Ducati 5am ecu diagnostics & mapping Guzzi diag

[@breaddrinker]

Yours may be the only from scratch beginners guide to connecting.
This stuff is scary when you haven't done it before, and due to the exclusion procedures online, everyone acts as though they were born with the knowledge.
Thanks so much. It's very appreciated.

[@rodyoung2014]

Thanks Rob, glad it was useful for you.

[@rbosch15]

Thanks Rod!! Exactly what i was looking for, I now feel confident enough to go and try this myself.

[@paulcooper5610]

Many Thanks for this video, I have a moto Guzzi and having watched your video, I am now happy to try this on, if nothing else I'll try the co2 setting and hopefully make it richer which will hopefully improve the running at low revs.

[@LeTessier916]

I know that this is an old video now. Did you use the Guzzidiag (I believe it has been upgraded now) to take the immobiliser off your ecu? If not, how did you do that? Did you use some sort of writing software? Thanks very much

[@odysseusdrakos2008]

What an excellent and thorough tutorial Rod, thanks for sharing, I think even a caveman like myself can manage to follow this. cheers, Ion.

[@mauro4473]

ciao, ti devo ringraziare molto per aver messo questo video. ho una multistrada 1000 a cui ho dovuto cambiare la centralina e sono riuscito a fare tutto grazie a questi programmi. non sapevo che guzzi diag funzionasse anche su ducati!!! bella moto la multi....ciao

[@brian_the_wrench]

Lots of great info, thank you! One question, regarding 5:39 to 6:11 of the video, to enrichen, would you increase that number to -14/-13/-12 and so on? Or go in the other direction (-16/-17/-18...)

[@anubis8680]

Excellent video!! Might be exactly what I need. Your positive the 5AM ECU ‘s were modeled for air cooled only bikes? I got a IAW 5 AM .BS 999 ecu, stuffed into my 07 S4R Testastretta, it was very snappy on my test drive but after it hit the dealership for maintenance, it felt a little more sluggish. They told me it was an aftermarket ecu and also the Dash is from a PS 1000 I think. I know what you’re thinking I did all the checks on the Vin and everything else it was never listed as totaled damaged or stolen. I just think somebody had some heavy electrical issues with it and that was the cheapest fix they could come up with. It runs “ok” but I feel its out if tune a bit. Think with enough fiddling I could crisp it up a bit here with this software?

[@sorinchirica7819]

How can I make immo off? I have a multi 1000ds,

[@KawasakiZ1Guy]

Excellent video Rod! And I think you and I own the best motorcycle there is (mine is black). Looking for the racing version bin file without Immobilizer if anyone has a source.

[@Jareddoesthings]

What do I use for the Marelli 5.9?

[@DB-mg7dw]

where do i get the tuning files? ( aprilia dorsoduro 750)

[@supartianatiana978]

Can use for vespa sprint iget engine

[@dsevwrh]

Is it possible to find a race map for a tuono v4 1100 factory 2016??

[@georgetrakadas8595]

useful.....

[@Brandon_Sutton]

Where did you get the usb scanner to plug into the motorcycle port?

[@MrKdr500]

Google "Lonelec" motorcycle cables.

[@jerryx2000]

Hi can you modify the exhaust flap with this? So it stays closed under 6000 rpm?

[@rodyoung2014]

There is no exhaust flap on an air cooled MTS.

[@jerryx2000]

@@rodyoung2014 I have an Aprilia. Can I modify it with this software

[@rodyoung2014]

@@jerryx2000 does it have a 5am ecu??

[@jerryx2000]

@@rodyoung2014 what is a 5am ecu?

[@rodyoung2014]

The type of ecu fitted to air cooled ducatis and moto guzzis. Unless your ecu is the same, this software will not work.

[@barrysuffridge2508]

03 st4s will this software allow me to enter my key code to bypass immobilizer for emergency start?
Thank you

[@rodyoung2014]

No, that's not what it is for. It only works with 5AM ECUs, which are used on the majority of air cooled Ducatis and Guzzis.

[@distilledpusswater8473]

Can you remove the immobilizer check function in the ecu on a Ducati 1098? Or in general as far as you know?

[@rodyoung2014]

Yes, it is possible but you need different software to this.

[@distilledpusswater8473]

@@rodyoung2014 any idea of what software i would need to get my hands on? If not you’ve already helped out a lot thank you

[@rodyoung2014]

Sorry, I only do air cooled!

[@nitroboy2]

hiya ,
im busy with the ECU writer , but my maps ar in .HEX , i need .BIN ?

[@dragosboda]

what obd model ?

[@o3wrebamia197]

This map can be used in hypermotard 1100?

[@rodyoung2014]

Yes, it's the same.

[@o3wrebamia197]

@@rodyoung2014 i have some questions.. Can we contact from Fb or something else

[@rodneyhaime1164]

Hi Rod I have hypermotard 1100 evo can you help with a map I have the 4 pin and 3 pin and the elm odb11 thing how can you help me