I've just tried opening a 3rd party 78A toner cartridge (which lasted NOTHING!) with your video, and it was a piece of cake. Now that I know it's doable, I'm going to try refilling it. Thanks a lot!
Thanks dude, I was having trouble with one particular cartridge, I was always refilling one cartridge where you uncork a cap on one side and then pour a generous amount of ink, imagine my surprise when I couldn't find any cap, now I realise that can you do it your way, by simply removing this cylinder. Thanks!)
Yes, it depends on toner quality and model. Try to go to your printer settings and check if the toner save or economy mode is off, and also adjust the print density or contrast settings to increase toner usage for darker prints.
Do you mean from the waste container? You can but that part of the cartridge also keeps a lot of dust and paper particles. So the quality of printing will drop for sure but it will though.
You can put inside 100 grams of toner powder but I'd recommend to lower it to 80gams. No need to stress mechanics of the cartridge which is not designed for refilling.
why did you say to do not replace the chip? i have a th-36a toner and i am in the process of refill and the powder is spilling from a hole on that part where is the bigger cylinder. is it possible i have to refill it there? or i have to refill surely where you are refilling? i dont understand why because the powder is spilling from the other part. thanks for answer.
That chip is simply calculating the approximate amount of toner left in the cartridge. There's no need to replace it. You'll definitely notice when you need to replace or refill your cartridge. This cartridge consists of two parts. One stores good toner and another one stores the waste toner (under the big cylinder) and you have to clean that part. If you refill your cartridge through the hole without dissembling the cartridge it will destroy your cartridge after a couple of refills.
@@ElectronicsComputers Thats definitely a useful information to me, i did not know anything about waste powder. thank you. I was wondering why is there that much powder under the big cylinder... btw i thought there are a variety of methods to determine ink/powder level in cartridges and i thought one of them is by counting pages and after reaching certain number it stops printing and this is why i need to change the chip. so thats also new information. thanks for that. but I have bought a few chips so i might use them. :)
i hear there is a dust buster on the otherside for those powder that got burned or something that need to fill out and you didint do it , it that necesery ?
After second or third refill you have to clean the waste toner container. Simply remove the OPC drum and you'll see a narrow gap there, then simply flip the cartridge down with that gap and shake the cartridge to dump out the waste toner from the waste container.
Can I use the old chip from hp 58a toner cartridge after refilling? If so will it keep printing or will it stop giving warning as to replace the cartridge?
All those chips are different and not interchangeable. There's no need to replace them, your printer will work without any problems. The only drawback, it's not gonna show you the toner level.
Yar Ek bat pochni he aap se Meny new HP m26nw machine le he us me Jo company ki black cartage powder thi wo meny use ki Last me "used black cartage in use " ka msg aa rha tha screen pe aur copy bhi white white nikal rhi thi Meny toner refill krwa k lagaya tu wohi wesa chal rha he jesy Pehly tha Mtlb koi farq nhi Ab me Kia Karon batao yar plz ans reply
It's about 10-15 bucks depends on the amount of toner powder and chip. By the way I'll make a new video in a few weeks how to reset original chips so they will show again 100% of toner and no need to replace them.
I've just tried opening a 3rd party 78A toner cartridge (which lasted NOTHING!) with your video, and it was a piece of cake. Now that I know it's doable, I'm going to try refilling it. Thanks a lot!
Happy to help! It's a very easy process.
Thank you so much, i do it on my 85a, but in 10 minute..h.ha, i use a Canon toner, and the result is pretty good
Nice work!
Really loved it 5th time I am filling my toner with your vide
That's great
2 minite me refill huya?
markeet se koi bhi tonner ka powder dal sakty hain ya 30 A ka specific toner powder hy. agr specific hy to plz is ka nam bta dein
Thanks dude, I was having trouble with one particular cartridge, I was always refilling one cartridge where you uncork a cap on one side and then pour a generous amount of ink, imagine my surprise when I couldn't find any cap, now I realise that can you do it your way, by simply removing this cylinder. Thanks!)
Yeah, it's not that easy with modern cartridges. They do whatever in their power to prevent cartridge refilling.
Is the music from ozee? You refreshed some childhood memories with the music😭
I just refilled the cartridge but the darkness is a bit dull. Is it toner issue or I need to reset the chip?
Yes, it depends on toner quality and model. Try to go to your printer settings and check if the toner save or economy mode is off, and also adjust the print density or contrast settings to increase toner usage for darker prints.
@@ElectronicsComputers ok thanks
everything is ok about refilling...but it would rather batter if you demonstrate to empty the waste chamber to new beginners.
Can leftover powder mixed with the non-original powder during refilling process?
Yes, you can! No need to clean from previous toner powder.
that gotta be the dumbest question on this post..
@@marcuse.9522 No it isn't. mixing powders often doesn't end so well, plus you have to clean the toner very well before putting in the new powder..soo
Can we re use toner ? Please reply with your experience.
Do you mean from the waste container? You can but that part of the cartridge also keeps a lot of dust and paper particles. So the quality of printing will drop for sure but it will though.
Sir I have LaserJet Pro 200 color MFP M276nw printer, for hp 131a black cartridge refill witch toner powder suitable . Please advise me
How many grams does it contain in your refill with 36a?
You can put inside 100 grams of toner powder but I'd recommend to lower it to 80gams. No need to stress mechanics of the cartridge which is not designed for refilling.
why did you say to do not replace the chip? i have a th-36a toner and i am in the process of refill and the powder is spilling from a hole on that part where is the bigger cylinder. is it possible i have to refill it there? or i have to refill surely where you are refilling? i dont understand why because the powder is spilling from the other part. thanks for answer.
That chip is simply calculating the approximate amount of toner left in the cartridge. There's no need to replace it. You'll definitely notice when you need to replace or refill your cartridge. This cartridge consists of two parts. One stores good toner and another one stores the waste toner (under the big cylinder) and you have to clean that part. If you refill your cartridge through the hole without dissembling the cartridge it will destroy your cartridge after a couple of refills.
@@ElectronicsComputers Thats definitely a useful information to me, i did not know anything about waste powder. thank you. I was wondering why is there that much powder under the big cylinder... btw i thought there are a variety of methods to determine ink/powder level in cartridges and i thought one of them is by counting pages and after reaching certain number it stops printing and this is why i need to change the chip. so thats also new information. thanks for that. but I have bought a few chips so i might use them. :)
Will this cause any authentication problems?
What do you mean?
ভাইরে আপনার রিফিল সিস্টেম টা অনেক জটিল ও অসম্পূর্ণ। এর চেয়েও সহজ সিস্টেম আছে
i hear there is a dust buster on the otherside for those powder that got burned or something that need to fill out and you didint do it , it that necesery ?
After second or third refill you have to clean the waste toner container. Simply remove the OPC drum and you'll see a narrow gap there, then simply flip the cartridge down with that gap and shake the cartridge to dump out the waste toner from the waste container.
How do I know if mine if the 79a is empty without taking it apart. I don’t have a printer for it.
I found 10 of them but I think they are used.
The full one is heavy and when you knock the container it sounds quiet.
Where do I buy the toner? What are the smart chips for? Mine is the 85A cartridge
is that a black iron oxide powder?
Yes, it's one of the main components of any toner powder.
Witch toner powder suitable for hp 131a black cartridge
Thank you it helps me a lot
You're welcome!
Nice method and thanks.
Most welcome
@@ElectronicsComputers How many times toner cartridge can be refilled?
@@ednanayub Up to 7 times.
Is this the same for the hp1188w laser toner cartridge?
Yes, the same process for 142A toner cartridge that is used in your printer.
How much toner powder should I add for 88A?
80 grams.
Thank you dear
Welcome!
Can I use the old chip from hp 58a toner cartridge after refilling? If so will it keep printing or will it stop giving warning as to replace the cartridge?
All those chips are different and not interchangeable. There's no need to replace them, your printer will work without any problems. The only drawback, it's not gonna show you the toner level.
Yar Ek bat pochni he aap se
Meny new HP m26nw machine le he
us me Jo company ki black cartage powder thi wo meny use ki
Last me "used black cartage in use " ka msg aa rha tha screen pe aur copy bhi white white nikal rhi thi
Meny toner refill krwa k lagaya tu wohi wesa chal rha he jesy Pehly tha Mtlb koi farq nhi
Ab me Kia Karon batao yar plz ans reply
Mera v same yhi condition h Bhai thik kaise hua aapka
Machine sath le k jao phir sahi kr den gy refilling waly
Unlog to bol rhe Bhai ki cartage hi change Krna padega ye demo cartage hai
88A/ 78A has a chip what about that one
App ka kit Kaha se laya ha. Mujha bataa da
Unsupported Black Cartridge
Order HP Part CE278A
I struggle to find a place to buy the powder 😣
The links in the description.
@@ElectronicsComputers many thanks, apologies for not seeing the most important one😅
I want to buy that ink hopper cover
Which powder use this caterage
The link in the description. For most laser printers with the same resolution and print speed toner powder is usually compatible.
Is it necessary to change the chip?
it's up to you. The chip doesn't block printing but it will show the message on your device that you have to replace the cartridge.
After refill print quality is low.. how to reset it
Yes, same issue. Ink has to blame maybe?
After refilling toner printing is too light... Plz help
There is too much proceses that guy dont do on video...
Thanks 😅😊
Welcome!
How much grams used to refill 51a?
300g
Can someone suggest a good reliable color laser printer with fairly easy refillable toner?
Ideally I'd recommend using Canon color laser printers or for example Brother printers like this one: amzn.to/3Z77WkX
Do you wear mask?
Sure!
how to reset ink level after refilling the ink in hp laserjet p2055dn
replace to toner chip after refilling
Can I use it for 44A?
No, those are very different cartridges.
how much to fill in 85A
80 gramms
DEUS ama voce,GOD love you,DIOS Ti ama
Cual es el precio de reciclar
Reusing is more sustainable
How much to fill in 83a toner?
80-100g
Bravoo
Happy to help!
Добро пожаловать
Video assa hai kuch boola nahi hai na too kiske baje se kaya problem hota hai kase pata salega
Bro would like to job in my office
😊No I'm good thank you
2013Electronics&Computers May I know how much you charge for catriage reflling in your country i charge here only 5 dollar
It's about 10-15 bucks depends on the amount of toner powder and chip. By the way I'll make a new video in a few weeks how to reset original chips so they will show again 100% of toner and no need to replace them.
2013Electronics&Computers please make a video about how to refill ricoh sp 210 catriage
How much oz????
2.5-3oz will be fine.
flowme