I was sent here via Rc Guy Garage. I love your video. Dialing in the Kaiju is an ongoing process for me, and your tips helped out a ton. I subscribed. Thank you for this video, even if it's not new, it's new to me, and extremely helpful!
Thanks for the tips, very helpful for those looking to make their truck perform better. Working on and tuning your rig is part of the fun in RC, so keep doing the how to vids, I enjoy them and sure may other viewers do also! 👍😁
Thank you i have a brandnew KAIJU and your video answerd my issue about the steering and servo i havent put it on any street or anything i have advanced mine in a way i havent seen yet but just looking at my steering i noticed the towe and litte stuff please keep your videos coming you explained it perfectly and i understood it all i will lookforward to your next RALPH .
Great video mate!! Yeh please more like this, it takes some of the guess work out of the hobby and it's so good to hear other people's ideas on how to. Thanks again mate 👍🦘🇦🇺
Thanks for the input I appreciate it! I think the same way. I mostly watch videos explaining setup etc so you at least have a good starting point before you begin a project.
@@GussCustomCreations Spot on mate! You can learn so much from other people. Those tyres look like the perfect tread pattern for traction on loose surfaces! I use the same pattern on my enduro bike and they bite really well. I'd like the same design tread pattern on a 1.9 rock crawler tyre, hard to find! Thanks again for the vid 👍
Thanks for sharing. U mention adjusting the servo saver and pinion gear needing locktight . Hoping you can share those thoughts and how to do that for us newbies . Thanks again! Waiting for some free time to run my new Kaiju
Cool video brother! Im done with work early and heading home. Im going to take the element enduro out to the deer trails! They have the snow packed perfectly and even I don't sink in.
@@jackman1989 I guess it would depend on what you are doing for driving. Straight up bashing I would probably go with the proline as they are a bit more squishy for impact. If you are going on road the power hobby would be the way to go but you will need wheel spacers as the power hobby have a deeper dish and the stock are almost centered in the wheel.
To be honest I don't remember. I have several videos on the Kaiju but I don't remember if I specifically showed how to adjust the toe. Check my channel out, I have a playlist of the Kaiju videos.
Do you know of any cheaper, adjustable links for the Arrma Granite MEGA 4x4, to make it adjustable? And yes, these video help a lot. Thanks for doing them.
Thanks I appreciate it. To have adjustable upper links, and stearing links on the Granite Mega you just need to get the links for the Granite 3s BLX. I did some searching and these are the part # you will need. 3 packs or AR330535, 1 pack of AR330470, and 1 pack of AR330515
GUS I have the Kaiju coming in and have Venom batteries for them. i dont know much about changing out the wires from deans to other connectors. do you have a video on that?
I don't have one but if you check UA-cam there's a bunch of videos on how to change the connections to xt90. I believe RC Guy Garage has one which is why I didn't make one. If you run into trouble and need any help just send me a message on Facebook and I will give you a hand. 👍👍
The diffs actually do have diff fluid in them. I am guessing stock is about 50k front and rear with probably about 200k in the center diff. Im planning on switching to 100k front and rear with 500k in the center.
@@GussCustomCreations oh wow that's good to hear. I thought I saw a video of someone opening the diffs and finding grease that felt real thin. Maybe I wont have to open them up right away.
Hi gus could you tell me where to plug in the motor fans I tried under the little box and they won't turn on but they will if I plus them into the headlight or tail light wires
I plugged mine into the open spot on the receiver. Just have to make sure you are plugging it in to the correct 2 pins. The receiver is marked what the pins are, the black should go to the outside pin.
Yeah it depends on the use and load. 4s seems to be the best and 6s gets hot if you are running it down the road because of the high RPM and draw from the speed runs.
I was sent here via Rc Guy Garage. I love your video. Dialing in the Kaiju is an ongoing process for me, and your tips helped out a ton. I subscribed. Thank you for this video, even if it's not new, it's new to me, and extremely helpful!
You're welcome. Thanks for watching 🙏
Thanks for the tips, very helpful for those looking to make their truck perform better. Working on and tuning your rig is part of the fun in RC, so keep doing the how to vids, I enjoy them and sure may other viewers do also! 👍😁
Thanks I appreciate it. For me I almost like tinkering more than driving sometimes!
Keep these videos coming! Great information with this one . . . Yes
Thanks for the input. Hard to tell what people want to watch. Sometimes you think hey this is a good idea and no one watches it lol
@@GussCustomCreations DON'T FALL into that trap! Make your videos and sometimes your direction will just catch on.
Thank you i have a brandnew KAIJU and your video answerd my issue about the steering and servo i havent put it on any street or anything i have advanced mine in a way i havent seen yet but just looking at my steering i noticed the towe and litte stuff please keep your videos coming you explained it perfectly and i understood it all i will lookforward to your next RALPH .
Thanks man, I appreciate it! Hope to have more Kaiju videos soon!
That's how my shocks came stock just like urs already adjusted ...luv my kaiju happy bashing Gus
Thanks. I wonder if they figured it out or mine were just wrong? Either way its a fun truck!
Thanks for the video im new to the hobby and recently bought the kaiju keep the videos coming
Thanks I appreciate it, 👍👊💪💯
Thanks for sharing
Thanks for watching!👍👍👊👊
Great video.
Great truck.
Thanks for the tips.
Had mine out the other day and what a trip it was while running.
It is. I really like it. Thanks man 👍
Keep doing what you're doing 👍👍got alot from that video.,just got mine.
Awesome! Thank you!👍👌💪✌
Great video mate!!
Yeh please more like this, it takes some of the guess work out of the hobby and it's so good to hear other people's ideas on how to.
Thanks again mate 👍🦘🇦🇺
Thanks for the input I appreciate it! I think the same way. I mostly watch videos explaining setup etc so you at least have a good starting point before you begin a project.
@@GussCustomCreations
Spot on mate!
You can learn so much from other people.
Those tyres look like the perfect tread pattern for traction on loose surfaces!
I use the same pattern on my enduro bike and they bite really well.
I'd like the same design tread pattern on a 1.9 rock crawler tyre, hard to find!
Thanks again for the vid 👍
Thanks for the great videos 🙂
Thanks for watching! 👍👍👊👊😁
Thanks boss! Very helpful.
You're welcome, thanks for watching!
Keep doing these videos!!! Super helpful!!! Gus is the fu**ing man!!!!
Thanks man. I appreciate the feedback!
Absolutely love informative videos. Great!
Thanks I appreciate it.
Thanks for your input ..yah I just got one ..first thing change to XT 90s and make some changes after the first bash ….
Thanks for watching.👍👊✌
Yes sir! 💯💯
💪👍✌👊😎
Thanks for sharing. U mention adjusting the servo saver and pinion gear needing locktight . Hoping you can share those thoughts and how to do that for us newbies . Thanks again! Waiting for some free time to run my new Kaiju
Thanks man. I just like to share my experience and I just hope I can help anyone just starting out or new to a certain vehicle.
Yes if you check my other video I tell you how. Mine might have been different but it's a good thing to check just in case.
I love these vids
Thanks for the input I appreciate it
Cool video brother! Im done with work early and heading home. Im going to take the element enduro out to the deer trails! They have the snow packed perfectly and even I don't sink in.
Yah josh and I have been flying around the yard with the Kaiju like its the sand dunes. Lots of fun. Thanks man.
It's awesome right now. The snow conditions are what we wait for all year then it will be gone in a few short weeks.
@@MD-NWWI a few weeks if we are lucky. Last year it kept snowing so it never happened lol
Hey these good videos keep them coming. Thanks for info
Thanks for the input I appreciate it!
I'm getting mine Tuesday. First RC car all pointers on just starting out will help out alot.
Hey I just curious is running belted tires better? If I went that route which kind of belted tires would you prefer?
@@jackman1989 I guess it would depend on what you are doing for driving. Straight up bashing I would probably go with the proline as they are a bit more squishy for impact. If you are going on road the power hobby would be the way to go but you will need wheel spacers as the power hobby have a deeper dish and the stock are almost centered in the wheel.
I gonna stick to mostly gravel,sand and grass areas.
Mine will be here this week -- already read where you need to re-tighten everything -- why not tweak it as well ;) Thnx EJ subbed
Right tweaking and tuning is fun. Thanks for the sub!
do you have a video on how you adjusted the toe? im new to the rc world and i have the kaiju ext
To be honest I don't remember. I have several videos on the Kaiju but I don't remember if I specifically showed how to adjust the toe. Check my channel out, I have a playlist of the Kaiju videos.
Do you know of any cheaper, adjustable links for the Arrma Granite MEGA 4x4, to make it adjustable? And yes, these video help a lot. Thanks for doing them.
Thanks I appreciate it. To have adjustable upper links, and stearing links on the Granite Mega you just need to get the links for the Granite 3s BLX. I did some searching and these are the part # you will need. 3 packs or AR330535, 1 pack of AR330470, and 1 pack of AR330515
@@GussCustomCreations Thanks Gus, I really appreciate your help.
👍👍 over here
👍👍👊👊
GUS I have the Kaiju coming in and have Venom batteries for them. i dont know much about changing out the wires from deans to other connectors. do you have a video on that?
I don't have one but if you check UA-cam there's a bunch of videos on how to change the connections to xt90. I believe RC Guy Garage has one which is why I didn't make one. If you run into trouble and need any help just send me a message on Facebook and I will give you a hand. 👍👍
@@GussCustomCreations will do thanks so much.
Have you had any problems with breaking the center driveshaft?
I wore out one of the cups but no issues with the driveshaft.
@@GussCustomCreations I must be the first to break one lol
Any recommendations for tuning the diffs? I'm guessing with just a little grease inside it'll be time to put in oil sooner than later.
The diffs actually do have diff fluid in them. I am guessing stock is about 50k front and rear with probably about 200k in the center diff. Im planning on switching to 100k front and rear with 500k in the center.
@@GussCustomCreations oh wow that's good to hear. I thought I saw a video of someone opening the diffs and finding grease that felt real thin. Maybe I wont have to open them up right away.
Hi gus could you tell me where to plug in the motor fans I tried under the little box and they won't turn on but they will if I plus them into the headlight or tail light wires
I plugged mine into the open spot on the receiver. Just have to make sure you are plugging it in to the correct 2 pins. The receiver is marked what the pins are, the black should go to the outside pin.
Thanks alot
Running it on 4s I picked up 2 -3s batteries...
Most of the time I run 4s. In my yard 6s is just way to fast and I hit things lol 🤣🤣👍👍
I hear they get hotter running 3s, because it's built for 6s, so it has to work harder on 3s.
Yeah it depends on the use and load. 4s seems to be the best and 6s gets hot if you are running it down the road because of the high RPM and draw from the speed runs.
What's up man!! Did you re position the rear shocks also???
Great video by the way
Yes sir I dropped all 4 shocks. Thanks I appreciate it.
I'M GETTING HUNGRY
I did used to be a cook in a short order cafe for a couple years. I can make a mean Mexican omelette.
Do you respond I know this is old but I have a question
Sure what question did you have?