Огромное спасибо за видео! ❤ В сервисе менеджер сказал, что работа будет стоить минимум 1000₽, всё зависит от сложности разбора, скорее всего дороже ( хотя я сразу назвала модель автомобиля). Конечно, в 3 минуты, как на видео я не уложилась😅. Минут 20 занял разбор ( всё таки занималась этим впервые), минут 10 поход в ближайший автомагазин за лампочкой ( взяла перегоревшую как образец), минут 5 сборка. Ремонт обошёлся в 70₽ и 35 минут личного времени 😂
I managed to remove the red cap from the old bulb. First heated it a little with a hair dryer. Carefully inserted a very thin needle between the bulb and the cap and moved the needle around the bulb to unstick the red cap. Then it came out easily. I will, however, put the new bulb without the cap, I think white light looks nicer (my dashboard lights are white as well)
Very common bulb available any auto parts or online 1.2 w then, if you want to make it red or any other color you so desire my girlfriend likes hot pink, go to any hardware store and get a small roll of translucent tape and tape it to the underside of the shift positions. One thing nice about Suzuki is you can take the whole car apart with a putty knife.
Shame the new bulb didn't come with the red filter as it's obviously not really designed to be transferred from the old one. Perhaps an LED replacement in red would have been beneficial - you could make one yourself using the old bulb, a red LED and a 500 - 600 ohm resistor (1/4 Watt should be okay). Just solder the resistor to the long leg of the LED (that's the anode (positive)) then you can either solder or fold and insert both ends into the bulb holder. Insert the holder and test. If the LED doesn't illuminate then remove and reinsert 180° rotated (so the connections are swapped) or if you have a multimeter then just check which way round the supply is and install accordingly. You can vary the resistor value to adjust the brightness of the LED (higher resistance makes it dimmer) but don't drop it too low or you'll fry the LED!
+Pete Allum I was surprised to see the new bulb did not come with the red cond...m. I did try to transfer but it just fell to pieces. The led is great idea! Will leave as is. Thx for the excellent tip!!!!
Огромное спасибо за видео! ❤ В сервисе менеджер сказал, что работа будет стоить минимум 1000₽, всё зависит от сложности разбора, скорее всего дороже ( хотя я сразу назвала модель автомобиля). Конечно, в 3 минуты, как на видео я не уложилась😅. Минут 20 занял разбор ( всё таки занималась этим впервые), минут 10 поход в ближайший автомагазин за лампочкой ( взяла перегоревшую как образец), минут 5 сборка. Ремонт обошёлся в 70₽ и 35 минут личного времени 😂
Лампочка подойдёт любая W1.2W. Не благодарите. :-)
Guys, use any w1.2w bulb. I bought bosch for $1.5 for a pack of 2
Спасибо тебе добрый человек.
I managed to remove the red cap from the old bulb. First heated it a little with a hair dryer. Carefully inserted a very thin needle between the bulb and the cap and moved the needle around the bulb to unstick the red cap. Then it came out easily. I will, however, put the new bulb without the cap, I think white light looks nicer (my dashboard lights are white as well)
Very common bulb available any auto parts or online 1.2 w then, if you want to make it red or any other color you so desire my girlfriend likes hot pink, go to any hardware store and get a small roll of translucent tape and tape it to the underside of the shift positions. One thing nice about Suzuki is you can take the whole car apart with a putty knife.
Спасибо огромное !
Excelente.... Gracias
Thanks for the video.
Help me to do it faster
Shame the new bulb didn't come with the red filter as it's obviously not really designed to be transferred from the old one. Perhaps an LED replacement in red would have been beneficial - you could make one yourself using the old bulb, a red LED and a 500 - 600 ohm resistor (1/4 Watt should be okay). Just solder the resistor to the long leg of the LED (that's the anode (positive)) then you can either solder or fold and insert both ends into the bulb holder. Insert the holder and test. If the LED doesn't illuminate then remove and reinsert 180° rotated (so the connections are swapped) or if you have a multimeter then just check which way round the supply is and install accordingly. You can vary the resistor value to adjust the brightness of the LED (higher resistance makes it dimmer) but don't drop it too low or you'll fry the LED!
+Pete Allum I was surprised to see the new bulb did not come with the red cond...m. I did try to transfer but it just fell to pieces. The led is great idea! Will leave as is. Thx for the excellent tip!!!!
Get a nail polish from a local cosmetic store, or from the super market and using a small brush paint the bulb with one extra thin layer.
Красненький кожух у меня потихонечку сполз с лампочки. Зато крепления серебристого ободока обломал :)
А я уже по второму кругу меняю лампочки подсветки обогрева сидений.
где купить?
@@berishstudio1013 exist.ru
Декоративную накладку серебряного цвета вокруг селектора не обязательно отщелкивать
Un auto muy confiable
May be interesting to see how you can solve the aux problem. Chinese sx4 sedan has an aux.
+Евгений Белкин Google sx4 aux and there are videos on UA-cam.
volvosweden yours is way better ;)
Please - what is the type of the bulb? i want to buy on ebay or something
ty
Am sure theres an LED version somewhere .... U might even can grab an orange/red colored one
Mi Suzuki sx4 2010 se apago coriendo.creo que es el alternator
Какой размер лампочки или как называеться или дайте сылку где заказать
Do you need a Suzuki 28181-62J10 bulb? Is there no compatible replacement bulb?
Use any W1.2W bulb
Thanks a lot, saves some trouble.
Сколько лет машине?
где можно купить?
5++