I did do a job where the drawer fascias had curves on them but can't remember if I used this 😅 Flick through the vids until you see a dark oak veneered drawer unit, as I may have used it then 🤷♂️
Hi. How are you finding the katsu router? Considering picking one up. I usually use a router for installing intumescent strips in fire doors 15mm wide 4mm deep.
Hi, It's very good. I've had no probs with it in the 2 or 3 years I've had it. I've only used it for round overs, but I have no reason to think it can't do other jobs 👍
@@hammy1988 Cool! I put the link in the description for you. If you arnt happy with it amazon are good at returning thiings. But im sure youll like it cheers!
I bought one of these after seeing your video last year. It now sits in the corner of the workshop gaining dust…. The blades on the cutter weren’t good enough to cut the oak Veneer and the black plate that the iron edging sit on while being fed through the machine would get to hot and start melting the glue before you would even start rolling🤦♂️
That's a real shame. I haven't had any of those problems whatsoever, and I've gone through 100's of metres of veneer and other edging. Would you sell it?
@@thelondoncraftsmanworkshop No Don’t use it. we assemble our furniture in units so I think it would worked if we did just had panels and boards. Ah well always keeping my eye out for easier/ faster ways to do the job.
Lovely. Thank you. I just start to use it after I bough it from 8 years ago, just resrarting the joinert ! GOD bless you!
Glad it was helpful!
Cheers Ryan
I have a bathroom vanity/closet job coming up that needs lots of edgebanding. This video convinced me to make the investment. Thanks!
Great video! I've been looking for one of these for a while
Cheers mate, they are pretty good for the money!
See you soon
Дякую . Все чітко пояснив)
Amazing thank you very much
Ryan
have you tried doing curves with this machine?
I did do a job where the drawer fascias had curves on them but can't remember if I used this 😅
Flick through the vids until you see a dark oak veneered drawer unit, as I may have used it then 🤷♂️
hi mate, is this melt glue that you buy and put seperate?
Hi there can I ask where u got the rail and ratchet clamps from? Thanks
What is the box that you have it plugged into
Without watching the video back, I think it's a power pack (big battery ) 👍
Hi
I’ve some oak veneer to edge but all the edges are at 45 degrees, will this only do
Square edges?
Thanks
Hi yes this will only do square edges 👍
Have you tried it with pre-finished / pre-glued wood banding
Hi just the 0.5mm pre glued wood veneers 👍
Hi. How are you finding the katsu router? Considering picking one up. I usually use a router for installing intumescent strips in fire doors 15mm wide 4mm deep.
Hi,
It's very good.
I've had no probs with it in the 2 or 3 years I've had it. I've only used it for round overs, but I have no reason to think it can't do other jobs 👍
@@thelondoncraftsmanworkshop fantastic will give it a bash do you have an affiliate link?
@@hammy1988 Cool!
I put the link in the description for you.
If you arnt happy with it amazon are good at returning thiings. But im sure youll like it cheers!
Where is the best place to buy the edging?
There's a dedicated edging website, I forgot the name, Google iron on edging and you should find it
I bought one of these after seeing your video last year. It now sits in the corner of the workshop gaining dust…. The blades on the cutter weren’t good enough to cut the oak
Veneer and the black plate that the iron edging sit on while being fed through the machine would get to hot and start melting the glue before you would even start rolling🤦♂️
That's a real shame.
I haven't had any of those problems whatsoever, and I've gone through 100's of metres of veneer and other edging.
Would you sell it?
@@thelondoncraftsmanworkshop Hi yes I would. we are based in Nottingham though.
Did you end up selling your machine?
I still use mine weekly
@@thelondoncraftsmanworkshop
No Don’t use it. we assemble our furniture in units so I think it would worked if we did just had panels and boards. Ah well always keeping my eye out for easier/ faster ways to do the job.
@johnbarker29awesome well if you are selling, let me know how much.
If its worth it I'd keep it as a spare 👍
Im interested mujhe yha machine chayiya Kaha milega kaise milege