@@JaniVoutilainen i had 30EA code but after clearing fault memory it come back after 1000-3000km. installed NOXEM from bimmerprofs 2weeks ago..no fault code yet.
Seems bad! You can try performing a long burn run and resetting and re-teaching the adaptations. But it may not help anymore ... But probably the cheapest solution is NOXEM unless you want to buy a new NOX Catalytic Converter. Not many used for sale ...
Hi, first thank you for the great video. My nox sensor unfortunately does not start, even after I installed a new one he still does not start. Can that be because not all learning bits of the injectors are learned?
Thanks! You probably coded a new NOX sensor for your car? The car must be told that it has been replaced and at the same time the Learn bits must be reset. It may take some time before the Nox sensor starts working, which means it may require driving a little more ...
Hi ! Great videos! Can I contact you in any way regarding this problem? My car shows "17!" on schubabschaltung and the car answer bad on accelerate below 90km/h. The NOx converter is empty but NO fault codes founded inside INPA. Only had CO converter bank 1/2 but not even those anymore
Hi, is it possible to share your software with me?. For weeks I am trying to install INPA. It never worked. Sometimes there was no N43 engine listed in INPA. Would be great if you could help me. BMW E90 2010 N43B20
Hi Jani, need your help on this. I have a e90 318i LCI . I had the 30EA fault code. After taking it to the dealer drove on the highway multiple times on cleaning mode. Then replaced the NOx with a reconditioned one and now I get 30DC Nitrogen oxide sensor, heating. There's also a misfire in the car. What do you think the problem is? Really appreciate if you can advise
Hard to say without research. Did you replace the old sensor with a refurbished NOX sensor? If so, it would appear that the probe of its refurbished NOX sensor is defective. Its heating element may be defective. I hope you find a solution! 👍
Hi Jani, Did you update the ECM software in your car? My sister runs a N43 that has a tendency to throw NOX related DTCs. I'm just wondering if updating the ECM could solve some of the issues. I will troubleshoot using your excellent videos as well of course.
I replaced my (e90 318i) NOx sensor and reset the adaptations, before with the faulty sensor I was getting only one fault code 3104 now with the new one im getting two fault codes 30DC and 30DE. Why? Injector, sparkplugs and coilpack all brand new. Help pls.
This is more related to the N43 and N53 engines. These cars have a NOX system (NOX Catalytic Converter and NOX sensor ...) but the N46 does not The successor to N46 is N43 ...
Thanks keep them n43 videos coming!
thanks for n43 videos please keep it coming! i have same problem with nox!
Thanks!
What fault codes you experience? At the moment I have only 30EA fault code and I try to solve it...
@@JaniVoutilainen i had 30EA code but after clearing fault memory it come back after 1000-3000km. installed NOXEM from bimmerprofs 2weeks ago..no fault code yet.
Thank you for the information!
I think I'll put that NOXEM unit in my order
Hey Jani, awesome good explained. I suppose the values are the same for the N53?
Hey I have the 30E9 code on my N53 engine - do you know what the best solution is?
Seems bad!
You can try performing a long burn run and resetting and re-teaching the adaptations. But it may not help anymore ...
But probably the cheapest solution is NOXEM unless you want to buy a new NOX Catalytic Converter. Not many used for sale ...
Hi, first thank you for the great video. My nox sensor unfortunately does not start, even after I installed a new one he still does not start. Can that be because not all learning bits of the injectors are learned?
Thanks!
You probably coded a new NOX sensor for your car? The car must be told that it has been replaced and at the same time the Learn bits must be reset. It may take some time before the Nox sensor starts working, which means it may require driving a little more ...
My offset sensor is showing 18 and its stuck on that?
Hi ! Great videos! Can I contact you in any way regarding this problem? My car shows "17!" on schubabschaltung and the car answer bad on accelerate below 90km/h. The NOx converter is empty but NO fault codes founded inside INPA. Only had CO converter bank 1/2 but not even those anymore
Inpa link? I have a bad version of inpa and i can’t get into the menu of Desulf
You need to upgrade MSD80 from INPA.
Here you can find it: bimmerprofs.com/msd80-loader-2-023/
Hi,
is it possible to share your software with me?. For weeks I am trying to install INPA. It never worked. Sometimes there was no N43 engine listed in INPA. Would be great if you could help me. BMW E90 2010 N43B20
Hi Jani, need your help on this. I have a e90 318i LCI . I had the 30EA fault code. After taking it to the dealer drove on the highway multiple times on cleaning mode. Then replaced the NOx with a reconditioned one and now I get 30DC Nitrogen oxide sensor, heating. There's also a misfire in the car. What do you think the problem is? Really appreciate if you can advise
Hard to say without research. Did you replace the old sensor with a refurbished NOX sensor? If so, it would appear that the probe of its refurbished NOX sensor is defective. Its heating element may be defective.
I hope you find a solution! 👍
Hi Jani,
Did you update the ECM software in your car?
My sister runs a N43 that has a tendency to throw NOX related DTCs.
I'm just wondering if updating the ECM could solve some of the issues.
I will troubleshoot using your excellent videos as well of course.
In fact, I upgraded my own car DME module, but I do not think it has much effect on the NOX sensor problems.
I hope you find a solution! 👍
I replaced my (e90 318i) NOx sensor and reset the adaptations, before with the faulty sensor I was getting only one fault code 3104 now with the new one im getting two fault codes 30DC and 30DE. Why? Injector, sparkplugs and coilpack all brand new. Help pls.
Did you code new nox sensor to the car? It needs to be done 👍
@@JaniVoutilainen reset the adaptations
Desulf work's for N46 motor?
This is more related to the N43 and N53 engines. These cars have a NOX system (NOX Catalytic Converter and NOX sensor ...) but the N46 does not
The successor to N46 is N43 ...