Hello Super Great Video, I believe you are missing the Stihl Cover washer - 1121 162 1001 which goes over the worm gear. Am I mistaken? Thanks for the very informative video, it helped so much.
Very good an heldpfull, thank you for your video! Now I have a special question for the chainsaw 019. Actually, my flywheel of my 019T is broken and the original-flywheel is nowhere in stock. Is it possible to use a flywheel from the 017? Or another flywheel? Your flywheel has a groove, my broken flywheel has something like a tongue. Would be glad for your help! Greetings from Bavaria!
Mine used to have a key (tongue). I had to file it to a groove and use a copper wire as a key. Just a way to cheat it. If you do that, be VERY careful. If it's wrong it changes the spark timing and you could push the wire through the seal also accidentally. Sometimes you can find a used flywheel on ebay. But no, most of the other model flywheels have a different timing.
As long as the flywheel isn't cracked and you can place it on in the position it needs to be, you should be able to put it on and torque the nut down to still use it
Good evening, I watched your video with interest and I would like to ask you a question, I have a Stihl 019t in which the flywheel is broken, I can use one of the ms180, it has code 11304001201. Thank you very much.
What a stupid design, I have to fix my carburetor, Needs cleaning and rebuild, I don't believe you have to disassemble the whole chainsaw, Rebuilding my 029 boss was easier, thanks foe the Video
Thank you for this video. It helped immensely to work on my 019t! Cleaned the carb and she runs great now!
Glad it helped! Thanks for watching!
I just picked one of these up for free, it just needs some carb work. Now I understand why it was free. Great video
Thanks for watching!
Smaller filter is an oil filter for the oil line supplied…if you’re interested
Yes you're correct. Dont know what I was thinking. Thanks!
What carb kit did you get and from where?
I bought a kit for a stihl 021from amazon but it wasn't exact. I think a Zama rebuild kit would have been a better idea
Hello Super Great Video, I believe you are missing the Stihl Cover washer - 1121 162 1001 which goes over the worm gear. Am I mistaken? Thanks for the very informative video, it helped so much.
I’m pretty sure you are correct
Can you share the info off what you buy
I usually put it in the description. What item are you looking for?
Very good an heldpfull, thank you for your video! Now I have a special question for the chainsaw 019. Actually, my flywheel of my 019T is broken and the original-flywheel is nowhere in stock. Is it possible to use a flywheel from the 017? Or another flywheel? Your flywheel has a groove, my broken flywheel has something like a tongue. Would be glad for your help! Greetings from Bavaria!
Mine used to have a key (tongue). I had to file it to a groove and use a copper wire as a key. Just a way to cheat it. If you do that, be VERY careful. If it's wrong it changes the spark timing and you could push the wire through the seal also accidentally. Sometimes you can find a used flywheel on ebay. But no, most of the other model flywheels have a different timing.
As long as the flywheel isn't cracked and you can place it on in the position it needs to be, you should be able to put it on and torque the nut down to still use it
@@outdoorhubbmx8741 yes. I sometimes use red locktite too. And pay close attention to temp because a few degrees ret. will run hot
@@RayofallTrades for sure. I've not had too many advance on their own once tightened though.
Good evening, I watched your video with interest and I would like to ask you a question, I have a Stihl 019t in which the flywheel is broken, I can use one of the ms180, it has code 11304001201. Thank you very much.
I don't think that will work. I think the N/S are opposite and the timing is different
Thank you very much, have a nice day.
@@savas950 you too and good luck
What a stupid design, I have to fix my carburetor, Needs cleaning and rebuild, I don't believe you have to disassemble the whole chainsaw, Rebuilding my 029 boss was easier, thanks foe the Video
I agree. Thanks for watching!
AGREE! What a stupid design.