Mini Truck Maintenance: How to Check and Change Your Spark Plugs

How to Check and change the spark plugs in a Suzuki Carry DA63T Japanese Mini Truck. We replace these original ones with NGK Plugs available at your local auto parts store.
We have dozens of other videos on our channel covering various topics of Japanese Mini Trucks or "Kei" Trucks. Whether you are looking to import or purchase a Suzuki Carry or you already own a Daihatsu Hijet, There is sure to be a video to interest you!
Check out our channel here / 4sonsoffroad

[@4sonsoffroad]

Amazon Purchase links for These NGK DCPR7E Spark Plugs (US) amzn.to/2GoPrEk

[@GeorgeDutch]

I didn’t check but would love to see a video of your 2” lift install. Great videos.

[@nickt9968]

Good job on the video as always, I don`t know if you plan to add more maintenance video but these would also be helpfull: Front and rear brakes, engine and cabin air filters, transmission maintenance, differential oil change, coolant replacement. Its better if you can show everything like you did with the sparks plug but if you dont have the time to go in detail just pointing out the bolts to remove and the fill and drain plugs would still be very informative. Keep up the good job.

[@4sonsoffroad]

We did a quick overview video of the drain plugs and oil types a year or so ago. Look back in our videos to find it. Will try to do some more of these basic maintenance videos in the future for sure

[@ChimenyDust]

As a recent mini truck buyer I support this comment.

[@I_Am_Michael]

I am glad your spark wrench got stuck. good chance to show how how get it out. I have needle nose pliers (like you). also, I have used a curved pick to get it out.
very good video dude. wish more sites did videos like this. please keep it up.

[@captainvector]

Another option is to use a locking extension bar

[@da64wlayfstylevlog70]

Good jod. Thank you for sharing your vlog.

[@Femmpaws]

You forgot to use an aluminum base anti seizing compound on the spark plugs threads. It is something you should do anytime you have an aluminum head.

[@4sonsoffroad]

Good advice. Luckily NGK uses an anti-seize metal plating on their plugs for this purpose.

[@Femmpaws]

The anti-seizing plating doesn't always work as it should, I have replaced a few heads over the years because of it. A side effect of using anti seizing compound is it aids in the heat flow of the spark plug.

[@craig2809]

My old man was a A&P Aircraft Mechanic, he used that stuff religiously.

[@Instone09ine]

Brilliant thank you so much😊

[@arminwendt4568]

New to me Hijet ran nice, but lacked power on hills, was grabbing gears like crazy. Put in new plugs, accelerating on grades now. Mini truck no longer sucks!

[@royalracingtechroyalracing6128]

Awesome sauce much love from upstate New York RRTECH

[@larryserieux2826]

Do you have a video on suspension noises and shock mount replacements

[@garynickel648]

Can you please recommend a GOOD shop Manuel for the
Dd51t?

[@Richibald1]

Thanks, interesting video but I'll take your previous advice and stick to fuel injection only ✔️🇨🇦🌞

[@scofab]

The K6A engine in the DA63T *is* fuel injected.

[@aredondo27]

I just got a T-MAG MINI VAN
Is this the same motor package or where do you find parts for these?

[@dogger99]

How often should you change the plugs?

[@jasonwaddell4291]

Love this fromt bumper! Is it custom built and/or available to purchase somewhere?

[@ianrusseladem6752]

what is the correct rpm when in idle ? and with aircon turn on

[@skulloking]

where is the map sensor located?

[@rodelmarcseplon4885]

Can you help me whats the problem of my car we have the same engine k6a, because when I start it in the morning after 2 to 3 minutes the rpm will low then If will drive It will not accelerate properly but If I will wait for 6 to 10minutes before driving It will have no problem please reply I need your help thanks. my car is da64v minivan from japan with k6a fuel injected engine same as yours.

[@VickyKumar-fx9hc]

Suzuki cerry mini truck is verry good sarves car

[@captpaulhaugan]

Does valve lash need to be adjusted on these engines?

[@4sonsoffroad]

This specific engine (K6A) uses valve shims for adjustment. So you check with a feeler gauge and replace with a thicker or thinner shim to bring clearance into spec.
On the previous generation engine (F6A) there is the simple adjustment screw on the valve rocker to adjust to spec.

[@MostaphaChibaTV]

Like 1 🇲🇦👍😊

[@wuwade33]

Hi how can u get the part for this truck ?
and oil filters and any fluids ?

[@4sonsoffroad]

www.4sonsoffroad.com/online-store

[@jeraldnations935]

I tipe in a plug change for a 1994 Mitichibushi 3 cylinder and get Suzuki and everything else

[@VickyKumar-fx9hc]

Com hear lanching india