I had this issue, went out and had no power, couldn't use key fob to open or anything, but battery was not old. I though it was my 120A battery fuse as well, but it wasn't, I jumped it , ran it, than parked it and noticed my brake lights would not go off, therefore , they drained my battery. Turns out there is a plastic grommet in the brake peddle that broke off and it was not tripping the break light switch to off. I put a wedge in to press against the light switch and it turned off, went and got a 10$ grommet placed it in the hole and problem was fixed.. This is a common issue, easy fix
Please what can make my Honda Accord 1999 model not start once, i have to start it 3 to 4 time before it respond, i have change the complete injector, fuel pump, fuel filter and and also new battery, but the same problem still occur, i need your help on how to solve the problem some time i have to start it from engine starter before it works
I'm working on this car right now, the wiring on that module is burnt just like the one on this video. Is that something I need replaced and how can I do that? Thanks Kelvin. this video helped alot!
@lucasmartinez8047 I replaced the fuse and it worked perfectly, try using an electrical tester on the wire and spot the wire goes in. If it beeps you're good!
HELP please. to the right of the 120 amp fuse, 0:14 minute, is a fuse with wires running through the fuse inserted into a rust brown block. Can someone tell me where I can obtain a replacement? what is the fuse amps? name of part? I have a 2007 Honda. Any help is greatly appreciated.
very bad explanation and presentation, what is the symptoms why change and how to test in another word trouble shoot take the fricking gloves off and point to one location not 2, and get tight your size gloves to exact fit. bad video thumb down
I had this issue, went out and had no power, couldn't use key fob to open or anything, but battery was not old. I though it was my 120A battery fuse as well, but it wasn't, I jumped it , ran it, than parked it and noticed my brake lights would not go off, therefore , they drained my battery. Turns out there is a plastic grommet in the brake peddle that broke off and it was not tripping the break light switch to off. I put a wedge in to press against the light switch and it turned off, went and got a 10$ grommet placed it in the hole and problem was fixed.. This is a common issue, easy fix
Next week’s video : replacing my Walmart battery.
Great video. Thumbs up dude
What is that part, the one you tapped that is right next to the battery fuse?
So what exactly caused a 120amp fuse to blow. Shorting the blown fuse together could have gotten very ugly.
Lucky your car didn't catch on fire by pushing the bad fuse together like that
Please what can make my Honda Accord 1999 model not start once, i have to start it 3 to 4 time before it respond, i have change the complete injector, fuel pump, fuel filter and and also new battery, but the same problem still occur, i need your help on how to solve the problem some time i have to start it from engine starter before it works
it would have been better to listen to what it was doing when trying to start...if it made any sounds
I'm working on this car right now, the wiring on that module is burnt just like the one on this video. Is that something I need replaced and how can I do that? Thanks Kelvin. this video helped alot!
Wondering them same thing.
@lucasmartinez8047 I replaced the fuse and it worked perfectly, try using an electrical tester on the wire and spot the wire goes in. If it beeps you're good!
HELP please. to the right of the 120 amp fuse, 0:14 minute, is a fuse with wires running through the fuse inserted into a rust brown block. Can someone tell me where I can obtain a replacement? what is the fuse amps? name of part? I have a 2007 Honda. Any help is greatly appreciated.
Same question hope he answers
Did you ever get your problem solved?
Can you confirm the issue you were having caused the car to have a No Crank, No Start or Crank, No Start? Mine is currently a Crank, No Start.
Fanatic Veedio must be the starter
very bad explanation and presentation, what is the symptoms why change and how to test in another word trouble shoot
take the fricking gloves off and point to one location not 2, and get tight your size gloves to exact fit. bad video thumb down
Great video problem fixed these bosos on here can’t change a screw lol