There are not many videos that show these details on these older cars. Thanks for posting it. My 96 LeSabre is identical. The washer fluid tubing on the passenger side wouldn’t connect to the hose barb on the spray nozzle after I removed the nozzles for cleaning. I had to get under the cowling and reposition the tubing so it’d accept the hose barb on the nozzle. Your video is the only one I could find, and I looked at a lot of them before finding yours, that matched my wiper arm type, even the cowling. Thanks for posting this. You helped me save a lot of time and difficulties that I would have gone through. And probably saved me the replacement cost of new wiper arms, as I might have easily broken them trying to get them off without seeing your instructional video. Thanks again!
@@203repairsct3 I second the above comment-thank you. this saved me today. one of my wiper arms just popped off for no reason. thanks to this, I think I’m going to be able to fix it no problem!
If you hold the wiper blade up while you lift the pin then rock it back in forth it will come off easy. Won't need to pry on anything. Then put it on the same way in reverse and you won't have to beat on it
I have a 99' Lesebre and it's and so hard to find info on how to fix these little things. I have a water leak coming from under the cowl somewhere and it's a design just like this one. I believe it's needing sealing around the vent that comes up. I replaced the front window which did nothing but when I duct taped the whole cowl to seal it to see if that's the issue is almost stopped and was minimal water getting in. So I am sure it's leaking from in there and anyone with idea's PLEASE comment to my comment....LOL. I need info bad and no one says what it is and no I have no sunroof it's for sure the cowl from it almost stopping from taping it. Now I took off the tape (no rain and only leads on the passenger center when it rains and somewhere on the drivers side the same) so I think it's that square in the center of the cowl where I can see it isn't sealed. Please tell me anything I will take all advice!
There are not many videos that show these details on these older cars. Thanks for posting it. My 96 LeSabre is identical. The washer fluid tubing on the passenger side wouldn’t connect to the hose barb on the spray nozzle after I removed the nozzles for cleaning. I had to get under the cowling and reposition the tubing so it’d accept the hose barb on the nozzle. Your video is the only one I could find, and I looked at a lot of them before finding yours, that matched my wiper arm type, even the cowling. Thanks for posting this. You helped me save a lot of time and difficulties that I would have gone through. And probably saved me the replacement cost of new wiper arms, as I might have easily broken them trying to get them off without seeing your instructional video. Thanks again!
thank you appreciate the comment , i love working on this car , and i love to see cars being fixed and maintained rather than scrapped
@@203repairsct3 I second the above comment-thank you. this saved me today. one of my wiper arms just popped off for no reason. thanks to this, I think I’m going to be able to fix it no problem!
If you hold the wiper blade up while you lift the pin then rock it back in forth it will come off easy. Won't need to pry on anything. Then put it on the same way in reverse and you won't have to beat on it
I have a 99' Lesebre and it's and so hard to find info on how to fix these little things. I have a water leak coming from under the cowl somewhere and it's a design just like this one. I believe it's needing sealing around the vent that comes up. I replaced the front window which did nothing but when I duct taped the whole cowl to seal it to see if that's the issue is almost stopped and was minimal water getting in. So I am sure it's leaking from in there and anyone with idea's PLEASE comment to my comment....LOL. I need info bad and no one says what it is and no I have no sunroof it's for sure the cowl from it almost stopping from taping it. Now I took off the tape (no rain and only leads on the passenger center when it rains and somewhere on the drivers side the same) so I think it's that square in the center of the cowl where I can see it isn't sealed. Please tell me anything I will take all advice!
I'm going to try this myself. Thanks for the video. Wish me luck.
good luck and hope the video helped
My cowl keeps getting stuck on the passenger side wiper bearing thing