What if after I do the programming for setting it upwards I hit p and then instead of the bottom three lighting up the number 7 lights up and blinks instead
I love this video, I have this unit and nice to get educated from this. I have a question, would this work with Chamberlain MYQ-G0301. I have been trying to see any smart opener for this X70 that I have.
Do these garage door openers work with all-star transmitters? Just got a house and the previous owners left a garage door remote that doesn't work. I think they took the transmitter that belonged to the garage owner at the house. Complete noob at this, need info. Thanks.
Hallo, thank you for the video. My unit is behaving weird after a blackout. When entering the EOS mode, I can set the OPEN position as shown in the video. But when confirming with the P button, the lights 4.5.6 won’t turn on to let me program the CLOsE position. Instead, the lights 8,2 are on. If I press the (-) button, the door closes fully without me being able to adjust it. I did a reset but the behavior is the same after the reset. Is there a trick or is my device defective?
@@nicknield I solved the problem. The issue with mine was a missing switch cam on the Belt. It is a small metal wedge that is attached to the belt. It travels behind the unit when pulling up and presses a button behind the motor that indicates that the door is in the up position. Apparently mine fell off and I had to purchase a new one.
Thank you for these steps. Everything does exactly as you've shown, except the door continues to open too far. Past the limit I've set. Therefore, the door creates an error and won't close ?????
Can you help me with this error? After following all the steps, the opener will pull the door all the way back to the unit and then create an error. While it is opening, it is also traveling very slow for more than half the distance from close. Any ideas?
For the first time in my life, I can say that time on youtube was well spent. Outstanding tutorial!
Finally a video that made reprogramming our unit super easy. Clear, step by step instructions with video accompanying.
You're a lifesaver, thank you!
You are awesome. I bought a house and there were no remotes. I was able to program the new remotes easily. Thanks
Thank you so much I tried so many different videos this is the best total lifesaver
Thank you so much for this. I needed to program a remote for our door, and this explained how perfectly.
What if after I do the programming for setting it upwards I hit p and then instead of the bottom three lighting up the number 7 lights up and blinks instead
Having the same problem. Did you ever get yours fixed?
I love this video, I have this unit and nice to get educated from this. I have a question, would this work with Chamberlain MYQ-G0301. I have been trying to see any smart opener for this X70 that I have.
hi do i need to go through all 3 steps? what if i do not need to reprogram my remote, can I just exit programming mode after the first 2 steps?
What about programming the code for the keypad?
I would like to have another remote for a second vehicle...can I reprogram the universal remote and original remote to have both operational ?
How do I change the speed limit?
Nice job explaining!!
It worked. Thank you
Do these garage door openers work with all-star transmitters? Just got a house and the previous owners left a garage door remote that doesn't work. I think they took the transmitter that belonged to the garage owner at the house. Complete noob at this, need info. Thanks.
Hallo, thank you for the video. My unit is behaving weird after a blackout. When entering the EOS mode, I can set the OPEN position as shown in the video. But when confirming with the P button, the lights 4.5.6 won’t turn on to let me program the CLOsE position. Instead, the lights 8,2 are on. If I press the (-) button, the door closes fully without me being able to adjust it. I did a reset but the behavior is the same after the reset. Is there a trick or is my device defective?
Mine is doing the same thing. Did you ever get an answer?
@@nicknield I solved the problem. The issue with mine was a missing switch cam on the Belt. It is a small metal wedge that is attached to the belt. It travels behind the unit when pulling up and presses a button behind the motor that indicates that the door is in the up position. Apparently mine fell off and I had to purchase a new one.
Hey is it possible to make this thing work with a relay?
How can i extend the light duration while i open and close the door plesae?
how do you know which freq you need? I need a replacement remote but don't know which one to get. please help
Marantec 2 Button Remotes / 3 Count in Package by Marantec www.amazon.com/dp/B01MT0AY2Q/ref=cm_sw_r_cp_api_fabc_I5PYFbTCXV3B9?_encoding=UTF8&psc=1
Thank you for these steps. Everything does exactly as you've shown, except the door continues to open too far. Past the limit I've set. Therefore, the door creates an error and won't close ?????
Can you help me with this error? After following all the steps, the opener will pull the door all the way back to the unit and then create an error. While it is opening, it is also traveling very slow for more than half the distance from close. Any ideas?
@@barbarascroggins4031 Hello I have the same concern that you have managed to find the problem how to fix! sorry translation French / English
I have the same issue, the motor slows down in the spot I set, when opening, but does not stops
Me too i have the same issue
Same issue. Did you figure out the solution?
anyone know how to do this with a chamberlain universal remote
Thank you so much life saver
seems complicated just for a damn garage door!
Holding the p button for me just lights up two and six. This is idiotic
Not working
vamos a ver, habla español, que tu eres hispana, se te nota por lo guapa que eres ;-P
These are straight dog doo garage door openers. Ill make sure i dont get this brand ever again.