Very helpful only video I’ve seen that shows how to take center counsel out for 2016 and above. I know it was to take air bag out but appreciate it!!!👍🏻
It is best to send the original airbag control module for reset. Because it's original and already VIN programmed to your vehicle. If you have a replacement part, you need to first check that the part number is the same. If your vehicle was in an accident/collision, you can send original airbag control module to be reset. Its better this way, because it will be plug n play. Also, if your seat belts are bad/stuck/locked you can send them for repair as well. Check out myairbags.com
2017 Malibu. Hit a pole. Driver steering wheel bag and drivers knee bag went off. I have good used bags. Besides removing and replacing the bags, what programming wise do I need to do and is there any other parts I need to replace besides the 2 air bags?
Thanks Eli - Does the side curtain airbag use the same module? Just the drivers-side side curtain airbag deployed. Anything special to note about that (2016 Chevrolet Malibu)? Thanks for your expertise. Chuck in NE Kansas
Hey Chuck, Yes, the side curtain airbag does use the same airbag module. Theres just one airbag computer for the entire vehicle. Chevy refers to the airbag module as a SDM or DERM unit. Check the two front seat belts. Usually both will deploy. We're happy to help if you need any more info. Thanks for commenting! www.myairbags.com/
Great vedio thank u. Does the new module need programming ?can it done using autel mx 808 scan tool ? What is the device u recommended to programming air bag modules
Haitham, On the Malibu, If you are putting in a module that is not original to the car, you will probably need to get it programmed into the car. Theres a few different scanners that can program the module. For Malibu - GM Tech2 usually works the best. If the car was in an accident, we can reset the original module that is in your car. This way, you don't have to do any additional programming when you get it back from us. Thanks for your question!
Yes this vehicle has one airbag control module. Also check the seat belts to make sure they are good. We do reset airbag control modules and rebuild seat belts. See our site for more info www.myairbags.com
Sergio, if the 2011 has a similar interior / center console setup, it will be similar process. If you need reset you can start here: www.myairbags.com/
It could be a bad connection somewhere or one of the components are still bad, such as seat belt, impact sensor, airbag. Check here: blog.myairbags.com/i-received-my-airbag-module-back-and-the-airbag-light-is-still-on-what-do-i-do
Olagoke, The 2016 should have the same interior as this 2018. If you're referring to the older 2015, then yes the interior would be different. The module may be slightly in a difference position but its under the center console, bolted to the floor just like this video. The module will also look the same as the one you see in this video. Let us know what you find....
@@MyAirbags Thanks guys, sure it's the carryover style (2015) body shape. I'll take a look and keep you posted. Also a quick question, can the module be reset if the curtain airbag and the wheel airbag are deployed after replacing them?
Olakoge, Yes we can absolutely reset the airbag computer module (SDM / DERM) unit. Once you have it removed you can just send it. We only need 24 hours or less with the unit before we ship it right back. MyAirbags.com - Heres the link: www.myairbags.com/product-category/repair-return/airbag-module-reset/
Am, I'm sorry to hear! Some models have different options so it does differ. If we come across another one with your type of trim, we'll make another video on the disassembly. Thanks for commenting.
Very helpful only video I’ve seen that shows how to take center counsel out for 2016 and above. I know it was to take air bag out but appreciate it!!!👍🏻
MLTAC_Gaming, I'm very glad it helped you with the center console. This is great feedback for us. Thank you.
Can you reset a module and it work w/ undeployed airbags removed at a puck and pull ie used. Not iriginal?
It is best to send the original airbag control module for reset. Because it's original and already VIN programmed to your vehicle. If you have a replacement part, you need to first check that the part number is the same. If your vehicle was in an accident/collision, you can send original airbag control module to be reset. Its better this way, because it will be plug n play. Also, if your seat belts are bad/stuck/locked you can send them for repair as well. Check out myairbags.com
Just disconnect the negative side. You don't need to disconnect the positive side. Because . . . electricity
2017 Malibu. Hit a pole. Driver steering wheel bag and drivers knee bag went off. I have good used bags. Besides removing and replacing the bags, what programming wise do I need to do and is there any other parts I need to replace besides the 2 air bags?
Check the seat belts to make sure they are working correctly. Check here for more info blog.myairbags.com/how-to-reset-an-air-bag-light-the-right-way
Thanks Eli - Does the side curtain airbag use the same module? Just the drivers-side side curtain airbag deployed. Anything special to note about that (2016 Chevrolet Malibu)? Thanks for your expertise. Chuck in NE Kansas
Hey Chuck, Yes, the side curtain airbag does use the same airbag module. Theres just one airbag computer for the entire vehicle. Chevy refers to the airbag module as a SDM or DERM unit. Check the two front seat belts. Usually both will deploy. We're happy to help if you need any more info. Thanks for commenting!
www.myairbags.com/
Great vedio thank u.
Does the new module need programming ?can it done using autel mx 808 scan tool ? What is the device u recommended to programming air bag modules
Haitham,
On the Malibu, If you are putting in a module that is not original to the car, you will probably need to get it programmed into the car. Theres a few different scanners that can program the module. For Malibu - GM Tech2 usually works the best.
If the car was in an accident, we can reset the original module that is in your car. This way, you don't have to do any additional programming when you get it back from us.
Thanks for your question!
Any idea whether 2007 Malibu Maxx LT also goes off of one computer? Only the driver steering wheel bag deployed.
Yes this vehicle has one airbag control module. Also check the seat belts to make sure they are good. We do reset airbag control modules and rebuild seat belts. See our site for more info www.myairbags.com
Thanks!
Thank you for commenting! www.myairbags.com/
Здравствуйте! Может из-за сработавших подушек не заводится malibu 9 гибрид? И что нужно сделать чтобы разблокировать гибрид
Are you getting any troublecodes?
@@MyAirbags The 1.8 hybrid won't start after an accident. if you reset the crash date, then maybe it will work?
Also does this stop the car from operating?
The car can still start without the module.
Will this work on a 2013 Chevrolet Malibu Eco
2013 model should be similar
Ильюшка, привет !!!
Long time no see
Thank you for your comment
I reset my module and put airbags on. But the light is still on
Check here for help: blog.myairbags.com
Will it work on a 2011?
Sergio, if the 2011 has a similar interior / center console setup, it will be similar process. If you need reset you can start here: www.myairbags.com/
Why is my airbag light still on even after replacing my airbags and resetting the Module
It could be a bad connection somewhere or one of the components are still bad, such as seat belt, impact sensor, airbag. Check here: blog.myairbags.com/i-received-my-airbag-module-back-and-the-airbag-light-is-still-on-what-do-i-do
My girlfriend crashed my malibu now I have to fix it ill send the module over soon as I get it out
Yes send it to us we can take care of it.
Here is the link www.myairbags.com/product-category/repair-return/airbag-module-reset/
Thanks for the info, is the module in the same location on the 2016 chevy Malibu LTZ old style?
Olagoke, The 2016 should have the same interior as this 2018. If you're referring to the older 2015, then yes the interior would be different. The module may be slightly in a difference position but its under the center console, bolted to the floor just like this video. The module will also look the same as the one you see in this video. Let us know what you find....
@@MyAirbags Thanks guys, sure it's the carryover style (2015) body shape. I'll take a look and keep you posted. Also a quick question, can the module be reset if the curtain airbag and the wheel airbag are deployed after replacing them?
Olakoge, Yes we can absolutely reset the airbag computer module (SDM / DERM) unit. Once you have it removed you can just send it. We only need 24 hours or less with the unit before we ship it right back. MyAirbags.com - Heres the link: www.myairbags.com/product-category/repair-return/airbag-module-reset/
مرحبا..... سيارتي ماليبو ٢٠١٧ تعرضت لحادث وتم انفجار AIRBAG داشبول كيف يمكن تغير airbag
Thank you for commenting. For your needs and service: www.myairbags.com
My Malibu has rear ac on the center console didn’t help
Am, I'm sorry to hear! Some models have different options so it does differ. If we come across another one with your type of trim, we'll make another video on the disassembly. Thanks for commenting.
Can I drive the car without the airbag module?
Abel,
myairbags.zendesk.com/hc/en-us/articles/115012408547-Can-I-drive-my-car-truck-while-the-airbag-module-is-removed-
How can I order these parts to Iraq 🇮🇶?
No