👍 This video helped me bigtime! Not because the advice worked.. but because I found someone’s comment in here with a different method to try and it worked easy asf! 😂 He said to put scissors in the airflow and twist. I actually put needle nose pliers in the airflow and did it, easy asf. I couldn’t get the pliers to work with the method on this video but it should work for some people. Try the airflow with scissors if the video advice doesn’t work!
Bro this has helped me so much with my Chronus Sigelei shikra these vapes are having loads of problems with jammed tanks thank man so much for the help.
I have a different problem. My tank is cross threaded and will not come out. It spins and nothing I do will get it to read the atomizer. Does anyone know if there is a repair kit for an IJoy avenger 270? Or did I just screw up my entire MOD and have to throw it out and spend a lot of money to get a new one
The way to do it without pliers is to twist the top until the coil is screwed extra tight and then turn counter clock-wise and the base will come out. You might have to use pliers to get the coil out but that is way easier than getting the base off with pliers.
If the tank is stuck to the mod 510 connector take two razor blades on each side underneath the tank and place them against the 510 connector. Hold them really snug/tight and unscrew from the base. Will work after a few try’s if your tank is stuck to your mod and keeps spinning
Idk if anyone said this but I throw mine in the freezer for a bit. The metal molecules move less thus they take up less space making them contract a bit. Basically it makes it so u can twist it off. Def don't try twisting it when it's hot from vaping. It's a lot harder.
That's a fantastic video. I spent a whole day trying to get the tank off but was unsuccessful. I watched this video and I had the tank off within minutes. Thank you so much.
adjustable pliers are ideal for this or put something hard in the air holes and try too unscrew,put it in the fridge for some time wd-40 on the 510,giwe it to someone who has more "power" in hands,there are lots of methods and why didnt you dissassembly the atomizer before doing that the glass could be easily broke there should be some kind of rubber put instead of paper glad you made it in many cases the 510 slot dont survive this(sorry if bad english)
I can't take my tank off my mod.. Which brought me here.. Same thing happened to me. I tightened it a little too much now it won't come off 👎🏽 I twist and twist but it just won't come off
SteffMysterVideos literally no one answers this fucking question and it’s pissing me off. I’ve looked everywhere and people just keep talking about it being too tight, mines just keeps spinning and won’t come off. 🤦🏾♂️
So I have a smok stick v8 baby and the top part where you can and juice is stuck and I'm trying to clean it because there is alot of old juice stuck in it and I've used everything and I've tried everything and it's still stuck so idk what to do and by the part that you add juice too I mean like the part that has a magnet that connects to the bottom part not the actually cap to add the juice
My main issue is the lid on top of the tank and the airhole adjuster both keep twisting instead of the jammed base, so I just tape the pesky things I don't want to unscrew and voila, no more jam.
What if the ring dont want to come off?? On my mod the ring dont want to come off no matter what I do I was trying to change the coil and clean my pieces and was going to clean the ring but it wont come off😭😭 am I gonna have to buy a new one??
Rusty old pliers? Aw, gawd, no! I was cringing all while you were using those! 😖 Gas pliers in a pinch, but ideally, you want a mini strap wrench; they're dirt cheap and sold everywhere, even the types they do for opening jars for people with hand issues, but never pliers. _"bigger tank to make bigger clouds, that's what us vapers love to do"_ 🙄🤦♂
Easier method would be using the nail cutter specifically just the nail file which is attached to the nail cutter..twist it from the airflow..it works easy and it's safer
Dude you saved me!!! Worked like a charm!! I tried for hours to get my tank off. I tightened it after I put the lid on too. Thank you 🙏🏻!!!!!
btw if it allows it, the easiest way to do this is to stick a small knife in the air hole, you get aton of grip and its super easy to untwist
I knew I should have done this the first time around but it took me watching this video to learn the hard way. Thanks man.
Bro without this video, I could have thrown my vape. THANKS!
Lmao!!!! Seriously you needed a video to learn common sense? 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I been using this videos since I was 12 years old an it has always worked for me , hope everbody vapes are okay keep vapin.
👍 This video helped me bigtime! Not because the advice worked.. but because I found someone’s comment in here with a different method to try and it worked easy asf! 😂
He said to put scissors in the airflow and twist. I actually put needle nose pliers in the airflow and did it, easy asf. I couldn’t get the pliers to work with the method on this video but it should work for some people.
Try the airflow with scissors if the video advice doesn’t work!
Just stick 1 fork of a pair of tweezers in the air slot and twist. Way easier
Bro this has helped me so much with my Chronus Sigelei shikra these vapes are having loads of problems with jammed tanks thank man so much for the help.
Thank you. I couldn’t figure out how to get mine off. This freaking works and it didn’t take much force to unscrew it.
My dumbass used my teeth on the tank and cracked the glass
@@outbreak2465 LMAO HOW DID YOU DO THAT
way easier method stick some scissors in the airflows of the tank and twist the scissors worked for me better than this method
RC SPORTS this comment is extreme under rated 💯
I tried absolutely everything and THIS WORKED. I said a lil prayer for u 💙
I have a different problem. My tank is cross threaded and will not come out. It spins and nothing I do will get it to read the atomizer. Does anyone know if there is a repair kit for an IJoy avenger 270? Or did I just screw up my entire MOD and have to throw it out and spend a lot of money to get a new one
@@darrellgaribaldi2689 if you don't need the base, try to get the airflow ring of, than try to unscrew it
same
thanks bro the tank was stuck for 4 months you saved me
Unreal. You just got me out of a very tight spot bro - very grateful for that.
BRO THANK YOU SO MUCH IVE TRIED WITH PLIARS BEFORE AND IT FUCKED UP MY TANK BUT WITH THE PAPER TOWEL IT DIDNT ILYSM
The way to do it without pliers is to twist the top until the coil is screwed extra tight and then turn counter clock-wise and the base will come out. You might have to use pliers to get the coil out but that is way easier than getting the base off with pliers.
This totally worked to release the jam I had with my glass to the coil! Thanks!
If the tank is stuck to the mod 510 connector take two razor blades on each side underneath the tank and place them against the 510 connector. Hold them really snug/tight and unscrew from the base. Will work after a few try’s if your tank is stuck to your mod and keeps spinning
Wish i saw this comment before i basically ripped my mod apart😥
T-5 torx screwdriver or bit and take apart, unscrew tank and jb weld or glue it from spinning and wont happen again.
Thank you so much this was a lifesaver I couldn’t figure out why I couldn’t get my atomizer back on lol yes this was my first time changing it.
Thx dude, you save me!
Idk if anyone said this but I throw mine in the freezer for a bit. The metal molecules move less thus they take up less space making them contract a bit. Basically it makes it so u can twist it off.
Def don't try twisting it when it's hot from vaping. It's a lot harder.
That's a fantastic video. I spent a whole day trying to get the tank off but was unsuccessful. I watched this video and I had the tank off within minutes. Thank you so much.
adjustable pliers are ideal for this or put something hard in the air holes and try too unscrew,put it in the fridge for some time wd-40 on the 510,giwe it to someone who has more "power" in hands,there are lots of methods and why didnt you dissassembly the atomizer before doing that the glass could be easily broke there should be some kind of rubber put instead of paper glad you made it in many cases the 510 slot dont survive this(sorry if bad english)
just carefull i did this with my old broken vapes and i tried to open them but the tank cracked instead so be real carefull
I got it but my glass broke luckily I have a spare
I CANNOT STRESS THIS ENOUGH THANK YOU THANK YOU THANK YOU
Thank you so much bro
I can't take my tank off my mod.. Which brought me here.. Same thing happened to me. I tightened it a little too much now it won't come off 👎🏽 I twist and twist but it just won't come off
SteffMysterVideos literally no one answers this fucking question and it’s pissing me off. I’ve looked everywhere and people just keep talking about it being too tight, mines just keeps spinning and won’t come off. 🤦🏾♂️
same did you guys find a fix ?
Me too this is bullshit
I wrap the base of my tank with rubberbands. Then I use my hand to twist it off. No tools needed.
omg i need to try this
I just want u to know u just saved my life
With my OBS Vape I can’t remove the glass as it seems stuck, what do I do?
My itank keeps blasting when i start to firing it , can u help to fix it?
Omg I when this happened to me 😭 now I can get it loose thanks so freaking much dude 😂
What about an atomizer that got stripped inside a mod and just spins either direction? Am I screwed?
Thank you so much I thought of the pliers but didn't want to scratch it and I was working with delta 8 so I didn't think about napkin guard
Rubber bands work easier than a paper towel for "this method" but thanks so much
My tank turns left and right contstantly, cant unscrew it at all. Any help?
Mine too, did you fix it
Mine too
stick some sccisors in the airflow and turn the sccisors
@@rcsports5793 that worked like a charm... actually used a flat head screwdriver
@@stellasmammacita9028 glad to help bro
You're a lifesaver, bro. God bless you!
this video was a life saver! thanks for making the video
How would you recommend avoiding this problem in the future? Not tighten the mouthpiece too much? Or take the whole tank off when refilling?
you are a life saver
So I have a smok stick v8 baby and the top part where you can and juice is stuck and I'm trying to clean it because there is alot of old juice stuck in it and I've used everything and I've tried everything and it's still stuck so idk what to do and by the part that you add juice too I mean like the part that has a magnet that connects to the bottom part not the actually cap to add the juice
I've cut open my finger 4 times trying to get the tank part off so I give up
My main issue is the lid on top of the tank and the airhole adjuster both keep twisting instead of the jammed base, so I just tape the pesky things I don't want to unscrew and voila, no more jam.
My vandy vape pulse rda got stuck in my vgod elite mech, i did it like this way and it worked perfectly thanks 🙏
My bottom airflow is twisting thats why I can't unscrew overtightend chimney
Now how the hell do you remove the glass. The airflow thing is too tight shit won't even come off.
You've discovered a method?
Do u know how to change glass in voopoo maat tank new?
I got mine off in literally 1 sec after it being stuck for awhile just make sure its above the airflow and below the glass
What about if it tank keeps twisting ? Doesnt wanna come off at all
What if the ring dont want to come off?? On my mod the ring dont want to come off no matter what I do I was trying to change the coil and clean my pieces and was going to clean the ring but it wont come off😭😭 am I gonna have to buy a new one??
BROOO,It work,you saved my life thank's!👋
I tried that but the vent door turned and got stuck.
Make tank will not come off the batterie mod it will turn left and right but the tank wont tighten down or come off any help would be great
I was your 100th sub keep up the good work
Rusty old pliers? Aw, gawd, no! I was cringing all while you were using those! 😖
Gas pliers in a pinch, but ideally, you want a mini strap wrench; they're dirt cheap and sold everywhere, even the types they do for opening jars for people with hand issues, but never pliers.
_"bigger tank to make bigger clouds, that's what us vapers love to do"_ 🙄🤦♂
Thanks for the help it happened to me and it was to slippery I didn't know what to do
Just tape the tank and base together then turn it like normal worked for me
Thanks. That helped me fix my vape
I have the snow wolf mod and I try to open the tank so I can replace the coil but it's just turns left and right back n forth I need help...
Thanks buddy!! saved me some pain in my hands!👍👍
Thanks I appreciate your help
Easier method would be using the nail cutter specifically just the nail file which is attached to the nail cutter..twist it from the airflow..it works easy and it's safer
My dumass forgot to get a paper towel and cracked the tank but luckily i had a spare
ty just broke my vape, a little pressure and the glass broke, and this is not a cheap shitty one btw
I have an RDTA fuel and I can't get it off if I try to take it off my atomizer just turns left or right but not getting off
Kristian Myles this is the same with mine it doesn’t tighten either it’s stuck on but it won’t come off or tighten
THANK YOU! Awesome video and very helpful
Thank you so mutch
i’ve tried it’s not working nothing is
Or you can just wrap a shoelace around the whole tank and twist
i can't get the top to open,, i push and turn but no way grrrr
Absolute legend! Thx u :3
Mine just keeps turning am I ducked?
I'll just have my dad take mine off o don't wanna break it lol
My nigga
I tried doing it with my teeth then you know what happen I break the glass f and have a bruises on my hand because of the glass now I can't vape😭
Use vice grips makes it a lot easier but with the paper towel!
i crakced my tank while trying to do this fml
Same
Nice one brother thank you
LOVE YOUR RIP TUPAC TEE GOT THE SAME ONE…!! ♥️”Tupac”♥️
It works because I just got my tank from being jummed from my mod
My airflow justf turns and turns can't get it off
Tk Omega me too
Stick a key all the way through where the coil is and twist
stay golden pony boy : Using a key worked; thanks for the tip!!
@@staygoldenponyboy3852 trying it now...very smart
Did u put a key through the air flow?
Very easy to crack your tank like this
Thank you 😊 you helped
I cant get the glass to come off! The whole tank is so tight! Help!
Put the glass in hot water and it will come off easy but don't get you mod wet just the glass
Fuck this tank issue. People should avoid these vapes with tanks. I should have bought vape that uses cartridge.
Rip... im using a rda
We have the same problem. We need some help
@@unbrokendawn757 me too btw
My air flow chambers are on the top....
Holy fuck. I got it off and it's been on there for months
well, you saved me, ty
Mine is literally just spinning like it's not stuck what do I do
Same
Mine is stuck on my I priv
i tried this method and i broke the glass
KillSwitch take it apart first 😂 i took apart everything except for the bottom that was stuck
Mine is literally stuck to the charger
Thank you so much dude this video helped a fucking lot
That is what the RUBBER VAPE BANDS are for!
This helped me a lot thank you
Thanks DAD I LOVE YOU🖤🖤
Can somebody help me out...i accidentally dropped my brothers vape..he tried to fix it but still not working
Thanks, working perfectly :)
Gotta be pretty dumb to need a youtube video to figure out how to unscrew something.
Fuck yeah dude keep checkin those hefty vape clouds! Peace. Love. Respect. #CloudChasingLyfe
I shattered my tank 😂
Naw, just stick a fork prong in the airflow channel and turn the tank off.