How to Replace Alternator 2010-2015 Lexus RX350
Вставка
- Опубліковано 3 жов 2023
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/69/a6/alternator
This video shows you how to install a new alternator engineered specifically for your 2010-2015 Lexus RX350. The alternator in your vehicle powers the battery and electrical system while the engine is running. If your alternator is failing, you may wind up with a constantly draining battery.
This process should be similar on the following vehicles:
2010 Lexus RX350
2011 Lexus RX350
2012 Lexus RX350
2013 Lexus RX350
2014 Lexus RX350
2015 Lexus RX350
Tools you will need:
• Pry Bar 1aau.to/oXb/1AXAA00020
• 10mm Socket 1aau.to/obiT/1AXAA00017
• 12mm Socket 1aau.to/obDS/1AXAA00015
• 14mm Socket 1aau.to/obDS/1AXAA00015
• 17mm Socket 1aau.to/obDS/1AXAA00015
• 20mm Socket
• Pliers
• 1/4 Inch Ratchet 1aau.to/obiT/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/obDS/1AXAA00015
• Torque Wrench 1aau.to/oaLS/1AXAA00044
• Gloves 1aau.to/oamt/1AXSS00048
• Safety Glasses 1aau.to/oaem/1AXAA00343
• Drain Pan 1aau.to/oBU/1AXAA00320
• Floor Jack 1aau.to/oabc/1AXAA00068
• Jack Stands 1aau.to/oYe/1AXAA00065
• Pick 1aau.to/oSj/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I just did my 2010. You don't have to remove any of the front end bumper or grill or radiator. I just took out the fan assembly and it came out fine. The alternator bracket that is hidden you can use a mirror and line up the 12mm socket from the top and get that out. Then wiggle the alt out enough to get to the 12mm bolt on the alternator and remove the bracket. Throw that POS out. All it does is hold a wire, complete waste. It is not used on any other Toyota 3.5. Don't take the belt off either unless you are replacing it. Just slide it off the alternator pulley and leave the rest on. Make sure you have a long ratchet to get that bottom bolt out to clear the pulleys and give you a grip on it to break it free. A long breaker bar may work also. You just need the length.
Local mechanic told me the book says it takes 7 hours to do this job. He wanted $750.00 just for labor. I ended up doing it myself in 2 hours. Thank you for the video.
Holy Crap, why does Toyota make that so frickin hard?
Great video,Thanks
I tried 2010 rx350.
It doesn't need to remove bumper. You can remove grill instead that gonna be easier.
Anyway, this is great video that I was really helpful for job. Thanks😊😊
what size is the "little bolt" ? m8 ?
Why wasnt this vid posted a month ago 😭 i was struggling to change the alternator on this car
16:53
After remove bracket bolt from alternator, you should detached wire harness (that connects crank shaft position sensor) from the bracket. I removed without this job and wire harness was disconnected so I had to replace wire and plus compressor job. This video is not suitable for beginners and you should be careful.
Your going to lead ppl down a dark path….
You do not have to remove the bumper to do this. I’ve done this twice.
+@BigDipper79 We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ
Replacing an alternator on this car is harder than replacing the starter 😔🤦♂️