Trying To Fix Stuff: PlayStation 4 (1215A) With A Broken Power Button
Вставка
- Опубліковано 27 сер 2024
- 1215A Model PlayStation 4 with a (physically) broken power button.
Fast Talkin by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
Epic Unease by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
Excellent video. I was able to get my original model ps4 working again after 3 years! Almost threw it out. It was stuck in safe mode and my power button had broke off. I dusted the inside and added the thermal paste like you showed, and now it runs quietly when it used to sound like a jet engine. Thank you!!
Can you go a bit more into detail about what state your PS4 was in? What was the main problem and what things did you try? Because your issue sounds pretty similar to mine
This is awesome. Thank you for posting....subscribed.
i am now this helped thanks again it worked and if i wanted to make it look good the 2 wires fit rite thru where the button used to be for the new button and new hard drive works loading software now cant wait to try out this ssd
and thanks for posting went to upgrade hard drive to solid state got it apart and dont know how long its been broke but wont be able to put in safe mode to re install software
plug in the controller and hold the ps button. you can put it in safe mode with the controller.
I managed to repair mine today!!!! Bought 10 button from AliExpress since they were so cheap first one didn't survive though.. it wasn't pretty but it works just nice
It took me few hours because my soldering iron tip was bad? The tip doesn't get hot enough to melt the solider... Maybe i need better one
Thank you
Glad you were able to do it! Even though it's SMD it's pretty easy, and pretty hard to mess this one up, so it's very forgiving even if you've never done something like it before :)
@@KylesTinkering what's SMD?
Tou could say im beginner.. i think my biggest issue is the iron and maybe i need to clean my things well
My first video from you. I like your style and enjoy fixing things myself. I have one suggestion though. Sometimes you go a little too fast in explaining some things. I know you are fixed on "youtube" time, but some things do get lost. But all-in-all, GREAT content.
Gona try and replace it 🤙
Thank you :) i just bought one from a facebook sales group with this problem.
well, it wont connect to my harddrive now :P
Fixed the power button :) now its the hdd. cant connect to it.
i have the opposite issue, my eject button doesnt work but the power button works fine, so i’m gonna use this video just for reference :>
Is there no easier way to fix this? It feels like the power button is loose but jammed, I really have to take it apart this much to fix that?
Depends. You can get to the power switch just but taking the top part of the console off (the warranty sticker/screw on the top of the case, and then two T-8 screws under the HDD cover). If it looks broken like this, or you try to click it manually and it doesn't work, then you'll have to solder a new button in. The plastic button part could be broken, which would mean you don't have to solder anything, you can just get a replacement plastic button.
@@KylesTinkering can you help me last two years my power and eject stop working because I open it to clean it
@@KylesTinkering an fix tips or part to get to fix it
@@KILLERBUSHY If it's the physical button, like this video, you'll need to replace it. You can technically take the button apart and clean the contacts, but the button is only as big as a couple pieces of rice...
If it's the PS4 that uses a capacitive touch, you could clean the contacts with a fiberglass brush, and the little metal prong that comes from the case (bottom/top). To give it a better connection to the touch sensor. Just make sure the metal prong is bent properly so that it makes contact with the contacts when you put the shell back together
@@KylesTinkering I did that but it is the button that is the problem and I now power on my ps4 with the controller an it has a problem with the 9.60 update now
bravissimo
It is not SAUDERED, it is SOLDered
Everything was good until "desoldering by scraping" 11:26. WTF was that?
i have like a bolt in the thing that hold the power supply in that is under the black cover
Btw u have earned a sub
Thank you :D On a little bit of a break right now, real life gets in the way of the hobby
I attempted to replace the power button and destroyed the pad. I wonder if I can still fix it. But it may involve running a new ground and new power.
Picking up some solder mask too. I’ll let you know
How I make out. Probably a few weeks
How did it ended?
Bei mir ist es nur dieses Plastikteil was den Knopf betätigt irgendwie fehlerhaft.
👏🏼
thanks bro :)
@ Kyle thinker
Where did you get the power button? Can you post where you purchased it?
www.aliexpress.com/wholesale?trafficChannel=main&d=y&CatId=0&SearchText=ps4+power+eject+button<ype=wholesale&SortType=total_tranpro_desc&groupsort=1&page=1
Only a couple of different sellers. Go with whichever is cheapest :)
what if dont have supply of power buttons can i jus attach two wires and attach to diff kind of button or do all four points need to be connected i figure jus ground an power
You can use any kind of button and run some wires. You don't need all four points, you can see the bottom two pads, closest to the hole, are connected and are ground, one pad doesn't connect to anything, and the last pad goes to a via
Hi name my is Jake , I have a ps4 and the controller won't connect to the system I've tried every cord out there and multiple controllers. The USB port will charge the controllers but will not connect to the system do you know what it may be?
Most likely it's your bluetooth/wifi module, that's soldered to the board. (if you look at 9:15 in the video, it's the silver rectangle in the bottom left corner). Your wifi probably doesn't work either, good way to tell if this is the issue. I've had luck where I got a PS4 in that had some stuff spilled on the system and got into the solder balls under the module, hot water and soap cleaned it and got it working, but that was just lucky that it was an easy fix.
You should still be able to use a wired controller (needs to be 100% wired only). The PS4 will connect through USB first, just to pair it to the system, and even if it's connected through USB, it will switch to a bluetooth connection. So if you use a wired controller, it will still work. Otherwise, the module may need to be replaced.
@@KylesTinkering I'm gonna try it out and see what happens and I belive something may have been spilled on this one as well so it might be the same problem ill update you and let you know im pretty good at fixing things that I understand but ps4 is a new project for me thank you for reaching out.
How much you charge for this job???
where do I buy this power botton from please please help me
www.aliexpress.com/wholesale?trafficChannel=main&d=y&CatId=0&SearchText=ps4+power+eject+button<ype=wholesale&SortType=total_tranpro_desc&groupsort=1&page=1
Only a couple of different sellers. Go with whichever is cheapest :)
My power button doesn't click when you press it. It has no resistance, just there. I opened it up and the power button plastic is fine. So I am guessing that little power button you soldered onto the board, mine must have fallen off or something. I can't get my PS4 to turn on at all, even with my controller cause it's not paired anymore lol. Controller just flashes white. I can use the ps4 controller on my pc though at least.
You can pop a disc in it and it'll turn it on. If it doesn't then you've got something else wrong xD
Or connect it to the PS4 using a USB cable and it should power on/sync when you press the PS button again
@@KylesTinkering Good thinking. I had to dissasemble it again and use the screwdriver to manually eject my disc, but it turned it on once i inserted again. youre a legend. subbed
Hi I have the issue I done a format and didn't realise power button was broke I can turn the PS4 on with desk but the controller won't pair with PS4 tried a couple of Leads no joy any help appreciated
Any chance you can do my power button
yaaay, thanks, it just fin broke
no disrespect but you guys make these vids expecting people to have all that stuff you have
No offense to you but what did u think u had to do? Clip on the power button 😂 all these tool u can get them at amazon for 20$ easily.
How long it took u
The video is about half an hour long, there wasn't a lot of off camera stuff, so maybe 20-30 mins. It would be less but it takes time to record and set up the camera shots
Could you possibly fix my power button lol
Sorry, I don't do this as a service. You could try to contact any local game store or phone repair store. Would probably be cheaper than trying to use an online service, because of shipping.
It seems like a tutorial on how to risk destroying a motherboard.
Dude, change products, to desolder use a suitable fine tip, in addition to flux so as not to risk doing damage to the motherboard.
I have seen the whole video and it is undoubtedly bad as a video, because you have brought streaks on the plate by making a good weld, but at the same time ignoring that by doing so you risk a lot.
We need to be more careful, people follow you, if they see you doing this they think it's all simple and easy and repeat your same actions.
For those who follow the channel, it's not wrong, but you have to use certain products.