I built my simple starter T-Trak oval 15 years ago using 1 inch blue foam. I went with 12 inch square single modules with the 18 inch corners. On Christmas day a friends wife bet i could not build a layout at all. I took her on. I built the six module simple oval and had it running on her living room coffee table New Years day. This was a completely layout with scenery. I had had a head start, i had been collecting and building structures for several years. The modules took a day and a half build and let the glue dry! I know have a twin junction three loop layout measuring 20 ft x 54 inches.
This video finally gave me the nudge I needed. I finally went ahead and started building some T-Trak modules over the past few days. Been interested and intrigued by T-Trak for a few years now, but never got round to actually doing anything (except film a few layouts at shows). Now that I have started actually building some modules, I think it is going to be a fun venture for me. And who knows? I may even bring a couple modules to a show sometime.
I hope this video gets some new folks interested in T-Trak. I have been building T-Trak modules for over 3 years and have used mainly module kits from Masterpiece Modules as he uses the best quality wood and he produces the most consistent units.
Thank you for this simple and straight forward explanation on how to make a N scale T-Trak module. I am going to use the rules to make a traveling layout.
Hi Jimmy, nice to see T Trak being covered on your channel. I started off with just a simple oval on a folding table and slowly expanded as I got a larger space. Not for everyone but it's suits my purpose. John
Noted you used "luan" wood for the deck piece. Is that preferred over using thin plywood 'good-one-side"? I use Kato in HO scale, so what is the centre's for track alignment? Interesting idea for small quick projects where you can really change scenes. Thanks for the video. Will you be doing one as you finish it?
So thats T track they use the kato type track. I've heard of it but had no idea what it was about. Most of the fellas I know build for N-trak. I guess Brooklyn N-trak still does, it's been years ago since I seen anyone the Brooklyn N-trak. I had seen Ron show off free mo that looked interesting. Anyway this was a good video. It reminds me of sone guys building scenes so they can photograph there models.
I have to agree with you on that. I put glue on my connectors and unfortunately I had to adjust some of my layout… not a nightmare, but it was really bad…
I found that very interesting. I keep going back so I could Wright down measurements. Looks like fun. I have Bachman EZ track so will look up that track to make T track module's. Thank you for that DIY show and tell. GOD BLESS 🚂💖🚂💖🚂💖
One problem with using EZ Track for modules: if you're building actual T-track modules to be used with other T-track modules rather than just using the standard for your own sectional layout, you _have_ to use Kato Unitrack at the point where your module joins with other modules. The track you use between the two modules doesn't matter, so if you still want to use EZ Track within your module you can, but the Unitrack joiners at the module ends are mandatory.
Interesting. N-trak struck me as needlessly over complex, this system seems more straight forward now I"ve had a look through the specs and wiki. Might be useful even here at home as mix and match modules for the deck in summer. Why T? N-trak I understand, but the T means nothing, other than that you are using T connectors for the leveling feet. Is it that it is table top rather than free standing? that's one thing that makes it easier to build than other standards.
I’ve thought about building an N trak module. There’s a lot of clubs in my area that have that standard. That gnat in your mouth had me dying 🤣 we have mosquitoes and blackflies like crazy up here in Canada 🇨🇦
I built my simple starter T-Trak oval 15 years ago using 1 inch blue foam. I went with 12 inch square single modules with the 18 inch corners. On Christmas day a friends wife bet i could not build a layout at all. I took her on. I built the six module simple oval and had it running on her living room coffee table New Years day. This was a completely layout with scenery. I had had a head start, i had been collecting and building structures for several years. The modules took a day and a half build and let the glue dry! I know have a twin junction three loop layout measuring 20 ft x 54 inches.
This video finally gave me the nudge I needed. I finally went ahead and started building some T-Trak modules over the past few days. Been interested and intrigued by T-Trak for a few years now, but never got round to actually doing anything (except film a few layouts at shows). Now that I have started actually building some modules, I think it is going to be a fun venture for me. And who knows? I may even bring a couple modules to a show sometime.
I hope this video gets some new folks interested in T-Trak. I have been building T-Trak modules for over 3 years and have used mainly module kits from Masterpiece Modules as he uses the best quality wood and he produces the most consistent units.
Thank you for this simple and straight forward explanation on how to make a N scale T-Trak module. I am going to use the rules to make a traveling layout.
Hi Jimmy, nice to see T Trak being covered on your channel. I started off with just a simple oval on a folding table and slowly expanded as I got a larger space. Not for everyone but it's suits my purpose. John
Using a Sharpie to make your markings, now that’s confidence. Great video!
I am going to need a couple of those straight sections to join my modules.
Went to my local club today, they run Ttrak. I am an instant convert.
PERFECT! Just what I was looking for! Thanks!
Welcome to Ttrak!
Can you 3d print a spacer to help locate the track in the right spot?
I’ve started buying stuff to do a layout but have been debating using a door or doing the T-Track. This is the video I’ve been needing to see
Hiw do you attach them together?
How about how to put legs on them, or do they just sit on a table?
Also, how to connect them together?
Noted you used "luan" wood for the deck piece. Is that preferred over using thin plywood 'good-one-side"? I use Kato in HO scale, so what is the centre's for track alignment? Interesting idea for small quick projects where you can really change scenes. Thanks for the video. Will you be doing one as you finish it?
Now jimmy are you going to do the entire module so we may see it finished. Very interested
You know me too well!
Kato track 20 030 is for 64mm code 20 040 is for a 62 mm
So thats T track they use the kato type track. I've heard of it but had no idea what it was about. Most of the fellas I know build for N-trak. I guess Brooklyn N-trak still does, it's been years ago since I seen anyone the Brooklyn N-trak. I had seen Ron show off free mo that looked interesting. Anyway this was a good video. It reminds me of sone guys building scenes so they can photograph there models.
Interesting Jimmy but I would not put glue on the joiners. Not criticism just an opinion…
I have to agree with you on that. I put glue on my connectors and unfortunately I had to adjust some of my layout… not a nightmare, but it was really bad…
You didn't provide the 2mm overhang needed to allow connection with other modules, I learned the hard way about the need for the slight overhang
I found that very interesting. I keep going back so I could Wright down measurements. Looks like fun. I have Bachman EZ track so will look up that track to make T track module's. Thank you for that DIY show and tell.
GOD BLESS 🚂💖🚂💖🚂💖
One problem with using EZ Track for modules: if you're building actual T-track modules to be used with other T-track modules rather than just using the standard for your own sectional layout, you _have_ to use Kato Unitrack at the point where your module joins with other modules. The track you use between the two modules doesn't matter, so if you still want to use EZ Track within your module you can, but the Unitrack joiners at the module ends are mandatory.
@@VestedUTuber Thank you for letting me know because I did not know that. Great info to have.
GOD BLESS 🚂💖🚂💖🚂💖
Thanks for showing that Jimmy. I hate to admit it, but I'm not familiar with what T-track modules are, and I'm still not sure what the "T" designates.
I have been told the t is for “table”
Nice update today like it very much.
Bippidi Boppidi... hahaha
Finally a train video my wife might see a benefit to.
Help me out here Jimmy. So the module connection is for different layouts? Or do you build them like LEGO’s? Piece by piece?
its more akin to legos, everyone brings a small module to put together to make a big layout.
@@ChunkyMonkeyYT okay, I get it… bring your module to connect with other. Sounds pretty cool.
do you have a cults3d or myminifactory for all the model you made for purchase somewhere?
Why wouldn't u do a small foam insert
Interesting. N-trak struck me as needlessly over complex, this system seems more straight forward now I"ve had a look through the specs and wiki. Might be useful even here at home as mix and match modules for the deck in summer.
Why T? N-trak I understand, but the T means nothing, other than that you are using T connectors for the leveling feet. Is it that it is table top rather than free standing? that's one thing that makes it easier to build than other standards.
The T is for Tabletop, the modules are assembled into a layout on folding tables.
Masterpiece Modules is no longer offering T-trak kits, unfortunately, as of recently (~October 2022).
Did you mean 10 wood screws
I’ve thought about building an N trak module. There’s a lot of clubs in my area that have that standard.
That gnat in your mouth had me dying 🤣 we have mosquitoes and blackflies like crazy up here in Canada 🇨🇦
I hate Grits,
Me too
I am Gonna Stay with the The Original Way. Thanks but No thanks.