Repairing IGBT Welding Machine MMA 250 Preventive Maintenance
Вставка
- Опубліковано 14 жов 2024
- Repairing IGBT Welding Machine MMA 250 Preventive Maintenance
bit.ly/3NUM74Y
------------------------------------
IGBT Welding Machine Repair Hindi
MOSFET Welding Machine Repair
IGBT vs Mosfet welding machine Tamil
IGBT voltage regulator circuit
how to make an IGBT welding machine
preventive maintenance Welding Machine
preventive and breakdown maintenance for Welding Machine
electrical preventive maintenance checklist
preventive maintenance of Welding Machine
preventive maintenance of Welder
dg preventive maintenance
total preventive maintenance (tpm)
preventive and corrective maintenance
how to make preventive maintenance schedule
preventive maintenance Welding Machine repair
preventive maintenance in Welding Machine industry
preventive maintenance of pc
sap pm preventive maintenance
preventive and predictive maintenance Welding Machine
preventive maintenance Welding Machine
what is preventive maintenance Welding Machine
Welding Machine preventive maintenance schedule
Welding Machine preventive maintenance checklist
Welding Machine preventive maintenance
Welding Machine breakdown maintenance and preventive maintenance
planned preventive maintenance (ppm)
preventive maintenance Welding Machine
preventive maintenance in sap pm
------------------------------------
Here are some tips for maintaining an IGBT MMA 250 welder:
Check the consumables: Before and after use, check the torch consumables for damage and obstructions. Replace any damaged or worn consumables before using the machine.
Check the cables and hoses: Every three months, check the weld cables and gas hoses for damage, cracks, or wear. Replace any damaged parts.
Clean the terminals: Clean and tighten the weld terminals.
Remove debris: Use filtered compressed air to remove debris from the MIG gun liner.
Clean the machine: Regularly clean the arc welding machine to remove dust, debris, and grime.
Check the wire feeder and drive rolls: Every three to four months, check and clean the wire feeder and drive rolls. Replace them if necessary.
Check the inlet and outlet guides: Inspect and clean the inlet and outlet guides. Replace them if necessary.
Service the welding gun and liner assembly: Arrange for a technician to service the welding gun and liner assembly at least once a year.
Check the wire feeding: Check if the wire is feeding properly. A worn drive roller can affect how the wire is fed and may cause it to slip. To detect a worn drive roller, look for any debris or dirt on the liner.
You can also try these tips for proper maintenance:
Connect the machine to a properly grounded electrical outlet.
Use a soft, non-abrasive cloth to wipe away dust and debris from your welding machine at the end of the day, or at least once a week.
Important Safety Reminders:
Always disconnect the power before working on the machine.
Wear appropriate safety gear, including eye protection and gloves.
Consult qualified professionals if you're not comfortable with electrical work.
Test the upgraded machine thoroughly before using it for actual welding tasks.
-------------------------------------
If your machine is still faulty, you can try getting an authorized technician to repair it.
Asif Welding Inverter Repairing Workshop 03335617483
Remember that working with welding equipment can be dangerous, so always prioritize safety and take appropriate precautions. If you are not comfortable troubleshooting the inverter yourself, it is best to seek professional assistance to avoid any risks or further damage.
-------------------------------------
Tips, I hope helpful for you 📽-
( All credits are reserved for their respective owners )
Follow Like Share and Comment
Turn Post Notification On
Follow us for more Informative pictures!
-----------------------------------------
Welcome to our ETech47, where we explore the fascinating world of science, technology, and the universe!
Get ready for a journey that's both educational and entertaining!
For Video Editing services: Contact us
03335615424
👇👇👇👇👇👇👇👇
Disclaimer Fair Use:
1. The videos have no negative impact on the original works.
2. The videos we make are used for educational purposes.
3. The videos are transformative in nature.
4. We use only the audio component and tiny pieces of video footage, only if it's necessary.
Copyright Disclaimer Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. Fair use is permitted by copyright statutes that might otherwise be infringing.
👇👇👇👇👇
For Business inquiries:
Support, Share & Subscribe
Follow me on Instagram: / techpostpak
Facebook: / etech47
/ rayan_seo
"Thank you for watching"
Allah Hafiz
Bhai aap dead card me components chek karne ke bad kya kharab h ye bataya kare or kis component ko kis trah se chek karnan h kitne volt chek karne h ye bataye
Ok its good suggestion, i will try my best.
Actually, during video recording i m explaining the whole activity because One hand working & 2nd holding camera.
InshAllah improvement will come timely.
सर सीगल कार्ड 200 ऐ मसीन मे डराईव वोल्टेज 8 है ऐसी डराईव मे सारे रजीस्टर केपेसीटर ऐल ईडी सब नये डालने के बाद भी 1 टच मे आईजी बीटी सोर्ट होजाते है पलीज मदद करे
Please check its chopper transformer that is installed in drive and one more action you must change its comparator ic it may be LM358 or 3140.