this just work for reset the oil interval !! however in Q5 also show a phrase that say SERVICE DUE! that phrase won't reset i have been researching at it looks like i need a vag scanner.
This is a very good video. The person is clear and does all the steps needed in a very calm and sequential manner so that even people who have no idea as to how the MMI works can do it. One of the best videos I have seen. I will try it in my A8.
I have another problem with this same car q7audi 3.6 the mm I is blank the radio not working since then is there any other way to operate the mm I to come up
+Richard Brunett I'm not sure .This is what i have for the 2016 A6 .Check you owner manual it may help. Service and RepairService interval display, resetting Connect the vehicle diagnostic tester. Perform the following steps on the diagnostic tester¤Guided Functions ot Guided Fault Finding¤Select brand and type¤Guided functions¤Service workSelect service event Follow the guided program
Thanks for the video... Does this take time to register? I have a 2010 A5 and I just did exactly what you did and though the big screen says the new interval the center display still shows the old information. Same thing on my wife's 2011 A4.
Hi Tom ,The reset should be exactly as show in my video.Try it again and see how it goes.Just so you know there is a tsb regarding a problem with the resetting of the reminder .I will attach a copy for you to see.Let me know how you do.Jim 90 Service request cannot be reset or reappears after short time 90 10 13 2020503/4 August 9, 2010 Supersedes Technical Service Bulletin Group 90 number 09-11 dated August 14, 2009 for reasons listed below. Affected Vehicles CONDITION After performing service work and resetting the Service Display using Vehicle Self Diagnosis, the service reminder reappears immediately or soon after the customer leaves the dealership. TECHNICAL BACKGROUND Worldwide, service items are divided into two groups: those triggered by accrued mileage and those triggered by elapsed time. For customer convenience, North America groups these two kinds of service items together at our published service intervals. For example, both time-related and mileage-related service items are performed at the 15K service. This practice reduces the how often the customer must visit the dealer for routine maintenance. In some other parts of the world, these two categories of service items are treated individually, and are therefore reset individually via separate adaptation channels in the instrument cluster. However, attempting to reset the Service Display via Vehicle Self Diagnosis introduces the risk of not resetting all the necessary adaptation channels for North America. PRODUCTION SOLUTIONS Not applicable. SERVICE When resetting the service interval display, use the Service Work function in Guided Functions or Guided Fault Finding. This method will ensure that all necessary adaptation channels are reset. WARRANTY This TSB is informational only and not applicable to any Audi warranty. ADDITIONAL INFORMATION All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.
jimthecarguy Thanks for the reply Jim. I think I've mistaken the service interval reminder with the oil change reminder - although the display seems to indicate it's one in the same. My center display says, "Service in 700 miles, 11 days". I've done some research and it seems the only way to reset it is with the VAG-COM or RossTech - which the tsb in your reply seems to suggest. I'm gonna try it tomorrow with the RossTech and reply here with my findings for everyone. Thanks again, we need more people helping each other out!
+Savannah dEE This is the procedure for your car.Let me know how you do.Jim Insert key into ignition Push in the service button (with the crescent wrench icon), just left of the odometer reset button, hold it in, and turn ignition ON without starting engine. The display should read either "SERVICE IN ????Miles" or "Service!" if it does not, repeat steps #1 and #2. To reset, push and hold the odometer reset button until you see "SERVICE IN --- MILES --DAYS" or "SERVICE!".. Turn the ignition off. If done correctly, when the ignition is turned back on, the "Service!" reminder will not show.Note: Perform step #4 before the "Service!" message disappears and changes to the usual message about holding the brake down while shifting out of Park. Do not reset the display between service intervals. Doing so will result in an incorrect display. The service display information will remain intact even if the battery is disconnected. If a priority 1 malfunction is detected (red symbol), you cannot display the distance remaining.
You should change the title to “Reset oil change interval”. This method does not reset the “Service due” indicator.
Only do this if you have just changed your oil or had it serviced. You don’t wanna miss a change!
Dear jimthecarguy: do you know how to reset the "SERVICE DUE" message?
+Kiko Issa That's what I want to know.
Me too!
Me too!!!
Kiko Issa me too!!!
You need a special tool from AUDI to reset it
that is self explanatory - anyone know how to reset " service due" indicator?
this just work for reset the oil interval !! however in Q5 also show a phrase that say SERVICE DUE! that phrase won't reset i have been researching at it looks like i need a vag scanner.
amehd pena donates f
'
I have a 05 Audi S4 that has enough of the right weight of oil, but the oil pressure symbol keeps coming on.
Thank you!!
This is a very good video. The person is clear and does all the steps needed in a very calm and sequential manner so that even people who have no idea as to how the MMI works can do it. One of the best videos I have seen. I will try it in my A8.
Casimiro Izquierdo Thank you for your kind words and your feed back.
I tried this and it did not work
I tried it on my a6 it didn't work
It’s not working
Thank you
q5
thanks dude...
I have another problem with this same car q7audi 3.6 the mm I is blank the radio not working since then is there any other way to operate the mm I to come up
easy enough , what if there is no reset alternative? Audi a6 2008 2.8 SFI
Thank you so much!!
You're welcome!
For 2010 Audi A4 . What kind of tools used for reset service due ?
What was ur oil level when u reset it?
I have a 2009 Audi A6. I can't figure out how to do mine? Can you help
Can u make a vid for Audi q7 oil life reset????
Yes as soon as I get one into my shop I will.
Thanks a mil...
Hello sir I have a question bout the esp sign on 2009 Audi Q7
does anyone knows how to reset it for a 2008 a6 quattro 3.2
Jim, we just bought a 2016 A6 and I changed the oil. Is the procedure to reset the "change oil" message the same as the video for a 2014????
+Richard Brunett I'm not sure .This is what i have for the 2016 A6 .Check you owner manual it may help.
Service and RepairService interval display, resetting
Connect the vehicle diagnostic tester. Perform the following steps on the diagnostic tester¤Guided Functions ot Guided Fault Finding¤Select brand and type¤Guided functions¤Service workSelect service event Follow the guided program
i have an Audi q7 2010 is the same ???
How do you do it if you’re radio doesn’t work?
Thanks for watching.
I keep doing it and mine doesn't reset 😕
Thanks for the video... Does this take time to register? I have a 2010 A5 and I just did exactly what you did and though the big screen says the new interval the center display still shows the old information. Same thing on my wife's 2011 A4.
Hi Tom ,The reset should be exactly as show in my video.Try it again and see how it goes.Just so you know there is a tsb regarding a problem with the resetting of the reminder .I will attach a copy for you to see.Let me know how you do.Jim
90 Service request cannot be reset or reappears after short time
90 10 13
2020503/4
August 9, 2010
Supersedes Technical Service Bulletin Group 90 number 09-11 dated August 14, 2009 for reasons listed below.
Affected Vehicles
CONDITION
After performing service work and resetting the Service Display using Vehicle Self Diagnosis, the service reminder reappears immediately or soon after the customer leaves the dealership.
TECHNICAL BACKGROUND
Worldwide, service items are divided into two groups: those triggered by accrued mileage and those triggered by elapsed time.
For customer convenience, North America groups these two kinds of service items together at our published service intervals. For example, both time-related and mileage-related service items are performed at the 15K service. This practice reduces the how often the customer must visit the dealer for routine maintenance.
In some other parts of the world, these two categories of service items are treated individually, and are therefore reset individually via separate adaptation channels in the instrument cluster. However, attempting to reset the Service Display via Vehicle Self Diagnosis introduces the risk of not resetting all the necessary adaptation channels for North America.
PRODUCTION SOLUTIONS
Not applicable.
SERVICE
When resetting the service interval display, use the Service Work function in Guided Functions or Guided Fault Finding. This method will ensure that all necessary adaptation channels are reset.
WARRANTY
This TSB is informational only and not applicable to any Audi warranty.
ADDITIONAL INFORMATION
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.
jimthecarguy Thanks for the reply Jim. I think I've mistaken the service interval reminder with the oil change reminder - although the display seems to indicate it's one in the same. My center display says, "Service in 700 miles, 11 days". I've done some research and it seems the only way to reset it is with the VAG-COM or RossTech - which the tsb in your reply seems to suggest. I'm gonna try it tomorrow with the RossTech and reply here with my findings for everyone. Thanks again, we need more people helping each other out!
Thank you so much. Took my car to a place to have my oil changed today however they weren't able to reset my oil level.
thank you for watching and your input.I'm happy to help.
This works in 2012 Q5??
A million thanks..greatly apreciate you posting this video.
Happy to help.Thanks for you feed back .Jim
Will this work for 07 Q7?
Thank you. So once you reset the "Service Now!" Does the computer automatically calculate the next service interval at the next 10,000 miles?
Yes it will
Fernando Carrillo but how do u reset the inspection
Randy Oudit I had to buy the Valcom tool to clear the "Service due" reminder. Valcom resets it to the next 10,000 interval.
Thank you
Much thanks bro, it's really works! Greetings from Puerto Rico.
😎🇵🇷
+SilviaDrift King I'm happy to help.I wish I was in Puerto Rico now it is still cold up here in New Jersey
+jimthecarguy here is a good wheater lol, hope to see you one day! :)
+SilviaDrift King Thank you take care.
Thanx JIM IT WORKS IN MY Q7...
Happy to help
thank you
Will this work for 07 Q7?
Did you figure this out?
G.
Thank you for watching. Watch for the next free tool giveaway coming soon.
Thank you👍🔧🔩
Lone Star Auto Thanks for watching!
very helpful men 👍
Rename ur video nowww or upload how to reset service due!
Great Work,thanks for the post. don't need to improve on anything!
Thank you for you positive feed back.good luck
I have 2008 and it is different. Can't figure mine out
+Savannah dEE This is the procedure for your car.Let me know how you do.Jim Insert key into ignition
Push in the service button (with the crescent wrench icon), just left of the odometer reset button, hold it in, and turn ignition ON without starting engine. The display should read either "SERVICE IN ????Miles" or "Service!" if it does not, repeat steps #1 and #2. To reset, push and hold the odometer reset button until you see "SERVICE IN --- MILES --DAYS" or "SERVICE!".. Turn the ignition off. If done correctly, when the ignition is turned back on, the "Service!" reminder will not show.Note:
Perform step #4 before the "Service!" message disappears and changes to the usual message about holding the brake down while shifting out of Park.
Do not reset the display between service intervals. Doing so will result in an incorrect display.
The service display information will remain intact even if the battery is disconnected.
If a priority 1 malfunction is detected (red symbol), you cannot display the distance remaining.