I like this video for a few reasons! 1. It's really a rusty piece. Not just left in the garden mud for a week. 2. You don't have all the fancy equipment. You use logical and practical things to get the job done. 3. It looked like it was hard work! Well done sir!
My man. You did 1000% better than I could or would even attempt. That being said. If you're going to say it's a perfect restoration. You should see either my mechanics, or mister patina.
Never heard of Yung.. Turned out pretty good.. I just pulled a 100Lb Prentiss vise out of the ground in front of my barn.. Cant wait to find time to bring her back..
Anyone who can take on a challenge like that...I must subscribe to. "Repurposing" today is King. The sense of pride in seeing (and using) that tool is priceless. Don't allow the doubters below keep you from bringing back life into a forgotten utilitarian piece like that. I took on a miniature vise like that many years ago, and it was so precious to me that I had it mounted onto a nice chunk of black walnut for my desk. It never ceases to bring a smile to my face. Great work !!!
Nicely done :) To help with TIG welding make sure you get correct gas flow and in case of "bubbling" when welding mild steel try and use stainless steel filler rod (helps with dropping temperature if mild steel overheats what causing "bubbling"). I'm usually wrapping cable around my hand once so it doesn't pull my hand down so I can keep more consistent weld and proper support for your hand helps a lot. Check if you got HF setting on your machine as I think you have "contact" set up so you starting and right away sticking your tungsten onto the job. Those vise are made out of cast iron which should be welded with proper electrodes or MIG (as 2nd option) since welds done with TIG are prone to crack really fast. Also for your own safety ditch gloves when working on lathe, please. Basic safety rule got "no gloves or loose sleeves" policy while working with these machines.
Il faut proteger le banc du tour quand on soude et essayer de ne jamais meuler sur un tour, les grains de meulage vont partout detruire les usinage precis des pieces du tour à métaux.
Наковальня получилась просто Сууууперрр отличная работа теперь можно заняться и слесарными работами чтобы восстановить старую наковальню нужно много времени и терпения 👍👍👍👍👍👍🔥🔥🔥🔥🔥🔥.
I have watched lots and lots of vise restorations and I think you get the prize for the most extensive repairs in the restoration. Awesome job @ rebuilding.
The only part I didn't like was Rusty Boy using filler. It's a tool not a Rolls Royce! Oh and stop using gloves around spinning lathes you could lose arm or a hand if your glove gets caught while the lathe is spining! We don't wanna see you get hurt so be safe bro!
i was thinking something like that as well, but if you are going to use filler, you have to do all of it or else it shows that you used it and it takes away from the work you did.
Hello, I liked the sequence of your work to restore the iron vise and this is the logical and practical sequence of removing old rust from rusty iron objects. You have my utmost respect for this wonderful and very beautiful effort.
WONDERFUL, I have no words, always super perfect and unique precise product, wonderful work and video, well done and good luck, respect from old BG. p.s. It is a great pleasure for me to see that there are such precise people in the world, from the White race!!!
When using electrolysis, try not to use salt. It breaks NaCl bond of salt and form toxic chlorine gas. Baking Soda will work as well with no poison gas.
Great Job. To improve your TIG welding, hold your TIG torch more perpendicular to your work - think 90 degrees with 20 degrees of tilt or so. The torch heats the material and the rod is to "fill" the void the heat creates.
Rusty boy I will now relate a story I was but a child my father worked in a machine shop we went down one morning early and let ourselves in with a key and we found a guy just completely turned up into a bloody ball and the lady was still running and the reason that the lady got him was because he wore gloves never ever ever wear gloves around rotating Machinery ever no gloves get rid of them no gloves rotating machinery I assume that you have no one there to help you with these things not to criticize you I want to keep you from losing an arm or a finger okay
Nice job. Referencing the 14 minute mark, you’ll get much better threads and you’re tool will last much longer if after every turn forward you reverse your tap about half to two thirds of a turn to clear your chips. And always use a lubricant. Margarine or even water if that’s all you have but turning threads dry and not clearing your tap is asking for a broken tap stuck in your hole.
Not perfect to be sure, but he's only a lad and he is learning by trying rather than most folk here who just watch others do it. It turned out just fine and is a useable tool again. If he could go back and start over, I'm sure he will have learned enough to do a quicker, better job and in a safer way
This was a particularly poorly built vice to begin with and you absolutely made it great! It's better now than it ever was in its life previously! Great work!
Nice but i have a question. Has the inside of the vice sleeve rusted again? Because when you assembled it it seemed so. Could you have polished it inside with a wire brush head on a drill? Or some sand paper?
2:10 se nota la lectura de 24.7 libras o son 11.2 kilogramos?. Me gustó mucho tu proceso y el resultado final. La marca YUNG seguramente es China, igualmente NO logré encontrar información de ella; de hecho SOLO tu tornillo de banco aparece en google. Seguro es China, la calidad de la pieza es algo burda PERO robusta. Saludos¡¡¡
Electrolysis didnt really seem to do much - might be worth using baking soda in future. Probs wouldve been a good shout to wire brush all the loose crap off it first, looks like thats mostly the loose debris floating to the surface. Im also fairly surely TIG isnt supposed to spark like that... but you did a good job with what seemed to be a fairly low/mass production vice. Also tap with 2 hands, 1 hand is how you break it and spend an afternoon swearing at it. Speaking from experience here 😂
Harbor Freight sells an air tool called a Needle gun would have helped getting heavy rust off. We used them in the military to remove the rust you had on the vice. Then you could use the electrolyzes to get the rest of the rust off.
I agree with filling nicks and dings from use but I really don't appreciate those restorers that make the entire casting smooth like it had never been used and now looks likes its made of plastic. It takes away from it natural beauty. Thank you for sticking with the G code.
Oh my god, it makes me scared to imagine how much rust went off this girl during electrolysis. The vice might have lost 500-600 grams easily. Great job man, thank you!
☠️ when you put your gloved hand on the spinning shaft you were risking a grizzly death☠️. I know of too many people killed by garment wraps in PTOs. Be safe.
I enjoyed your video. Restoring the vice to a usable state is an effort. I disagree with the viewers who called it a pig. Perhaps they have never used a vice for it's intended purpose. They are made to hold things to work on sometimes to beat on not to win a beauty pageant. Either way looks good and will last another 50 years. Good job.
@@davidwillard7334 look at the first post on this video. Patrick Kelly. Not that we need to bring out the pitch forks and torches... but that's where that statement originated.
@@RustyBoyCrafts That is not an answer. That’s an excuse. If you were to use a wire wheel first it would remove all the heavy rust. This making the electrolysis method far more effective and faster. So. You would have more content to show viewers. Unless you prefer not to use an angle grinder with a wire wheel. If that is the case. Then just say so. They are dangerous and messy and I’m sure you may not want to wearing respirator due to fine particles of rust being thrown into the air. I was only curious. I could’ve used any answer besides the one you chose to reply with. But it’s your channel and your video project so go with the answer that naked you feel good inside.
Great job on the restoration; and a workshop filled with some excellent tools. It’s always a pleasure to watch something that’s so damaged being brought back to life and almost new. However, if it was me, I think I would have thrown the old vise out and bought a new one. Not one for having patience. But the point is it was an incredible restoration, and very entertaining to watch. Good video.
Creo k le faltó mucho para k se le pueda llamar restauración ya k el cuerpo del tornillo, le falto trabajo en todo, en cuanto a palancas y demás accesorios la limpieza y pulido estuvo pasable
I agree any space behind the jaw puts stress on the bolts and on a hardened steel jaw ....... and yet he mills the anvil surface that will in all likelihood get the crap knocked out of it
Shiny is ok if you want it as a paperweight or a doorstop - these tools get a bit of a battering over the years if you use them regularly, not much point polishing for hours or you'd be too scared of dinging it to do any work at all
An excellent “ bring back to life “ piece ; i really enjoyed watching your video , you are a Master Craftsman.
Thanks for sharing …..
I like this video for a few reasons!
1. It's really a rusty piece. Not just left in the garden mud for a week.
2. You don't have all the fancy equipment. You use logical and practical things to get the job done.
3. It looked like it was hard work!
Well done sir!
My man. You did 1000% better than I could or would even attempt. That being said. If you're going to say it's a perfect restoration. You should see either my mechanics, or mister patina.
Never heard of Yung.. Turned out pretty good..
I just pulled a 100Lb Prentiss vise out of the ground in front of my barn.. Cant wait to find time to bring her back..
Anyone who can take on a challenge like that...I must subscribe to. "Repurposing" today is King. The sense of pride in seeing (and using) that tool is priceless. Don't allow the doubters below keep you from bringing back life into a forgotten utilitarian piece like that. I took on a miniature vise like that many years ago, and it was so precious to me that I had it mounted onto a nice chunk of black walnut for my desk. It never ceases to bring a smile to my face. Great work !!!
SO ! WHAT ! Do ! You ! Do With it ! ? In the Workshop !? With it ! Then !!
@@davidwillard7334 It used to be a jewelers vise, but now it's a keepsake.
Son piezas de coleccion amigo
geesh louise, Was this thing used as a boat anchor ??!!
BEAUTIFUL !
Nice job, though as others have remarked, no gloves or loose sleeves near lathes.
Sehr gute Arbeit.
Danke schön 🙏
Vises are pure logic very handy indeed the guy who invented them was a genius....
They never show us the part where they bury it in the garden for a year.
Nicely done :) To help with TIG welding make sure you get correct gas flow and in case of "bubbling" when welding mild steel try and use stainless steel filler rod (helps with dropping temperature if mild steel overheats what causing "bubbling"). I'm usually wrapping cable around my hand once so it doesn't pull my hand down so I can keep more consistent weld and proper support for your hand helps a lot. Check if you got HF setting on your machine as I think you have "contact" set up so you starting and right away sticking your tungsten onto the job. Those vise are made out of cast iron which should be welded with proper electrodes or MIG (as 2nd option) since welds done with TIG are prone to crack really fast.
Also for your own safety ditch gloves when working on lathe, please. Basic safety rule got "no gloves or loose sleeves" policy while working with these machines.
Il faut proteger le banc du tour quand on soude et essayer de ne jamais meuler sur un tour, les grains de meulage vont partout detruire les usinage precis des pieces du tour à métaux.
Beautiful job.
I LOVE how you have limited resources but you do wonderful work. Men with improvisational skills will rule the world
Rule the World !?? In what ! Way !! Then !
What limited resources? He's got a lathe, milling machine, tig welder and who knows what else tucked away in his workshop.
Well done. Turned out great.
Nice!
Brought that vise back in the game/Outstanding-Bravo....
good stuff. I want this piece.
I can restorate for you
@@RustyBoyCrafts can I buy this piece? or something similar? I'm looking for a large vise
I can find similer vise, i think you should send mail rustyboy@outlook.com.tr
Very nice.
God, I love hacksawing on a lathe! Parting is like pulling teeth.
Наковальня получилась просто Сууууперрр отличная работа теперь можно заняться и слесарными работами чтобы восстановить старую наковальню нужно много времени и терпения 👍👍👍👍👍👍🔥🔥🔥🔥🔥🔥.
Hey you did a really good job 👍🏻 👍🏻👍🏻🤘🏻😎🤘🏻
nice work
To say this is a challenge would be an understatement.
Wow that thing was in a bad way at the start. Nice restoration. Looks brilliant. Well done.
I have watched lots and lots of vise restorations and I think you get the prize for the most extensive repairs in the restoration. Awesome job @ rebuilding.
You should look Meine Mechaniser! He is the best.
Watch my mechanics... HE IS THE BEST
Gute Arbeit von einem guten Mann!Viele Grüße aus Deutschland!👍🖖🍀
Viele dank! 🙏
Игде находиш такие антиквариати???
Very nice and clean job.
The only part I didn't like was Rusty Boy using filler. It's a tool not a Rolls Royce! Oh and stop using gloves around spinning lathes you could lose arm or a hand if your glove gets caught while the lathe is spining! We don't wanna see you get hurt so be safe bro!
i was thinking something like that as well, but if you are going to use filler, you have to do all of it or else it shows that you used it and it takes away from the work you did.
@@nicodemus7784 Hopefully he watches a few "my mechanics" videos
Hell of a restoration Bro.👍👍👍
Well done. This vice will likely las another 50 years because of your time and effort.
A paint roller???? And you're so good at everything else!
Ellerine saglik kardesim guzel bir restarasyon calismasi olmus, basarilarin devamini dilerim.
Hello, I liked the sequence of your work to restore the iron vise and this is the logical and practical sequence of removing old rust from rusty iron objects. You have my utmost respect for this wonderful and very beautiful effort.
👨🔧
Did you have the gas on when you were welding the nut back? TIG welders don't usually spark like that.
WONDERFUL, I have no words, always super perfect and unique precise product, wonderful work and video, well done and good luck, respect from old BG. p.s. It is a great pleasure for me to see that there are such precise people in the world, from the White race!!!
🎉
When using electrolysis, try not to use salt. It breaks NaCl bond of salt and form toxic chlorine gas. Baking Soda will work as well with no poison gas.
Now that's some real vice right there.
🤙
Very nice transformation. Thanks for sharing.
Great Job. To improve your TIG welding, hold your TIG torch more perpendicular to your work - think 90 degrees with 20 degrees of tilt or so. The torch heats the material and the rod is to "fill" the void the heat creates.
Rusty boy I will now relate a story I was but a child my father worked in a machine shop we went down one morning early and let ourselves in with a key and we found a guy just completely turned up into a bloody ball and the lady was still running and the reason that the lady got him was because he wore gloves never ever ever wear gloves around rotating Machinery ever no gloves get rid of them no gloves rotating machinery I assume that you have no one there to help you with these things not to criticize you I want to keep you from losing an arm or a finger okay
James is 100% correct. loose the gloves...
В следующий раз пусть оденет руковици что бы точно на мотало на патрон.
@@ФедяФедоров-е8р Asta
@@ronlutman6052 y
Came here for this comment. Lathes are scary business.
why is the finished surface so rough even after all the putty you used (during the priming section)?
Nice work!💪
Very nice work.. it wasn't much to start with but you turned it into a nice addition to your shop...
Thank you for your nice comment 👨🔧
It was Still a Vice ! Though !. Before he Started ! It ! Dick.!
Thanks for the video ....
Why is the lathe making clonking noise? Does it have bad bearings?
I fixed, my lathe is very old and have bad bearings, belt system
Nice job. Referencing the 14 minute mark, you’ll get much better threads and you’re tool will last much longer if after every turn forward you reverse your tap about half to two thirds of a turn to clear your chips. And always use a lubricant. Margarine or even water if that’s all you have but turning threads dry and not clearing your tap is asking for a broken tap stuck in your hole.
First rate work!
Very well done, loved the machinig of new parts Dr G
But ! THOSE ! PARTS ! ARE ! NOT ! ORIGINAL !! THOUGH !!
@@davidwillard7334 Thats Ok with me, he got the job done. Dr G
Nice restoration, but far from PERFECT.. I like the blue color, good video...worth a "thumbs up"!
Maybe. But I’d be very happy to have it in my shop. Remember: Its a vice and not a crystal wine goblet.
@@rong-man1502 So how much are you wanting to buy for one then !??
Not perfect to be sure, but he's only a lad and he is learning by trying rather than most folk here who just watch others do it. It turned out just fine and is a useable tool again. If he could go back and start over, I'm sure he will have learned enough to do a quicker, better job and in a safer way
This was a particularly poorly built vice to begin with and you absolutely made it great! It's better now than it ever was in its life previously! Great work!
Really great work, thanks.
@@davidwillard7334 and film and share.
@@jorgeln3637 SAD ! EDITING ! AND STEALING ! IDEAS ! MORE LIKE !
Nice but i have a question.
Has the inside of the vice sleeve rusted again?
Because when you assembled it it seemed so.
Could you have polished it inside with a wire brush head on a drill?
Or some sand paper?
Just curious, why do you do electrolysis if your just going to sandblast anyways?
2:10 se nota la lectura de 24.7 libras o son 11.2 kilogramos?. Me gustó mucho tu proceso y el resultado final. La marca YUNG seguramente es China, igualmente NO logré encontrar información de ella; de hecho SOLO tu tornillo de banco aparece en google. Seguro es China, la calidad de la pieza es algo burda PERO robusta. Saludos¡¡¡
أنا مشترك جديد من العراق واحب اعمالك الرائعة
good job men👍❤️
Gold job
Electrolysis didnt really seem to do much - might be worth using baking soda in future. Probs wouldve been a good shout to wire brush all the loose crap off it first, looks like thats mostly the loose debris floating to the surface. Im also fairly surely TIG isnt supposed to spark like that... but you did a good job with what seemed to be a fairly low/mass production vice. Also tap with 2 hands, 1 hand is how you break it and spend an afternoon swearing at it. Speaking from experience here 😂
God bless you. Please don't wear gloves when using lathe and other tools that can grab. EXTREMELY DANGEROUS. Stay safe friend and excellent work.
Cool object, well done.
Harbor Freight sells an air tool called a Needle gun would have helped getting heavy rust off. We used them in the military to remove the rust you had on the vice. Then you could use the electrolyzes to get the rest of the rust off.
Отличная работа!!!
I enjoyed the video. My only complaint is that you cut footage of the sandblast.
Awesome job!!!!
Excelente trabalho.
I agree with filling nicks and dings from use but I really don't appreciate those restorers that make the entire casting smooth like it had never been used and now looks likes its made of plastic. It takes away from it natural beauty. Thank you for sticking with the G code.
what did you use to blacken the jaws?
Burned 10w40 Motor oil
PAINT !
Podim wheels look pretty stout, how long do they last
Can you tell me what manufacture and color of paint you used?
Dewilux Hammershlag 431-4297-10 It looks like the Marshall Hammerite series.
Paint ! Paint !.
Elinize sağlık
Tal vez no seas un buen soldador, pero si sabes manejar un torno. Como que usaste una esmeriladora en lugar de tornear???
Bellissimo restauro, complimenti 🙂👍
Ma per lavorare al meglio, la base della morsa deve appoggiare completamente sul piano di lavoro.
I think you put a lot of work into it. The end product could be a little cleaner. But keep up the great work.
You also should never run a reamer backwards because it will dull it.
You should have created cross-hatch grooves on the jaws.
What is the motorcycle in the background?
Pee ! Wee ! Fifty !
For the love of moses, please look at your lathe that noise can't be healthy!
Problem solved :) You can listen in the new videos.
güzel çalışma olmuş eline sağlık. Türk olduğun için sevindim hep yabancılardan bakıyorum hatta sende gizleme bunu bence
At 19.50........verry trickie what you did. Tapping with a cordless drill.
Oh my god, it makes me scared to imagine how much rust went off this girl during electrolysis. The vice might have lost 500-600 grams easily.
Great job man, thank you!
Is That ! How ! Much ! The ! Vice ! Weighs !?? Then !
I could shed quite a lot of weight and still be fit for work ;
☠️ when you put your gloved hand on the spinning shaft you were risking a grizzly death☠️. I know of too many people killed by garment wraps in PTOs. Be safe.
I scrolled down for someone saying exactly this.
Second this comment.
I enjoyed your video. Restoring the vice to a usable state is an effort. I disagree with the viewers who called it a pig. Perhaps they have never used a vice for it's intended purpose. They are made to hold things to work on sometimes to beat on not to win a beauty pageant. Either way looks good and will last another 50 years. Good job.
🙏🛠
@@davidwillard7334 look at the first post on this video. Patrick Kelly. Not that we need to bring out the pitch forks and torches... but that's where that statement originated.
Ellerine sağlık
I never see anyone using a wire wheel to remove the majority of the rust. Why?
That was a question not a statement
@@jonbottoms8988 Cuz we strive to use useful methods that can be presented as content.
@@RustyBoyCrafts That is not an answer. That’s an excuse. If you were to use a wire wheel first it would remove all the heavy rust. This making the electrolysis method far more effective and faster. So. You would have more content to show viewers. Unless you prefer not to use an angle grinder with a wire wheel. If that is the case. Then just say so. They are dangerous and messy and I’m sure you may not want to wearing respirator due to fine particles of rust being thrown into the air. I was only curious. I could’ve used any answer besides the one you chose to reply with. But it’s your channel and your video project so go with the answer that naked you feel good inside.
@@jonbottoms8988So ! How about you Remove the Rust for Rust Bucket Boy ! Then !??
kardeşim ellerine sağlık başarılar dilerim
Great job on the restoration; and a workshop filled with some excellent tools. It’s always a pleasure to watch something that’s so damaged being brought back to life and almost new. However, if it was me, I think I would have thrown the old vise out and bought a new one. Not one for having patience. But the point is it was an incredible restoration, and very entertaining to watch. Good video.
Stupid comment
Nice job, one vice back in use. On the safety side, gloves on a machine should never bee seen.
NOR ! Should ! Your ! Birthday ! Suit ! HANDS ! EITHER !!
You do beautiful restoration work!
Creo k le faltó mucho para k se le pueda llamar restauración ya k el cuerpo del tornillo, le falto trabajo en todo, en cuanto a palancas y demás accesorios la limpieza y pulido estuvo pasable
First time watching your channel and I must say it won’t be the last I really enjoyed it. Fantastic job the vice looks awesome 😊😊😊👍👍👍♥️
🙏
It was utterly uncomfortable to watch you sanding the pipe in lathe while wearing gloves. Very dangerous.
Ever see that video of the dude that gets pulled into the giant lathe and mutilated to death? Don't watch it
Well done, but I had to watch your vid in double speed..
Somebody use it for a boat anchor in the ocean?
Man that is a crappy vise! It looks like I forged in in the back yard. Nice job working with what you were given.
Looks like a chinesium vise. They are always rough castings once you get the paint off.
Nice 👍🏻👍🏻 🇮🇳 Kuki 23|08|2022 .
14:53 looks like a crack between the jaw and that surface to be milled
I agree any space behind the jaw puts stress on the bolts and on a hardened steel jaw ....... and yet he mills the anvil surface that will in all likelihood get the crap knocked out of it
This vise needs to be cleaned and cleaned till it sparkles failure has no options its the logical way of doing a old stubborn relic !
Shiny is ok if you want it as a paperweight or a doorstop - these tools get a bit of a battering over the years if you use them regularly, not much point polishing for hours or you'd be too scared of dinging it to do any work at all
Wow! 24 litres?