I’ve been trying to get my brush back together for more than a hour until I saw your video. Afterwards it took me less than a minute. This was a life saver. Thanks for the simple video. It was a big help for me.
This needs more views!! Thank you so much for all of your help. I disassembled mine for the first time and completely forgot how to reassemble it. Your guide saved me frustration and helped me tune it a bit. Thank you!
I truly appreciate your video. I have a question I have a air sprayer but, the piece that goes into the lever to pull back to spray is slightly connected at the bottom to another piece on the end. Should I take it off the end of that piece and put it where it belongs. Meaning, the piece is on there's really no reason why it's on there. And, if I leave it on there I have nowhere else to put it. IDK why it's on the end of another piece. So, I'm wondering if you could give me your professional opinion. Do you think that it was placed on the end of another piece by accident or accidentally got shoved through the end piece of another peace through transit . Please give me your professional opinion if you could please and thank you, Terri Miller
I spent an hour trying to assemble my GHAD39. Every other video had the reverse order on the trigger, auxiliary lever and needle guide. Once I saw your video I got it on the second try. Thank you so much ch.
bigfil1981 yes! Me too! Thank god for this tutorial. I was overzealous and took my whole airbrush apart without KNOWING how to put it back together. And that little part-the lever guide is a b****.
that's exactly what I came for haha, the guy who assembled my airbrush brand in the video didn't explain this part very well!! I'm just concerned that this will be the same despite the brand difference.
Just brought my first air brush. No instruction in the box. Good video, the best I have seen so far. It could do with an audio commentary, but still good. Thank you for your time to do this. It makes so much more sense now .
That little thingy in front of the trigger is the one that got me and from the comments it seems to have gotten A LOT of others as well! Thank you so kindly for pointing everything out
compliment sandwich here: This video helped me re-assemble an airbrush I was about to trash because it was in pieces. BUT instead of wasting time with the croissant joke I just wished you explained what orientation the tube on the trigger needs to be at. At 3:12 you just edit to a point where the trigger is in place. I don't know if you realize this but that tube on the trigger swings freely and if you are so new that you need a video to tell you what each part actually is (like this one) then it needs to tell you which way the tube goes, and that it needs to stay straight up and down and go into the bottom section. There is no caption about it either - just about the grooves. This video helped me a lot, but I hope you consider details like that in future tutorials.
Thank you so much!!!! My airbrush has been out of commission for months because I wasn't quite sure why it wasn't spraying. Your video helped me finally fix it!
Thank you so much for making this video tutorial, tried putting it back together for 3 hours without any luck, but I did it in less than a minute after watching you. A huge thank you.
THANK YOU! The button came out of my airbrush last time I cleaned it and I COULD NOT get it to go back in. Your video just saved my sanity! I've saved the video for later so I can really practice assembling and disassembling my airbrush
I just had acquired a new airbrush from my friend who found it in a dumpster and all of the stuff was in the original box inside of a bag and he gave it to me because he didn’t know what it was used for so I was dirty from the paint and I needed to know how to properly clean it out and saw this video and it was very helpful thank you and I could tell that this airbrush was only used once and thrown away so technically it was still brand new some people are nuts on how they buy stuff especially expensive stuff use it once and throw it away
I really liked the video. The problem I had with the video is that it did not show how to properly place the trigger. The piece at the bottom of the trigger, which way does it face? Toward the front or toward the back or straight down? I am still not getting air through to the front...? Help please?
+GYRUSS thanks Mate! And thanks for watching. Hey i ve seen the website of your wath company and a bit of its history... amazing! A german Pilot watch! Made exactly with the same methods used back then... i just have to have one:) loved it!
absolutely saved my bacon today, taken apart and put together airbrushes before, but never with the auxiliary lever like this could not figure it out for the life of me, thanks a lot for this video!
So im trying to find any info on if there is a way to adjust the dual action mainly on a pistol grip airbrush but i can't find anything anywhere. I need to know if there's a way to delay the action for when the needle starts getting pulled back to allow paint to start flowing... Thus the second action of the airbrush.
I don't need this video because I have stripped my a/b countless times but for a newbie this will be VERY useful. Does this mean you will be painting with it soon?
AlexModeling AlexModeling thankyou i bought my airbrush today and am not very good with it and whan i took it apart to clean it the auxiliary lever fell out and i thought i had broken it but your video helped me you earnd a like and a subscribe👌👌
I've had a table top for several weeks now and have been scared to us it bc I didn't know how to assemble it since obviously you have to clean it for every color but just understanding the parts gave me lots of ease and the step by step help immensely. Thank you. Last night I assembled it before this video and it worked just that it would leak from around the bigger needle cap now that I've seen this video I'm going to try the machine out and see if it's still happening...(be right back) anddd nothing I held the nozzle with my finger and put water and it made bubbles, I blew in the machine, I feel the air coming out but the color isn't coming out... beginners dilemma...lol Does anyone have any pointers? Would appreciate it immensely thank you in advance.
+SlovakianLynx well... that makes sense.. i ve assembled a Mauser, a G3, an MP5, an AK47, UZI, glock, Sig Sauer, Walther P90 and PPK, ... and when i saw this video i rememberes the same too:)
I have this same AB but the trigger flanges it attached to the guide I thought it looks odd you tip it upwards to take the whole thing out never seen this before lol only thing is cant use it the pin in the trigger isn't long enough to his the valve in the airline lol cheap crap but have 2 for big long priming jobs the others fine but one is totally off
Ok now I feel really stupid after watching the video got together with only one piece left watch to two more times then realized where that piece was supposed to go LOL no offense but I'm not blonde either
You just saved me a lot of stress. Been trying to put the lever guide like forever.
I’ve been trying to get my brush back together for more than a hour until I saw your video. Afterwards it took me less than a minute. This was a life saver. Thanks for the simple video. It was a big help for me.
Thank you!
same category here with you mate! until i saw this video!
This needs more views!! Thank you so much for all of your help. I disassembled mine for the first time and completely forgot how to reassemble it. Your guide saved me frustration and helped me tune it a bit. Thank you!
🙂🙂👍👍👍
I did the same! I was like "I'll remember how to put this together" Then instantly forgot haha
I truly appreciate your video. I have a question I have a air sprayer but, the piece that goes into the lever to pull back to spray is slightly connected at the bottom to another piece on the end. Should I take it off the end of that piece and put it where it belongs. Meaning, the piece is on there's really no reason why it's on there. And, if I leave it on there I have nowhere else to put it. IDK why it's on the end of another piece. So, I'm wondering if you could give me your professional opinion. Do you think that it was placed on the end of another piece by accident or accidentally got shoved through the end piece of another peace through transit . Please give me your professional opinion if you could please and thank you,
Terri Miller
I spent an hour trying to assemble my GHAD39. Every other video had the reverse order on the trigger, auxiliary lever and needle guide. Once I saw your video I got it on the second try. Thank you so much ch.
Life saver. I couldn't get that little bit in next to the trigger.
bigfil1981 yes! Me too! Thank god for this tutorial. I was overzealous and took my whole airbrush apart without KNOWING how to put it back together. And that little part-the lever guide is a b****.
bigfil1981 , same here 😂, I had no idea
that's exactly what I came for haha, the guy who assembled my airbrush brand in the video didn't explain this part very well!! I'm just concerned that this will be the same despite the brand difference.
Thanks bro I owe you a beer! I also belong to the f@#& the lever guide group lol. Thought my airbrushing journey ended before it even started.
Upgraded to an Iwata Neo. Relatively cheap and so much better in every way!
Just brought my first air brush. No instruction in the box. Good video, the best I have seen so far. It could do with an audio commentary, but still good. Thank you for your time to do this. It makes so much more sense now .
That little thingy in front of the trigger is the one that got me and from the comments it seems to have gotten A LOT of others as well! Thank you so kindly for pointing everything out
compliment sandwich here: This video helped me re-assemble an airbrush I was about to trash because it was in pieces. BUT instead of wasting time with the croissant joke I just wished you explained what orientation the tube on the trigger needs to be at. At 3:12 you just edit to a point where the trigger is in place. I don't know if you realize this but that tube on the trigger swings freely and if you are so new that you need a video to tell you what each part actually is (like this one) then it needs to tell you which way the tube goes, and that it needs to stay straight up and down and go into the bottom section. There is no caption about it either - just about the grooves. This video helped me a lot, but I hope you consider details like that in future tutorials.
Thank you so much!!!! My airbrush has been out of commission for months because I wasn't quite sure why it wasn't spraying. Your video helped me finally fix it!
That guide got me out of trouble I was going mad trying to put my airbrush together after taking it apart for the 1st time ... thank you👍
Thank you so much for making this video tutorial, tried putting it back together for 3 hours without any luck, but I did it in less than a minute after watching you. A huge thank you.
A video that still keeps giving. Thanks, just wht I needed :)
Thanks so much for this video. I got my gun back together again. I really appreciate it!
Thank you - followed your instructions and by the end of the video had re-assembled the air brush.
Genius! You’ve made this so simple. Best UA-cam tutorial yet😁😁😁😁
Thank you SO MUCH
Your straightforwardness was just what i needed to figure out what i did wrong putting mine back together
THANK YOU! The button came out of my airbrush last time I cleaned it and I COULD NOT get it to go back in. Your video just saved my sanity! I've saved the video for later so I can really practice assembling and disassembling my airbrush
Glad it could help! :D
Thank you! This video was very helpful! Looking at all those pieces was overwhelming but you have simplified everything!
Good! Thank you!
I just had acquired a new airbrush from my friend who found it in a dumpster and all of the stuff was in the original box inside of a bag and he gave it to me because he didn’t know what it was used for so I was dirty from the paint and I needed to know how to properly clean it out and saw this video and it was very helpful thank you and I could tell that this airbrush was only used once and thrown away so technically it was still brand new some people are nuts on how they buy stuff especially expensive stuff use it once and throw it away
Sorry for the typo “It was dirty from the paint”
lifesaver, was almost gonna panic buy a new airbrush after I took mine apart to clean it lmao
🙂👍👍👍👍
Thanks , it's that tab next to the trigger that had me stumped,you saved the day
Thank you so much! Absolutely informative and useful.
great video with a clear and simple explanation... wish I had seen this before I started dismantling my first airbrush last year...
I really liked the video. The problem I had with the video is that it did not show how to properly place the trigger. The piece at the bottom of the trigger, which way does it face? Toward the front or toward the back or straight down? I am still not getting air through to the front...?
Help please?
Thank you, this video helped me out fixing the trigger. Thank you
You saved my life (or at least £80 I was about to pay for a new airbrush) thankyou!
My Timbertech's parts are a little different from this, but it was close enough to help me figure it out! Thanks.
Thank you I was struggling with the auxiliary lever and no othee video showed it as a different piece. Thank you
Thanks for helping me fix my air brush. Silly little things that go wrong.
That happends. Im glad it helped. Stay safe
Thanks. I could clean and assemble the airbrush. was almost on point to buy new. Thank you very much.
Never give up
A definitive airbrush video. Excellent!
+GYRUSS thanks Mate! And thanks for watching. Hey i ve seen the website of your wath company and a bit of its history... amazing! A german Pilot watch! Made exactly with the same methods used back then... i just have to have one:) loved it!
It is an amazing watch although if I were to buy a new one I would go for the model with the pocket watch mechanism rather than self winding movement.
+GYRUSS ok mate... il have that in consideration... pure craftsmanship your wach...
Dude you just saved my brain! I was messing around with my new airbrush and it wouldn't paint - turns out the auxiliary lever was in wrong!
Thank you very much. that was pretty much exactly what i needed :)
Awsome video many thanks for sharing it !!!! Very useful !!! :)
You just helped save my air gun...lol. Thank you.
Oh you're a life saver, the trigger and little part beside it fell out... I had the trigger backwards too haha. Thank goodness for this video... phew!
😊😊👍👍👍👍
@@AlexModeling thanks your video helped me.Thanks again
nice one thanks for the tutorial..i was able to fix my airbrush trigger
You're a life saver! Thank you for this video!
My pleasure! Stay safe
Saved me after I took the AB apart and had pieces all over the place.
thanks alex! got it working !
My pleasure! Stay safe
Thank you ❤️
Thank you so much, this video was perfect now saved
Super useful. Thanks 🙏🏼
You saved me. Thank you soooo much!!!!
Thanks so much for this! The auxiliary lever is a pain to get in
I laughed so hard because of the croissant joke LOL
For the Trigger... which direction did the foldable pin point when putting it back in??.
Thank you it was very helpful
Me too that little loose lever had me stumped till I watched the video....saved me a lockdown without an airbrush 🥺
Thanks mate, like everyone else here, I got myself in a spot of bother and your video got me out. Cheers
Really useful Alex. Lots of guys will find that helpful
hope so mate. i hesitate uploading this one. .. after all we all do this eye folded... thanks
Very helpful
Where can I get a lever guide from I have lost mine 😢 The little piece that you fitted with tweezers that fits behind the main operating lever?
Awesome , l was having issues with the trigger, thanks for uploading!
absolutely saved my bacon today,
taken apart and put together airbrushes before, but never with the auxiliary lever like this
could not figure it out for the life of me, thanks a lot for this video!
Hi, I am still having trouble-which way does the bottom lever on the trigger go? toward the front, toward the back or straight down?? Thank you....
Thank you thank you thank you life saver
My pleasure! Stay safe
Awesome vid man, very helpful, thanks
Thank you ... the video helped me a lot
+Waleed Al Shehhi 😊
Thanks 👍
Cool vid Alex! Many people will find that useful.
+TacticalJackalope its just a 101 Andy but i thought "why not"? Hey... im building a GATO sub! Remember??:)
Perfect video. Thank you
Bless your soul! THANK YOU!
So im trying to find any info on if there is a way to adjust the dual action mainly on a pistol grip airbrush but i can't find anything anywhere. I need to know if there's a way to delay the action for when the needle starts getting pulled back to allow paint to start flowing... Thus the second action of the airbrush.
Oh by the way forgot to mention thank you
Thank you Alex👍
thank YOU for watching Cap!
THANK YOU!!!!!!!
Your welcome!🙂
Thanks for being funny. Great video. 😊😁
I don't need this video because I have stripped my a/b countless times but for a newbie this will be VERY useful. Does this mean you will be painting with it soon?
+UKscalemodeller im just waiting for a new compressor Ian.
AlexModeling Excellent news.
AlexModeling AlexModeling thankyou i bought my airbrush today and am not very good with it and whan i took it apart to clean it the auxiliary lever fell out and i thought i had broken it but your video helped me you earnd a like and a subscribe👌👌
+the skateboarding channal honored! :)
I've had a table top for several weeks now and have been scared to us it bc I didn't know how to assemble it since obviously you have to clean it for every color but just understanding the parts gave me lots of ease and the step by step help immensely. Thank you. Last night I assembled it before this video and it worked just that it would leak from around the bigger needle cap now that I've seen this video I'm going to try the machine out and see if it's still happening...(be right back) anddd nothing I held the nozzle with my finger and put water and it made bubbles, I blew in the machine, I feel the air coming out but the color isn't coming out... beginners dilemma...lol Does anyone have any pointers? Would appreciate it immensely thank you in advance.
Make sure tge nozzle and every single piece is tighen up and no gaps
Dziękuję przed tym filmikiem jebałem się z tym przez półtorej godziny
thank you!
999slawter thank you! :)
Cripes. I toyed with my new airbrush for just 30 seconds and it’s already jammed!
It reminds me of a rifle bolt assembly :D
+SlovakianLynx well... that makes sense.. i ve assembled a Mauser, a G3, an MP5, an AK47, UZI, glock, Sig Sauer, Walther P90 and PPK, ... and when i saw this video i rememberes the same too:)
song?
I have this same AB but the trigger flanges it attached to the guide I thought it looks odd you tip it upwards to take the whole thing out never seen this before lol only thing is cant use it the pin in the trigger isn't long enough to his the valve in the airline lol cheap crap but have 2 for big long priming jobs the others fine but one is totally off
Super
👍👍
Main products made it Hoon Apne Toh Woh Bahar nahi aata hai uska Bahar nahi aane ka kya Karan hai
Why does this intro seems like intro from Step by step ? 🤣
Music is sooooo annoying
Ok now I feel really stupid after watching the video got together with only one piece left watch to two more times then realized where that piece was supposed to go LOL no offense but I'm not blonde either
Easy? I’ll get back to you.
Kisi ko chahiye ho to bata dena
Thank youuuuuuu!