*Great lightweight screwdriver **MyBest.Tools** and the light definitely came in handy when securing our ceiling diffuser. Battery was still charged for over a month.*
Why do people insist on testing screwdrivers not intended for use with wood screws by putting wood screws in? If you are using wood screws, then use an impact driver. This is aimed at far more delicate work. If I am building panels or distribution boards, then this is the go to tool. If I'm screwing them to the wall, I use an impact driver. Use the right tool for the job people 😊
Which would be better if i need to screw back loose hinges of my kitchen cabinet. Its mdf material i believe. Still impact or this screwdriver is enough?
He talks about it in the video; this screwdriver is to drive screws where you'd do it by hand, and i've seen a lot of people driving screws into wood with a screwdriver so this little thing can do that too. Anyway, i agree with you, this screwdriver is not for driving screws into wood, there are better tools for that.
My only gripe is that I wish it was USB-C. I found another model of screwdriver on Amazon that was, but it was cheaper and I suspect lower quality. This screwdriver I saw being used by a PC builder. The torque setting works especially well for that. The box is pretty large for capacity, a little on the bulky side. I wish they didn't include it cuz I know I won't throw it out and I'll just take up more space with it.
There's nothing more annoying than having to hand-screw something together ua-cam.com/users/postUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
Would you know if this can substitute as torque wrench for bike use? I read in the product description that it has torque settings. Does it automatically stop after applying the indicated torque? Thank you!
Ahahaha...keep using this tool to perform heavy-duty tasks like driving screws into hardwood, and few months later the micro motor within it has to be replaced (because of damaged/expired carbon brushes). If you want to drive screws into hardwood then use appropiate power tool (brushless GSB/GSR series)
English: They gave me all the material but EXCEPT the charger, only the USB cable, what if it doesn't show what type of charger (with the voltage type) this material has to be charged? The question is: Will it be used with a cell phone charger?...... I would appreciate a quick response. Español: Me dieron todo el material pero MENOS el cargador, solo el cable USB, lo que si no muestra con que tipo de cargador (con el tipo voltaje) se tiene que cargar este material?. La pregunta es: Se utilizara con un cargador de celular?...... Le agradeceria su pronta respuesta.
A USB is always understood to be 5V, so your screwdriver should be fine with your phone's charger power brick and the included USB cable that came with screwdriver.
Apparently rubber cutting mats make great chew toys. I knew someone who always chewed their pen lid. You should get some help those materials might be unhealthy.
That thing is good for screwing into wood at full force. Since it doesn’t have variable speed it will end up stripping screws every time you try to do delicate work. My 12v driver, impact driver and hammer/drill make much better delicate work than this.
I don't get the need for gloves while doing this video... In any case, I returned it for being GARBAGE! Get yourself the DeWalt and you won't look back! Advantages over the Bosch: removable battery (you can have spares), circular light around the bit-holder, battery indicator, *v (much, much more power), intuitive operation (amazing!!!), folds, so that it can be used in narrow places. 430 rot/min max... Goodby!
*Great lightweight screwdriver **MyBest.Tools** and the light definitely came in handy when securing our ceiling diffuser. Battery was still charged for over a month.*
Why do people insist on testing screwdrivers not intended for use with wood screws by putting wood screws in? If you are using wood screws, then use an impact driver. This is aimed at far more delicate work. If I am building panels or distribution boards, then this is the go to tool. If I'm screwing them to the wall, I use an impact driver. Use the right tool for the job people 😊
Which would be better if i need to screw back loose hinges of my kitchen cabinet. Its mdf material i believe. Still impact or this screwdriver is enough?
He talks about it in the video; this screwdriver is to drive screws where you'd do it by hand, and i've seen a lot of people driving screws into wood with a screwdriver so this little thing can do that too. Anyway, i agree with you, this screwdriver is not for driving screws into wood, there are better tools for that.
You didn't watch the whole video, did you? He mentioned that it's better to use an impact driver for hard surfaces.
My only gripe is that I wish it was USB-C. I found another model of screwdriver on Amazon that was, but it was cheaper and I suspect lower quality. This screwdriver I saw being used by a PC builder. The torque setting works especially well for that. The box is pretty large for capacity, a little on the bulky side. I wish they didn't include it cuz I know I won't throw it out and I'll just take up more space with it.
Dat wash ey greyt rebyuweng weng..Ay like da Bosch iskrewdrayber...ets da besh! Tenk u por da rebyu! Namber one!
There's nothing more annoying than having to hand-screw something together ua-cam.com/users/postUgkx1McjgiqTNcTjrhvRvJWcrk5bzTeQW-Wn except for the pain in your wrist that is. This addition to my tool kit is great and I can get a lot done without all the pain and annoyance. The battery last's a long time and I have yet to run out of power when doing a small project (granted I am saying small project because I'm no construction worker). The only thing that I wish it had was an LED or pair of LEDs to indicate when it was charging and whether or not the charge was complete (or full).
This is the EXACT same thing as the dremel screwdriver......its weird how much they have in common
Would you know if this can substitute as torque wrench for bike use? I read in the product description that it has torque settings.
Does it automatically stop after applying the indicated torque? Thank you!
It's just a clutch on the drive, it will not be suitable for much but driving screws, and is not an accurate torque drive.
nice review. keep up the go work. 👍👊🏼
Ahahaha...keep using this tool to perform heavy-duty tasks like driving screws into hardwood, and few months later the micro motor within it has to be replaced (because of damaged/expired carbon brushes). If you want to drive screws into hardwood then use appropiate power tool (brushless GSB/GSR series)
The music makes it hard to understand what you are saying.
English:
They gave me all the material but EXCEPT the charger, only the USB cable, what if it doesn't show what type of charger (with the voltage type) this material has to be charged?
The question is: Will it be used with a cell phone charger?......
I would appreciate a quick response.
Español:
Me dieron todo el material pero MENOS el cargador, solo el cable USB, lo que si no muestra con que tipo de cargador (con el tipo voltaje) se tiene que cargar este material?.
La pregunta es: Se utilizara con un cargador de celular?......
Le agradeceria su pronta respuesta.
A USB is always understood to be 5V, so your screwdriver should be fine with your phone's charger power brick and the included USB cable that came with screwdriver.
Nice gloves
Apparently rubber cutting mats make great chew toys. I knew someone who always chewed their pen lid. You should get some help those materials might be unhealthy.
Hi may i ask, if the drivers are magnetic? Im doing desktops, need the drivers to catch my screws.
Yes they are. Very useful
you're going to chowder them out like any other bit, so buy whatever you need as a replacement if you need magnetic.
Bakit naman boss di ka na nagu-upload? sayang mahusay ka naman mag review :)
Where do you get those gloves?
Hi purchase link of bits
can i use it on motorcycle ?
What other bits can be used for this unit?
anything hex
I used mine to remove lug nuts on my chevy
Does it use 1/4' bits
where dis you buy it?
This should be available in bosch concept stores in your area. You can also check online stores
Parang ok nga to...
Not usb C... Sigh...
¿Para que los guantes?
Porque los tiene quiere y puede
That thing is good for screwing into wood at full force. Since it doesn’t have variable speed it will end up stripping screws every time you try to do delicate work. My 12v driver, impact driver and hammer/drill make much better delicate work than this.
Just use the appropiate bit for the screw, and you wont strip any...
And it has an adjustable clutch
2022 Worx wx-242 is better than Posch go-2
I don't get the need for gloves while doing this video... In any case, I returned it for being GARBAGE! Get yourself the DeWalt and you won't look back! Advantages over the Bosch: removable battery (you can have spares), circular light around the bit-holder, battery indicator, *v (much, much more power), intuitive operation (amazing!!!), folds, so that it can be used in narrow places. 430 rot/min max... Goodby!