How do you Pressure test your cooling system | ALL Fords - Find YOUR leak NOW!

Поділитися
Вставка
  • Опубліковано 31 бер 2022
  • Cooling system pressure tests, leaking coolant you might WANT to WATCH this! POWERRRRRRSTROKE gang, what is UPP?!?!?! Hope you all are well. This is procedure is so important when trying to find a coolant leak. Unless your leak is very obvious then fine but if it is small, this is a MUST to have and do. Some times its the smallest traces of coolant that spike the red flags. What kit are you guys using? Did you have to get the adapters like me or did you get a master kit?? Let me know below friends & tell me what you all think! Remember to LIKE - COMMENT - SUB - SHARE
    Join this channel to get access to perks:
    / @powerstroketechtalkwarod
    To get hooked up like PTT please check out this link!
    You won't be disappointed, I wasn't...trust me, ALL worth it!
    ****** www.limitlessautoworksLLC.com ******
    Check out these other 6.7 Playlists!!
    6.7 Oil Seals Replacements
    • FORD 6.7 Oil Leak Repa...
    6.7 Turbo Videos
    • Ford 6.7 Powerstroke T...
    6.7 Repair Videos
    • FORD 6.7 Powerstroke R...
    6.7 Engine Light Videos
    • FORD 6.7 ENGINE LIGHT ...
    6.7 Maintenance Videos
    • FORD POWERSTROKE MAINT...
    Check out my Instagram & Facebook
    @PTT_W_AROD / Aaron Power Stroke
    Business Inquiries: powerstroketechtalkwarod@gmail.com
    Music: ------------------------------
    Know Myself - Patrick Patrikios
    ------------------------------
    To send a small donation to help my channel grow & to also to contact me, please visit my Paypal at my email powerstroketechtalkwarod@gmail.com
    I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple! The events, the characters & even the firms depicted in my photoplay are fictitious. Any similarity to actual events, persons living or dead or to that of actual entities are purely coincidental.
  • Розваги

КОМЕНТАРІ • 28

  • @keithbrown1915
    @keithbrown1915 Місяць тому +1

    This answered a question for me. The test, as I suspected, needs to be done on a hot engine. I am using coolant but cannot see and leak. I use a Stant tester when cold and it holds pressure. The observation on hearing the pressure bleed off when opening the d-gas bottle while hot on a properly sealed engine is a good test technique. Subscribed!

  • @josephcirelli9642
    @josephcirelli9642 2 роки тому +1

    I have 2005 6.0 L power stroke, and I did the pressure check only to find out I had blown head gasket on a standard engine! Thanks for the video as always another great one!

  • @emellina1
    @emellina1 2 роки тому +1

    Music keeps me...dancing...with PTT...yeah yeah...best bed of music on the intro!!!👊🏻👊🏻👊🏻🤟🏻🤟🏻🤟🏻🤟🏻🤟🏻🤟🏻🤟🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🤜🏻🤜🏻🤜🏻🤜🏻🤜🏻👏🏻👏🏻👏🏻👏🏻👏🏻

  • @austinsmith8588
    @austinsmith8588 2 роки тому +1

    I use the exact same kit for pressure testing! Works great!

  • @jerryknorr679
    @jerryknorr679 2 роки тому +1

    Good video ARod thanks again for sharing this ARod

  • @vince5506
    @vince5506 2 роки тому +1

    Good info Arod! Now I know 🤙🏼

  • @jonathansherwood5841
    @jonathansherwood5841 2 роки тому +1

    Pump it up!

  • @himni1
    @himni1 2 роки тому +1

    Never on a PS but I have on other vehicles. It’s the only way to find some leaks.

  • @tuckman30
    @tuckman30 2 роки тому +1

    Last week was a 6.4 fresh shortblock installed. Pour in coolant, 20 min later got drips under the front. Porous used Dorman front cover was the culprit. Real bugger to have to rip the radiator out again, after just putting the motor in. Single turbo sounds great though.

  • @axl151
    @axl151 2 роки тому +1

    I have pressure tested many vehicles, and it gets really hard to pump that thing past about 15-16PSI.

  • @imranabbasi7871
    @imranabbasi7871 2 роки тому +1

    👍

  • @danlittleton2020
    @danlittleton2020 2 роки тому

    Pressure tool to find Turbo coolant hose was leaking on Super Duty saved me time.
    Challenge for you... 2011-2014 Garrett Turbo... How do you tell by part number or other if you are getting the Updated Bearing Cage in New Turbo?

  • @zekester1
    @zekester1 2 роки тому +1

    Please be careful!! 🙏🙏...one of my classmates had a rad. hose blow off...burned his arms & neck!...Happy Friday🤗...later👍💪💯

  • @matthewfort3740
    @matthewfort3740 2 роки тому +1

    Use mind on other vehicles. So far my super duty doing just find in that department.

  • @clausgiloi6036
    @clausgiloi6036 2 роки тому

    Just developed a problem with my 08 6.4 Powerstroke F-450. Losing coolant but no drips evident. Do you have a link to a quality compatible test kit? Thanks.

  • @upnorth6.0
    @upnorth6.0 2 роки тому

    My 6.0 has a coolant leak at the front of the engine. I assume it's the radiator but had ford pressure test and said they couldn't find a leak. The other morning I bet I had at least a quart of coolant in the driveway??? Has a new water pump from bpd. Anyone have an idea what it could be, I could literally see coolant in the fan shroud so how could it not be the radiator, all the hoses are new as well.

    • @PowerStrokeTechTalkwARod
      @PowerStrokeTechTalkwARod  2 роки тому

      Psi test it urself

    • @upnorth6.0
      @upnorth6.0 2 роки тому +1

      @@PowerStrokeTechTalkwARod I'll have to rent or buy a tester, but def going to check for myself. Just weird cuz it only leaks like once every couple weeks🤦‍♂️

  • @samuelsoto8209
    @samuelsoto8209 2 роки тому

    I have 2003 f 250 7.3 engine I need the cable goes from the starter to the first battery we're can I buy it

    • @PowerStrokeTechTalkwARod
      @PowerStrokeTechTalkwARod  2 роки тому

      Dealer

    • @Brandonpowerstroke
      @Brandonpowerstroke 2 роки тому

      Just make one. You could probably make a better one for cheaper

    • @matthewgraham7419
      @matthewgraham7419 2 роки тому +2

      Look up Larry b… sells Awsome military style connectors… then pick up some 2/0 welding cable and press copper lugs on the ends with quality heat shrink. You will never have to touch them again.

    • @Dan-oo1tm
      @Dan-oo1tm 2 роки тому +2

      What a coincidence, I have the same year only an F450 with a voltage drop on that cable. The dealer said no longer available.

    • @PowerStrokeTechTalkwARod
      @PowerStrokeTechTalkwARod  2 роки тому

      Wow