Mercedes Benz Timing Chain Removal & Install Part 1 - How To DIY
Вставка
- Опубліковано 22 сер 2024
- In Part 1 of this video I show the step by step process on how to remove the timing chain on this Merc and delink the chain.
Make sure to check out my first 2 videos on this job for the symptoms and reason of failure & replacement - • Mercedes Timing Chain ...
This is the 3rd video of a series on this failure and step by step repair.
I will be showing how to install a new timing chain, timing chain tensioner and camshaft adjusters both intake and exhaust in the upcoming videos.
If I helped ya out? or just enjoy the content & you would like to buy me a drink ko-fi.com/gera...
Links For Special Tools Required 👇 👇 👇 👇
Camshaft Alignment & Adjuster Removal Tools ebay.us/NFVlxy
Timing Chain Fitting & Splitting Tool Kit For Mercedes Benz inc Temp chain links for install --- ebay.us/UUwLFF
(This is a better and more complete set than mine, it has assorted temp links which makes the job a lot easier)
Tool options that I recommend and use - www.amazon.co....
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020
w204 w203
Camshaft phaser
c class c180 coupe
Fault code P0340-62 Intake Camshaft electrical fault signal comparison fault stored on a Mercedes Benz C Class with a M271 Engine.
#HowTo #Mercedes #TimingChain
Finally. Thank you so much for these videos sir, you are really helping a lot of people including myself. God bless you.
Glad to hear that, thanks for the comment
Well done!
I've done this sort of repair with different types of chains - motorbikes, chainsaws etc, before they came up with removable links.
Thanks for the video. 😉
A man of many talents 😉
Thanks for watching mate 🙏🙏👌
Great video got to appreciate the footage put in of actually using the chain tools close up. Great location on the W204 1.8. In England nearly every W204 has the OM651 diesel with limited access to the chain.
Thanks James, I appreciate it 👍
Great vid !! How did you get the engine timed so that you could fit the lock tools? I would think you can’t just turn engine over by hand? Sorry I’m a noob . Also could you please tell me what is the name of the clamps you use to hold chain in place and where did you get them please ?
Can u do a video on the balancer timming or set a attachment for the alignment marks
Great video though. Well done.
Need to know how to remove the cover i front. I only get the drivers bolt on the bottom behind the cover. Cant see how you remove the passenger bolt..
How long does it take time to do this job when you have the tools and knowledge? I have done this to a V6 320CDI and i think for me, beginner, first try, 4 hours. Didn't find then any decent videos. This video is SUPER!
Do you have any videos of stripping a W204 engine with broken timming chain and show what damage it causes?
Do you need to take the engine out & should I go to a good independent Mercedes mechanic .
Hi just watched your video I was looking for part 2 of installing the new chain. Thanks
It will be my next upload all going well Stephen 👍👌
Turn on notifications and you will see it soon 🙌💪
@@GerardBurkeBurkesGarage when will that be
How did u remove the chain from the top can’t figure it out
Hey Gerard! We've nailed down a solution for the issue with the locking mechanism in M271 EVO engines by designing completely new VVT gears. Interested in trying them out?
Thanks!
Thank you so much for the kind gesture, it is very much appreciated Kevin :)
Wonderful video. I am actually looking at a 2014 E350. Being a VW/Audi guy, I'm used to belts! Are there many problems with these chains? Thanks for any answers. Cheers! EDIT....I got to the point of the chain removal. Used to wrench bicycles. LOL. I have that tool! 😂
Great video. Have you seen the diagnostic video that ends up with the crankshaft pull being the culprit ? The timing marks had moved 40 degrees. Seems an ongoing problem that needs checking when ever you play with one of these engines.
Do you have a video of you doing a 2007 C200 W204 timming chain?
Great vid Burke!!! Million thanks,
👍👌🙏
Amazing video ! Thans from Brazil.
This is part 3 yet it says part 2 not very clear which video comes first or what order other than watching them...
Hi from greece .
Owner of w203 1.8 184hp .
I want to buy a timing chain kit and gears together. I see a lot of oem kits at aloexpress or ebay at 200-250$ . Do you have experience about these kits? I think they are chinese. Is this too bad for purchase??
Hello Gerard, really enjoying this video.
Isnt it neccesary to replace the lower chain as well, that drives the balance shaft? or dont they have an issue?
BGS sells the TC5690VFK kit for this M271EVO engine but that is a roller chain kit i.s.o. a plated tooth chain and sprockets. Will it still fit?
Thanks in advance! Hans
Use a 13mm ratchet spanner for removing pins, makes life easier.
Great work ❤❤❤❤❤❤❤
Thanks
🙏🙏 Thank you very much 🙌🙌
hi nice video . I am changing a chain and venos / cam sprockets as chain jumped off does the crank sprocket wear ?
Gerard what is the best timing chain brand for a mercedes CLS 320 CDI OM642 engine 2008?
Another great video Gerard✨
🙏👌❤️❤️
I want to but a beautiful 88 300 SEL. It has 95k and owner will sell for $4,000.
If I have to do the timing chain, it may not be so bad because it’s a low price. What do you think car runs incredibly well is it in desperate need of a new timing chain just because of his age and the fact that it has 95,000 miles.
Thanks. This helped me.
Hi man, nice video, i just want to ask when its needed to change the timing chain??? I have a Mercedes Benz C180 Kompressor 2005, it has 186000 km, i got it with 140000, lately i have heard that they suffer from the timing chain and i dont want to loose my engine because of this. When i brake and the RPM of the engine start to decrease i hear a small whine from the engine, and dont know what that is, Maybe the chain?? Thanks
Please advise. I’m a nervous wreck about buying but I’m smitten.
Hi What would be the cost for 2019 114 cdi vito ?
Can you change the balance chain lower down the same method?
Good Job! We did same on OM642 engine!
Very good Video
Thanks 🙏
Hi I was wondering are you based in kilmaine co mayo ? I think I’v seen a banner for Burke’s garage. Local to me
great sharing video
My crankshaft will not move more than 180 degrees and one valve I checked will not come back up after rotating engine.
Anyone know the year make and model. Possibly engine size 2.0l, 3.0l, 1.0l? Any info, or are we just going with generic Mercedes.
Good job 👍🍻
Good job Gerard:):)
Thanks Pat 🙏🙏💪
How the heck do i find part 2 of your video
How many hours on a job like this?
You just cannot beat the old pushrod engine, non of this shit to worry about.
Yeah but no vvt on them
So will this be Burke driving a Merc,only joking man.
Hope you and yours had a Merry Christmas and have a HNY. 😉
You too mate 😛
If the right one comes along I will 🤔😁
@@GerardBurkeBurkesGarage Glad you have a sense on humor mate. 😉🤣👍🏾
Thank you for the video May you show the location and how to replace Mercdes Bens M271 Camshaft carrier oil drain pipe A2710181030
I have a 2012 cls 550 how much should a mechanic charge me to fix
Special tools ,special tools ,This should not be done without special tools.
Where’d the second part to this lol
In the description and I have made a playlist on my channel.
Thanks for watching 👍
Ah great vid but bmw have to be one of the worse car I have ever come across anything after the 90s is just poo but keep up the good work
Thanks very much for the kind words 🙏🙏
If your throwing away the chain and not reusing it why not just get a grinder and cut it ?
That's how I have always done it. 🤷♂️ and I have been working on these cars for 20 years. I take a dremel tool and ground the pins flush. Then just use a screwdriver and pop off the links. Then I attach the new chain and run it through. Then I use the specialty tool to re-link it. Many techs at MB do it the same way.
I think it’s just to avoid dropping metal into the engine for noobs like me lol
HI SIR MAY HAVE TIMING TOOL KET NAME OR NUMBER PLS
Sorry mate, you're using the tool wrong!!
Recommend reading the comments and I have also addressed the question in my follow up video 👌👍
Thanks for watching 🙏🙌
Your doing it wrong. Remove the 13mm then install with the 19mm all the way tight to the chain and this holds it in place. Then install the 13mm and drive out the pin
While I completely agree that is the way to do this job in most cases, it was not the most suitable or comfortable for me on this job.
1) when it secured in position like that the view of the pin is erased, there is no view to be 100% that you are pushing the pin exactly where you want it.
2) the tool I have has a bigger push pin than the pin that is being pushed through, so once I got to the stage of being flush I could visibly see it and stop winding the 13mm in with excessive pressure, which may cause damage to the link if not aligned.
3) I recommend using which ever way is safer/easier for you to do the job, it is not always a one way fits all.
Maybe there is a better tool out there that has a small pin and would push the pin right through, I would have used your method if mine was that way.
Doing it this way did turn out to be 100% successful with no issues, as long as the job gets done successfully both tech and customer will be happy 💪👌
Thank you for posting your info always good to hear feedback, it's great for viewers and knowledge sharing🙏🙏👌👍💪
squeaky bum Time come torque them cam bolts over 100nm
:) there was a little bead of sweat alright!!
Thanks
Thank you very much Kevin, very generous of you.
@@GerardBurkeBurkesGarage
All good, your videos have a lot of detail which helped me/gave me confidence to replace the timing chain myself. Saved a substantial amount of money. Not sure what it's like overseas, but in Australia Mercs seem to attract inflated prices. And the little 1.8L in the engine bay reasonably easy to work on.