You have to wiggle it around, my advice is to start to pull on near the blinker once you pulled the lip above the bumper, then tock it around while pulling it around and watch for the tip of the fender, if you scratch your headlight there it's not gonna be visible, but I'm afraid we can break the acrylic. Make sure you disconnect the connector once you can fit your hand between the fender and the headlight. If you are forcing on it, stop and rock it around a bit.
You should be careful changing halogen to LED bulbs is illegal in the uk and if the MOT inspector spots it he will fail you (unless you bought a new headlamp unit). Also, the bulbs he used in the video are not road legal in the UK either!
@@gymweeb9229 Fair enough I just assumed cause the tutorial is for the halogen unit. I just wanted to be helpful to a fellow polo owner because these mistakes can happen.
Hey just a question. In Denmark i cant fit led light into a halogen fitting. Thats illegal -.- But ive found some nice cool halogen, the philips ones as well. Do you know if the high beam function is built into the bulb? Or is that a different bulb?
Awesome video, I would also love a video o how to remove the fog incase of a repair. My fog light has water damage and I would like to replace it but I can't seem to find any video on how to remove the whole fog light.
Cheers mate! Saw this and saved 250 quid. The bulbs are changed in less than 10 minutes for both sides.
Cheers mate, seen on a forum that you had to take the bumper off. This was much easier, got it done quite quickly thanks to you!
Glad it helped
Beside the wind it’s a good video mate. Would have been perfect if you showed us how you removed the actual bulb.
You have to wiggle it around, my advice is to start to pull on near the blinker once you pulled the lip above the bumper, then tock it around while pulling it around and watch for the tip of the fender, if you scratch your headlight there it's not gonna be visible, but I'm afraid we can break the acrylic.
Make sure you disconnect the connector once you can fit your hand between the fender and the headlight.
If you are forcing on it, stop and rock it around a bit.
Guessing I need to buy 4 to do normal and high beam on my 2019 polo ?
I have the same question. Did you figured it out?
@@CarloAnardu did you figure this out? Wondering the same thing lol.
Thank you bro for the education
nice, couldn't figured out how to release the bulk, thanks for the info, all good now
Would I need to buy 4 bulbs because there is separate bulbs for the main beam ?
Yh the same type
Very helpful video! How did you enable comfort lights when you unlocked the car? I want this on mine, thanks
If you keep your lights on “auto” it should do it on its own.
is it H7 for both bulbs - as one is for main beam?
Thank you
But I have a question
H7 or H4 ? Which one is better? For mk6 polo
H7
Thanks so much for posting this video, so easy and very helpful.
Hi I see this bulb is 5000K from Philips. If I was to get a different company bulb would it be less whiter even though it’s 5000K?
Are these legal?
Do you know what diameter the dust cover for the dipped beam is?
Hi Andreas
No, unfortunately we don't have that information. I would suggest maybe having a dig through forums.
Kind regards,
Advanced In-Car Team
Hey thanks for the video! I used it to change my lights in the full led ones.
Do you know by chance also how to swap the bulbs for the fog lights?
You should be careful changing halogen to LED bulbs is illegal in the uk and if the MOT inspector spots it he will fail you (unless you bought a new headlamp unit). Also, the bulbs he used in the video are not road legal in the UK either!
@@xelahn6916 first if all im not from the uk…
Second I highly doubt this since I literally have the vw oem led headlights…
@@gymweeb9229 Fair enough I just assumed cause the tutorial is for the halogen unit. I just wanted to be helpful to a fellow polo owner because these mistakes can happen.
@@xelahn6916 ah got you. My bad, thanks for the care
any error codes after installing bulbs?
You are a brilliant tech mate. Thank you.
No problem 👍
Hey just a question. In Denmark i cant fit led light into a halogen fitting. Thats illegal -.- But ive found some nice cool halogen, the philips ones as well. Do you know if the high beam function is built into the bulb? Or is that a different bulb?
Yes it’s a different bulb on the Polo AW.
Thanx for video mate ...
Nextime pls make a video on how to insert fog lights on a trendlindline 1.0
Do you mean a video on how to upgrade the bulbs in the already fitted Fog Lights?
Awesome video, I would also love a video o how to remove the fog incase of a repair. My fog light has water damage and I would like to replace it but I can't seem to find any video on how to remove the whole fog light.
If I ever decide to change the Fog Lights I will try and do a video.
What exact bulb is this please?
It's H7 for low beam in this model
Thank you!
What are all the bulb sizes in the front light?
H7
Bit windy. Its making it hard to hear som parts
Sorry dude! It was over lockdown this year and was at home without my normal equipment!
Some man cheers
The video is very clear and great👍
Thank you 👍
Not showing video of difficult bits, why stop filming?
Because you need both hands to do the difficult bits :D
@@tylerdurdenzesudetThen buy a tripod if you are going to make a ‘how to’ video.
You’re not actually showing us
Absolutely ridiculous. Swooshed over the bits we needed to see. Pointless video.
Your microphone gets blocked out, poor video.
I just did the Bang and you need to Bang … Bang … prrrp Bang and there you go. Show the f how you change it 😂