learning how to make/edit these videos.
Well done!! Excellent easy explanation, was looking forever for a simple explanation of using the SRD-05VDC-SL-C 1 relay module with a push button without arduino, was finally able to understand the input connection of the relay thanks to your explanation and video, thank you!!
I love the way you explained everything. The cameras were perfect. If you ever have time to do the same with your auto switch, that would be awesome.
Thank you, I was looking for information on how to connect the AC side of the relay, and you covered it perfectly.
Great video! How do you make the 5-volt source in your box?
A really good video here. Very clear and easy to understand.
Thanks +Antonia Warren
Thank you so much! You’re a great teacher wish I could have you for ever question
Thanks for watching! Good luck!
If you want to control the power of higher voltage equipment like servers and even lights I like using an Intelligent APC (7800 or 7900) PDU over a network with fence_apc installed on a Linux device. That's for anyone who might actually have a need for that. That way you can use your GPIO pins for things like sensors, etc, etc.
Best explanation found so far. Any good reply would be appreciated for the following questions in regards to connections.
For the load, or black wires, I presume the connections on the module for the current would enter on the NO, and feed the lamp through the COM. Or does it matter?
So to properly connect the active magnet, I would presume COM would connect to DC-, while NO would go to IN on the module.
I already connected 12V LED lights using relays and now trying to use this different type of relay for a closet light triggered by magnets.
In the 12V schematics for LED strips, the NO on the module loops back to DC-, which becomes impossible with 120 volts.
As for the exposed wires. If they would touch, then the module would be defeated and the lamp would stay on. The issue is that if they barely touch, arcing could happen and this is considered a very serious issue.
God I love the outdoor scenes haha. Thanks for making an awesome video
Yeah, I get tired of filming indoors. I think it's more interesting to watch a video shot in different places. Thanks for watching!
Clear to understand. Great compared with many others.
Good explanation, easy to understand. Thanks
Thanks for the video. I have an emylo relay, but I was afraid to hook up 120v to the small terminals. I'm good to go now. Thanks again!
When handling your signal wire like shown @6:40 make sure you are isolated and have no connection to ground. Otherwise you will close the circuit by just touching the exposed part of the signal wire and potentially hurt yourself.
I recommend to use a button on the breadboard to test your relay and not do what is shown in this video!
just got a 12V 2-Channel Relay Board Module Active Low unit; - just realized that I now need an ATX psu near it AND to knock up a wee module with a bit of tri-pad and two transistors (+resistors)...
Sounds cool! Good luck!
Just to remind you, HIGH voltage is voltages above 999 volts. LOW voltage is 999 and below. Here in Sweden we also have something called "Klenspänning" which is a specific voltage below 50 volts which is suitable for toys because it's safer.
Nice. For me high voltage is anything I'm afraid of touching for fear of getting zapped!
@@bytesizedengineering hahah good answer! It's a correct way to treat electricity
Triacs are another solution to home automation and controlling AC loads
There’s SSR too!
THX, just working with a 2 realy module and I was doing something wrong, you told me what :D
Great video, cheers mate! Also, 10amps seems *plenty* for a fridge :-)
My 6' tall Bosch fridge is 90W, which at the 220V we have here, and with P=VI, is half an amp.
Yup. Mind you, I can’t see why you would want to turn off the fridge with a switch, sensor, wifi etc 🤔
I have a question I would like to ask you..I certainly hope you will respond. Every one talk about relays and 12 volt or 5 volts DC current , but no one talks about AC current. ...Question: i have an eletric front door lock in my house..it is actually a patio metal door to the street. The intercom connected to it is about 40 meters away upstairs on the 3rd floor apt. I purchased a cheap kit. one phone one front door bell...It comes with the transfomer inside the phone unit. 110 AC to 12 volts AC, The 12 volt AC output has to travel the 40 meter span to the lock. It drops tension...and the lock fails to open..is erratic, sometimes it work and others dont...By the way the cable used is CAT5. i found out there are 2 ways of correcting this issue; 1) is to replace the cable with a twin pair gauge 16 for the lock ..and keep using cat5 for the bell communicator. 2) is to add a relay and another transformer near the door..Here is the tricky part.. the relays on the input part operate at 5 and 12 volts DC and can output 10A 125 volts AC..CORRECT ?? I need to basically design a circuit that would behave the way i want it.. So how you i go about doing this...Should I use one of those modules with a rectifier bridge so i can convert ac to Dc on the input side...and have the 12 volts AC on the out put side ??....Your ideas will be greatly appreciated..Thanks in advance....
This video is ok but your t-shirt is the best!
As a student taking ECET, I HIGHLY recommend not to use a cord to connect to the lamp like in the video. Some of the copper wires could still be exposed and when touched can be very fatal. I suggest buying a GFCI outlet, then encasing the outlet and the relay in an outlet box.
Thanks for the tips!
Makes sense... btw what's the difference between fatal and very fatal? One kills you and the other? Is it like being pregnant and very pregnant? (just pulling your leg a bit...)
look at it from this angle - you can be pregnant with one fetus and you can be pregnant with 3 of them. then you are "very pregnant" , especially at later stages :)
@@mmca2 lol
I didnt understand this video very good, so what kind of relay do you need to use for a wired magnetic window switch, to turn off and on the air conditioner when window opens or closes. AC 3000w. Thank you, best regards
Awesome tip and clear tutorial. Thank you.
Thank you! I’ve just found your Chanel and I’m ready to learn more from you.
Very organized and well-presented information. Very useful. Great job!
"I am an engineer. To save time let's just assume I am never wrong."
I knew a Civil Engineer who insisted that 220 volts was the same as three phase.
He absolutely INSISTED that he was right because he had a CE degree.
Sometimes I wondered if he really did have a degree or if he lied about it.
Engineers are wrong all the time! Myself included!
In fairness, your experience as an electrician years ago is a far greater indication of your knowledge in this subject. My dad is an extraordinarily accomplished principal electrical engineer and probably the smartest person I know... but probably couldn't use a multimeter if his life depended on it
While impossible to predict,how someone will hear instructions, but at least one though you neat to connect the ends safety ground, and together when slicing that extention cord. When you meant to reconnect green to green, and reconnect white, white. I suggest eliminating the background music. Respectfully adds no value your production, and could interfere with your talk through. The only time I could hear the relay with you con controllin the tesk lamp. This would have been good place to inform your veiwers that low voltage conductors should be separated from the high voltage conductors, in a real world installation. BTW; this video found it's way to Facebook after someone link to it in a technical forum. I will subscribe, and keep an eye out for your follow up vids in your series.
very detailed info, thasnks a lot! this is what i was searching
It is quite clear that you know what you are talking about and your explanation was first rate. Unfortunately, your choice of background music was not pleasant. I hope you take this bit of criticism in the same spirit I am giving it. thanks.
Thanks for the feedback.
thank you sir i was able to successfully make a relay switch that powers a space heater and a humidifier.
Glad to hear!
Very clear explanation! Thank you!
I am not an electrician, but from what I understand you should never connect the ground and the neutral together except at the main service panel. The neutral has a returning current and if the ground is connected to the neutral the ground wire will be live too.
Great explanation and also showing.. well done
Sir can u help me to complete my fun home project please the topic is very relevant to your understandings and expertise
I wouldn't doubt that other people use relay boards exactly like this, but that being said, it's a much better idea to get a small extension cord for the relay, so you can apply a relay to whatever you want, and don't have to damage the product
Did you watch this video? I show how myself using a short extension cord for those exact reasons.
I know only an idiot like me could interpret it in this way, but in the hope this comment helps someone. At 03:02 he says connect the ground and neutral wires together - and I know if you watch closely he shown ground to ground and neutral to neutral in the video but just for clarity he means ground to ground and neutral to neutral - not as could potentially be interpreted as connecting ground and neutral together!
thank you very much. very carefully explanation
I will recommend using wire ferrules on the end of wires. be safe and happy when u r playing with high voltage
Thanks for the feedback
Hi Zach, there is an issue that is worth exploring. It is cool to have a relay but if you have other people using the appliance can we have 2 switching options? This mean a person can either switch it on using the normal unmodified way and also an option to use a relay that is triggered by electronics. Otherwise it will be annoying to people who is standing next to the appliance who could just flip a normal switch but you will tell them to do some other routine 🤦🏻♂️
Yes you could easily do this by having a manual switch in parallel with a relay, however the manual switch would act as a relay override switch, the relay would not function again until the manual override switch had been turned off. A solution could be to use impulse/rocker switch connected to a latching relay
This video helped me clearly to understand about relays. Thank you bro...I like this video.So,Shared,Subscribed&Notifications bell allowed.
Very humble with that t-shirt
Thank you. Exactly what I was going to do to test my design - now I don't have to!
Thanks for watching
Very nicely explained
Thanks for the video , please tell which relay should be used for 15amp appliances like gizzer fridge, please give the detailed name of relay,, thank you
This was a great job. Don't mind the nitpickers. I'm not an engineer but we both know other engineers can't help but bitch and complain...haha
Thanks Kimchi Sammich! (Now I'm just hungry)
Hi Zach, how can I get one of those ‘I’m an engineer’ T-shirt’s like your wearing? I’m always saying that exact phrase to my wife, a T-shirt like yours would say it even better!
I'm not sure. My sister got it for me when I graduated from school
I have 1 of the 5dcv to 110 relays. I'm trying to create a Poe using Bluetooth. I was hoping that my signal lead would come from my BT signal as my connection is made to the BT Device?? Your saying ground is signal. So do you know a a way to make the relay activate from a BT receiver board?
I think that the extension cord shouldn't have been cut in half. the black wire only, this would have save you time to reconnect the other two at later point.
Typical safety factor should be 3:1 or 5:1 so a relay rated at 10 amps should only pull 2 amps
I have a two channel relay and i am using it with the arudino board for my project when i give a low signal the relay starts and when i give a high signal the realy turns off why is that so need help
LOL I love your shirt!
Thank you for your video
I have one qustion please
why you didn't connected the signal to the positive 5 volt?
"I don't claim to be an expert, but the only people better at this stuff than I am have PhDs...."
Very nice video, helped a lot!
since you have a 2 switch releay was safer to use both at L and N your never sure if the l is connected to the l on the board and the n at the n. safety always first. :)
Please share the link in which you electronically activate the relay
Im confuse how do you control it then ? Do you have to keep turning it on manually?
Using the jumper cable on the breadboard. You connect the small cable when illumination is required. Note: If you have children I would recommend they ask an adult to make the connection(s) when needed (you may also provide a battery-powered torch nearby - affix torch to the lamp base using #18 twine,or similar).
Man, I did not understand it why the signal connector should be ground to get the relay activated? To activate the relay, shouldn't we apply 5 VDC to activate its coil? Your clarification is much appreciated... Thanks for your very helpful and useful training videos
There is usually a transistor that drives the coil. Depending on what type of transistor (N channel, P channel, NPN, PNP) will determine which logic level turns on the relay. This particular module has active low logic which means you ground the control signal to turn on the relay. Hope this helps!
How schematic will be look like if I still want control light by switch and relay?
D video is amzing and very informative..
And easy to understand
Well done brotha!👍👌
Thanks for watching!
Good sharing.ty
I have a question. Why cut the other two cables if we were going to reconnect them regardless?
If you split the signal wire and place them in the twee middle pins. Would that switch both relays at the same time?
Hi zach, I am Naren from India, I am an Electrical Engineering Student, I like your videos, Can you please do a DIY video about Solid State Relay and speed control of fan with SSR, Control over android app. I am inspired with your Home Automation videos and decided to do Home Automation as my Academic Project. Can you do it for me?
Thanks for watching! I have my list of projects that I work from. Thanks for the suggestions and good luck with your projects!
Why do you connect neutral and ground together?
Would you be willing to share the STL for the enclosure? It looks like exactly what I need after watching your video! Great video btw. Your others are great too.
Good video, very informative!
Brecht Dhuyvetters thanks! I appreciate your feedback!
Hi
I've got a question when you connect the 2 black wires why don't you use the other port.
And what the other port for
Sorry I'm new to this
How do I modify a 12V 433MHz wireless remote control switch relay receiver and transmitter? Someone in the area (neighbor) is using the same frequency.
I'm not sure I can help. Sorry.
Really nice T man
I mean T shirt man .....
Thanks
I want to control several 12v lighting circuits and I'm looking at multi channel relay boards. They all have only one power input. Does that put all my devices on one power supply, because you could get up to 10 amps pretty quickly!
I need your help regarding relay. I want to rotate motor one cycle clock wise and one cycle anti clockwise. Yousing 24 volt/4amps adaptor.
Why not just avoid cutting the ground and neutral wires in the first place?
Hmm good point.
lol ikr
The idea would be to connect something more than just a simple light with a simple switch. Like connect the relay to a blue tooth controller and you can control the light from your phone. You can build this for extremely cheap, or buy one for a lot more. You can modify this exact setup to control basically anything from pumps to LEDs. He is just showing how to do it. Not that this specific setup is useful at all.
So.. Black is live there?
looking at how he's wired this particular project, my thoughts would be that splitting the outer insulation off and not cutting the Neutral and Ground would save fatigue on the 2 wires in question because the bend would cause a weak point. safer to avoid that fatigue this way. the amount of exposed copper on the live wires in the relay terminals did make me cringe though
Could you add the relay directly to the lamp (cut the lamp cord and add that to your relay)?
Yes you can, just replace the live wire on the extension cord with the live wire on the lamp cord. This was designed to save you from ruining the cord though. That and you could potentially put a snazzy box around it.
f you can please solve this problem.
i have a toy. at the time of starting o or opening it flash light 3 time.
now, my ask is. how to get that 3 or 4 or 5 time flash? i want to make a thing where i need that system.
Great job... nicely done
Thanks for taking the time to comment!
hi sir, normally the refrigerator draws 6A amps to 9A so will it be safe to use this relay if the device draws maximum of 9A given that relay has a rating of 10A.
That's pushing it too close. They make relays rated for much higher current.
Great video! Do you have a video on how to use a relay to open/close an electric DC 12V valve? I assume you need a two-channel relay to set the reverse polarity? Thanks again for the video
A solinoid is usually used in irrigation
Will this same process work to turn off a dehumidifier should a little giant condensation pump fail? I’m assuming a larger relay would be needed, but the process would be the same?
Very useful
Can I control load of max 15 amps under 12 volt DC as along as it maintains the same output power rating?? Example Say, 20 Amp, under 12 v dc, power 240 watt as against the rated 10 Amp X 24 v of same 240 watt, or 15 amp, 12 volt....!!??? I'm really confused with these power and current. Awaiting clear concept. Thanks.
I would read the datasheet of the relay you have. If you don't have the datasheet find something similar on Digi-Key and read through the datasheet.
Hi, what kind of switch can you use for signal? Push button switch works?
I have a power supply for the DC motor on my Sherline miniature lathe with a relay like this. I overloaded the motor the other day turning some difficult material, and it shut down the power supply.
It happened a couple more times, before I could get finished with the piece, and now the motor doesn't run.
I could hear a relay click when this happened, and thought it was a circuit breaker in the power supply. Now, I have it open, and can't find a circuit breaker. I do find a Songle SRD-05vdc-SL-C relay.
It is obviously not clicking, as it should. I've read about relays with overload protection, but it doesn't appear this is such a relay. Could it still have functioned as an overload? And could it have died in my 'adventures'?
Thanks, for any help. I know enough to get me in over my head, but not enough to dig myself out.
GeoD
Hello , this vedio was very helpful , thank you. However what is the equipment connected to lower end ofyour breadboard?
I think you're asking about the breadboard power supply.
Nice, I love it i can really understand Thank You! I will sure subscribe
Which end of black wires connected to the common and normally open terminal. The one to the wall is normally open and to the lamp is common? Thank you
In this configuration it doesn't really matter. Since the wall wire is the one we're switching, I would connect that to common, and the lamp to normally open. It will work just fine if you have them the other way.
I really wonder if it replace 110acv with 12dcv battery then is it possible to control 12volt electronic devices?