Mate! You have saved me a fortune! Thanks for this video, I just recently been having problems with my airbag light staying on but haven't had a collision or anything but when I saw you looking in your fuse box and noticed you also had one of those fuse piggyback set ups installed I wondered if that's what could be causing my problems. Mine was installed for a dashcam and recently the dashcam has been intermittent in its operation but strangely enough that's when I've started getting the airbag light problem too, so I've removed it now and all my fuses seem ok, switched on my ignition and "YIPPEE " the light is now going out as it should! Thanks tons, if I hadn't seen your video I wouldn't have connected the 2 possible faults. In my case the piggyback device was the problem 👍👍👍😀
It fixed it! My blower wasn't working and the airbag light was on. Blower works and the light is gone! The weird thing is the fuse wasn't even blown...
I'm going to check thank you I have a 2005 Buick LeSabre and the seat for the heat does not work I checked the fuse for that and it pays to be okay but the next time the red light stay on and I have to check to see if that's a fuse
our 07 GMC classic had the solid airbag/seat belt light on and the rear view mirror display was out that has the passenger presence and outside temp...only a blown fuse under the hood
hey man I'm going to look at an 01 3.0 4x4 ranger auto and knowing you have been a ranger man i thought id ask what major things i should look for? I've been a chevy guy for a few years so this is all new to me if you could help me out!
motomanjf Common problems with that year are the vacuum hubs not working and the timing chain cover gasket going bad. The gasket is not terribly difficult to replace but it will leak coolant if it's bad. The vacuum hubs can also be a pain, but if 4x4 isn't working that's the problem a lot of the time
Hey Kyle, you need to do this 5 times: Turn car to acc on. As soon as the light goes off (starts to blink) turn car to off. Turn to acc on. Repeat. After the 5th time, let it blink. It'll blink once slowly, that's a 1. Then it will blink quicker, count the times. If it blinks 1 long blink, then 3 blinks, thats a code 13.
Hey I've got a 02 Ranger I was installing LED dash light and when I put it together my airbag light hasn't worked I've check the bulbs and connection. It's setting a chime off ALL the time stops for about a minute then chimes again any ideas ?
Need a little help I bought a project truck a few weeks ago an there was no fuse for the bag so the light is on and I don't know where to start with that
Mate! You have saved me a fortune! Thanks for this video, I just recently been having problems with my airbag light staying on but haven't had a collision or anything but when I saw you looking in your fuse box and noticed you also had one of those fuse piggyback set ups installed I wondered if that's what could be causing my problems. Mine was installed for a dashcam and recently the dashcam has been intermittent in its operation but strangely enough that's when I've started getting the airbag light problem too, so I've removed it now and all my fuses seem ok, switched on my ignition and "YIPPEE " the light is now going out as it should! Thanks tons, if I hadn't seen your video I wouldn't have connected the 2 possible faults. In my case the piggyback device was the problem 👍👍👍😀
Hey Bob, glad the video was helpful! Make sure to give it a thumbs up and share :-)
Already liked and shared bud, thanks again my light is still out everything is working perfectly! 😎👌
+Bob Willis Thank you Bob, I appreciate that very much!
It fixed it! My blower wasn't working and the airbag light was on. Blower works and the light is gone! The weird thing is the fuse wasn't even blown...
I'm going to check thank you I have a 2005 Buick LeSabre and the seat for the heat does not work I checked the fuse for that and it pays to be okay but the next time the red light stay on and I have to check to see if that's a fuse
Sorted....well done. Another easy fix, bit of tape over the light lol.
That's one way to fix it!
Snorted too. Still burns but here comes THR DRIP!!
Yeah. My wife used white out on the computer screen with the same results!!
You have a ground issue in one of your rear doors I know this is old but that’s the issue very common
A super good video. Information was on the money. Ford wanted $90.00 for the same fix. Screw them.
Hello!I do not have such a sigh,but only when someone is sitting in the passenger seat "AIRBAG IS ON".Has to be ON or OFF
our 07 GMC classic had the solid airbag/seat belt light on and the rear view mirror display was out that has the passenger presence and outside temp...only a blown fuse under the hood
Nice! Glad it was an easy fix
Chris are you from the Pittsburgh, Pa area? I'm hearing a familiar accent.
hey man I'm going to look at an 01 3.0 4x4 ranger auto and knowing you have been a ranger man i thought id ask what major things i should look for? I've been a chevy guy for a few years so this is all new to me if you could help me out!
motomanjf Common problems with that year are the vacuum hubs not working and the timing chain cover gasket going bad. The gasket is not terribly difficult to replace but it will leak coolant if it's bad. The vacuum hubs can also be a pain, but if 4x4 isn't working that's the problem a lot of the time
Enjoy your videos...I was totally expecting a piece of black tape...
+Jarrod Abel Haha, that's funny! Thanks for the comment and for watching my videos!
Mine had been soild for a long time, now I noticed it is blinking now..how do you count them codes off of it blinking?? Any ideas..great video!
Hey Kyle, you need to do this 5 times:
Turn car to acc on. As soon as the light goes off (starts to blink) turn car to off. Turn to acc on. Repeat.
After the 5th time, let it blink. It'll blink once slowly, that's a 1. Then it will blink quicker, count the times. If it blinks 1 long blink, then 3 blinks, thats a code 13.
Hey I've got a 02 Ranger I was installing LED dash light and when I put it together my airbag light hasn't worked I've check the bulbs and connection. It's setting a chime off ALL the time stops for about a minute then chimes again any ideas ?
I have also same problem bro since 5 years no mechanics can solve although they use scanner also
Thanks for the information. I was able to check the fuse myself, amazingly, but the fuse looks great, not burnt out.
Need a little help I bought a project truck a few weeks ago an there was no fuse for the bag so the light is on and I don't know where to start with that
@@Problimatic and if it's been in a accident it'll blow
this is how we know he saw a chrisfix video
I sure hope this is the problem! Thx!
FORD - Fix Or Repair Daily :P great vid!
Thank you very much!
First On Race Day
Found On Road Dead
I just took out the Airbag IND fuse because I had a drivers test ill put it back later.
Thanks mate for your halp I done it
Great video
My ab lite has been on for10 or 12 years.
It can also let you know that u got a bad battery..etc-battery with dead cells ,cause it reads the battery as low because it had dead(s) cells
Thanks for the great video
not so simple when you have lexus with no actual body damage..ughhhh
good job buddy
I love your name!
Thanks Drew, now you know what to do if you have the same problem with your ranger
Now I can save my black tape.
"Ford stands for Fix it again Tony"
What?
Thanks
Excelent ,thank you
Thank you!
You're welcome!
If you have an invisible Enemy Sabotaging as you go then. Then you would need Devine Intervention.
Black tape
Good information! :) Jack
Thanks Jack!
Good information!!!!
Thanks mate!
Moral of the story-- If you wreck your shit, check the fuse.
like your videos go on with more videos
Chris tips Thanks Chris, we'll keep 'em coming!