Marantec garage remote reset programming & review
Вставка
- Опубліковано 4 вер 2024
- reviewing this brand of marantec garage door opener model 4500. if your renting out homes, do yourself a favor and spend more on a better unit, instead of paying a maintenance person or repair personnel to keep on having to come out and keep fixing it.
here I show how to cycle through the programming system and reset the remote when it stops working.
You can only program one remote through this method (as shown in video). To program any additional remotes, you will need to use the pin method. There's other videos on UA-cam that show that.
The purpose of this video is to show others, that are having problems with their garage, what the problem is, so they don't get lost trying to figure it out. If it's not the safety sensors that stop the garage when something is in the way, then it's most likely just this common issue. Just reset the garage signal.
Also, for some reason, some garages may stop working with the remote if the switch on the wall is pressed (maybe a logic board fault?). If you only use the remote, and never use the wall switch to open and close the garage, then you won't have to keep doing this over and over. Also, holding the wall switch button down works better than just pressing it quickly.
Please leave a like and a comment if you find this helpful or useful. Thank you.
If you still don't get it, here's another video that's better hopefully:
• Marantec garage remote...
Made with Adobe Premiere Clip. Make your own clip at premiereclip.a...
This was perfect! My kid lost the remote shortly after buying the house... 5 years ago. Now having a remote is awesome! The instructions that came with it only covered copying the code from another remote not starting with no remote.
Glad this video helped!
Mjl
For the second remote, once you have once programmed, you need to use the 3-pin connector that came with the unit and share the code. That's how you program multiple remotes without removing the codes from the others. It's dumb, but it works. You should not have to ever go back to reprogram this method unless you have a surge or something that cuases the unit to reset.
Your instruction is great. I viewed yours instructions once and it help me get it done with my. I give your instruction a plus
Thank you!
Question. My wife's truck was broken into and her remote as well as her living info was stolen. I've not be able to see if this garage opener allows changing the code.
I tried everything u said but at number 7 when i press my remote button the light doesn't rapidly flash wat should i do
I'm having this same issue, did you ever solve it? It seems the garage opener is not receiving the signal from the transmitter.
Any success? I’m having the same issue
Same here. Anyone have a solution??
I just moved in to a new home and have only one remote (and no connector tool). Is there a way you know of to reprogram it so that if there are other remotes out there, they can't be used on my door? If I program the remote I have as shown on this video, does it get a new code each time - overwriting the old code? Thank you!
Did u get an solution?
@@sorenzeen no I didn’t. I think if I reprogram, the other remotes out there wouldn’t work anymore -but no way to test it for sure since we have only 1 remote.
If you reprogram it and have your new remote working then it deletes the other remotes.
My garage door opens manually but the lead 8 won’t turn on so I can program the remote. Any idea why? Thanks!
Thanks for sharing 😂😂😂
useful remote
i have one i need to replace. which new motor is compatible? like plug and play almost?
Did you ever find one ??
@@nuimproves6906 no just replaced the whole thing
So you have several negative videos on this opener. Um, did it ever occur to you that you just might have a bad unit or there was a problem with installation?
How would I find out?
Surely multiple units can't all be bad units?
How to you program the wall remote for another new 4 number code?
Let me know if you find out thanks
@@woden925 I found out but it still didn’t work. Suppose to hit 0 then punch in your old 4 numbers followed by your new number.
On mine the light blinks when open its really annoying. There's a way to program it but after a week it blinks again. Do you know how to fix this. On the wiring there are numbers whoever installed it only connected the first 4 and cut the rest i don't know if thats the problem
It sounds like the sensor needs to be aligned. Have you checked the safety sensors that Keep the door from closing if something is blocking the doorway?
-SMP- scientific method perspective i saw that on a different video and checked it. On yours are all the wire connectors used or just the first 4
@@UgaFan-ie8cd which wires are you talking about?
-SMP- scientific method perspective the incoming wires right by the circle of lights. Also the 6th light blinks as well if that means anything
@@UgaFan-ie8cd ua-cam.com/video/_5DtOQnzhyM/v-deo.html
Were you able to successfully program two remotes? Every time i try to program a second, the first one stops working
Yes, there is a connector that you use to plug the first programmed remote into the second. If you try to program the second remote directly to the garage, then it will take the place of the first. In other words, whatever remote is remotely programmed directly to the garage will be the main remote. Any additional remote must be programmed to the main remote by a pin that let's the remotes plug into each other. I'm pretty sure you can buy the connector online for cheap. It's just a metal pin plug basically.
@@-smp-scientificmethodpersp838 i have the same issue! But my remotes dont blink when i try transferring. How do i put a new signal into a remote that isnt new?
@@lastnametea your remote isn't supposed to blink. The garage door opener does. Maybe you need a new battery? Or did you drop it in water or something? These remotes are pretty durable. I'm not sure what you're trying to do, or how you diagnosed it as a signal maker/ receiver
Liebe Freunde, sagen Sie mir, wie man eine andere blinkt, wenn Sie die ursprüngliche Fernbedienung verlieren, und wie man die alte zurücksetzt. Vielen Dank für Ihre Antwort
ua-cam.com/video/y7gf5OvtdCo/v-deo.html
Ich hoffe das beantwortet deine Frage
спасиба
@@sasha-3966 どう致しまして
mines a piece of shit and opens on its own and the wall control is an even worse piece of shit
Basically Marantec/Martin openers are a piece of garbage product!
Do yourself a favor and buy a LiftMaster or Chamberlain opener.
It is funny how they have nothing but great online reviews. They would rather invest in social media deception than a user friendly operation.
Haha it's all about the marketing and mass production
@@-smp-scientificmethodpersp838 sfu its the best by far (comparing with italian devices, hormann sand sommerf).
@@denyspeaks thank you!
Charles Pol?!
Sorry but your directions make no sense
ua-cam.com/video/y7gf5OvtdCo/v-deo.html
Let me know if this is better 😉
@@-smp-scientificmethodpersp838 it deprogrammed all my remotes - garage guy had to be hired
@@luisapenny8494 lol you did it wrong then. If you would have watched the link to the other video I commented to you here, you would have seen why that happened, and how to fix that easily
are you a good man or a bad man?