Emergency Garden Fence Repair After High Winds
Вставка
- Опубліковано 23 гру 2023
- It's important that when a section of fence comes down due to wind it's quickly stabilised so it doesn't progressively bring down even more due to it's own weight.
Proper DIY Patreon Page: / properdiy
🧰 The tools and equipment I use: www.amazon.co.uk/shop/properdiy
The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do. As an Amazon Associate I earn from qualifying purchases. - Навчання та стиль
There's a saying in the woodworking community: "You can never have too many clamps". For a reason. That fence repair job would have been SOOOOO much easier with a couple of decent-sized Irwin Quick-Grip bar clamps to hold the various components in place while you hammered or screwed them together.
No matter what your level of DIY skill or interest - every homeowner needs (at least) a couple of decent clamps. A clamp is actually better than a mate or assistant on the job. Clamps never complain that you've blackened their fingernails with an errant hammer blow!
Much respect and thanks for your channel. I've used several of your videos as I've transitioned to home ownership here in the UK from the US.
I was thinking the same thing. Done a similar job on my mother's fence last year, but didn't have enough clamps, ratchet straps worked even better to hold them in place while I screwed in the braces.
An easy way to do this if the fence isn't fully over is to use rope and a truckers hitch to pull it tight instead of the pailing for the bracing. A small warning would be to always check the ground before driving a stake; I had to brace the broken fence when I first moved into our new house and put a star picket straight through my buried charged downpipe. Thought I'd hit a water pipe when water started bubbling up from the ground!
Nice red gloves, glad your hands were toasty warm during the repair Stuart, But at least you're not sucking on the red corporate teat for all its worth, when something's on your channel we know its because it's worth it and unbias and not an underhanded shill advert in return for free stuff.
Nice job Stuart. Could you have nailed the wood on to the other side of the stake so you could nail it right handed facing the other way ?🤔👍
It's also a GOOD plan to put some post tops on so that the rain doesn't soak into the post. These can easily be made with a chop saw plus they look very decorative. Just before fixing them I cut an equivalent size piece of plastic sheet to sandwich between the top and the post. Perfect.
Get yourself a left handed hammer Stuart🤣 Thanks for a great year of diy tips and Merry Christmas 🎉
😂😂 ...but hang on .. can't you get left or right handed roofers\slate 🔨😂
You should have used your dewalt impact driver and screws, secured the diagonal board to the stake first, then level the post while attaching the diagonal board in the correct position. Just an FYI.
Looking forward to more content in the new year.
Cheers and Merry Christmas.
It’s Sunday morning and I have to fix the fence after a few panels blew over. A notification came up for this video just as I was thinking about how to repair it. Thanks!
Love the fact you're out there in the elements with a spirit level on a temporary fix! 👍💪
Had to do something similar in my garden a few years back... howling wind, driving rain, head torch, driver, screws and a wife shouting at me it doesn't need to be straight and upright! 😂
Great job Stuart, hope you and yours had a brilliant Christmas, all the best for the new year to come.
If anyone deserves a nail gun it's you Sir. Thank you for delivering great content this year, although its the humor that keeps me and Mrs W watching.
You did a great temporary repair here. Great video Stuart! If I may wish, could you make video on fixing the fence in a couple of months time? Would love to see it! I know you've sort of done this already, but why not another video? I'd love to see it and I'm sure many others as well.
Merry Christmas and a Happy New Year! 🎄✨❤
As long as i can hear those words 'that isn't going anywhere' im a happy viewer
Where we live people have slatted fence panels with very small gaps so you still have privacy but the wind can pass through. Otherwise the concrete fence posts are rock solid but the timber panels just bow and then break
Cheap alternative for nail gun in this specific case is use a quick clamp as that can be your third hand and then you can use your dominant hand to nail after.
Could have used clamps to hold wood while hammering
good job Stuart! And I'm sure I speak for most if not all of your viewers: we certainly appreciate all the effort you put into your videos: the filming and editing: truly top notch!
For you and Mrs Proper DIY: have a merry Christmas and all the best for the new year!
Creep
@@rodwilkins1614 loooooooooooool
Always a good explanation in your projects. Mary Christmas 🤶🏼🇸🇪
Sod’s law…. Merry Christmas Stuart!
PS Mrs has the DeWalt 2nd fix nail gun under the tree. Her face will be a picture!
Great work, Merry Christmas!
I hope Santa brings you a nail gun for Christmas Stuart! Have a Merry Christmas and a Happy New Year.
With our love of yellow tools I hope they get the many hints lol . All the best
I had to do exactly the same thing. To save hammering in lefthanded tied a rope around the top to pull the post level-ish then stood on the rope whilst nailing.
Merry Christmas and a happy new year to you and your family, all the best for 2024. Can't wait for your new vides.
By the way merry Christmas and happy new year Stuart, look forward to seeing you next year 😀
You need to make sure your wife and kids see this video so they know how much you need a nail gun . My husband has been a carpenter for over 50 years and his dad before him. He has every tool known to mankind. But yet somehow he still needs something everytime we go to the hardware store.😊
Merry Christmas to you and your family!
Hi good video thanks - I use a couple of 6 inch G clamps at the top and bottom of the strut to temporarily hold it in place to the post and stake whilst I ferret around for my hammer and nails ( or drill, screws and screwdiver) or go and have a cup of tea. Easy to adjust, too.
Merry Christmas to you and the family & Happy New Year too 🎉 🎄 all the best for 24 🙌 from Scotland 🏴
Happy Christmas PD. Have a great 2024 full of DIY Projects.
Happy Christmas
Merry Christmas & Happy New Year to you and your family!!
Merry Christmas mate from Down Under. I wished I had neighbours like you and Keith when I lived in Blighty but now I have to take your tips from Australia. Merry Christmas mate 👍
great for a quick fix, but long term you should just forget about wooden posts and replace them with metal ones
Merry Christmas
My company always uses stainless steel nails with all fencing. Treatment eats through galvanised nails. Never use screws with fencing either as winds blowing the panels back and fourth will snap screws in no time at all.
Any posts used for fencing will always need replacing at some point the contractor weren’t being naughty soft wood posts life span you be lucky to get 10-15 years with a garden with good drainage. So it’s not necessarily the posts a lot of garden are removing plant life and trees. Usually a drainage issue especially being in the uk where it rains 200 days of the year
A whole night of mega winds (xmas eve morn 2023). Looked out the kitchen window at first light with dread and I have the same issue (identical). Looks like I will be busy myself Bah humbug !. Thanks for the heads-up for a quick fix, looking through the garage as I speak, wood, saw, nails, sledge hammer, hmmm? Where did I put my DeWalt gloves lol.
Reminds me of the old saying. "A stitch in time saves 9.
hi stuart thanks for your entertainment and great ideas for 2023 look forward to 2024 merry christmas and a happy new year to you and your family
Very responsible man, grow more trees. They form wind breaks, it may not help you but will help others around.
Birdy
Merry Christmas to you and yours,looking forward. To new projects next year.
Merry Christmas Stuart to you and your family have a great break we look forward to seeing you in the New year
Not sure if you've ever thought about it, Stuart, but a nail gun would have been very useful 😂
As someone else mentioned, you could have held the fence with your left hand and had your right hand free to hammer the nails in. Or you could have used a nail gun, not sure if you've got one as you don't seem to have mentioned it 😂. Merry Christmas!
If you had watched you wouldn’t have commented 🤷♂️
Someone didn't get the sarcasm
@@dg656good - Yes, I suspect that is the case. Or at least I hope it is!
Concrete posts are the way forward much stronger than timber and they don’t rot in the ground 👍
Hi Stuart, that was a quick temporary fix, great idez, maybe Santo will bring you a nail gun for Christmas, Very Merry Christmas and a safe and Happy New Year to you and your family, best regards from a Kiwi living in Australia
Well done Stuart! A great job , I shall look forwards to the forthcoming fencing video. Most splendid.
A friend who likes Milwaukee... Mr Brown?
Great timing Stuart on this tutorial, thank you. Many of us waking up today in a similar position. Merry Christmas.
The key is wrapping the bottom of the post with denso tape before you concrete it in. Remember to bring the denso above ground level. I have fence posts that have been in 23 years and still good. My other fence, that a contractor installed 14 years ago, the unwrapped post snapped last week after 14 years.
Great tip and repair stuart. I believe santa is in screwfix now ordering your nail gun. Thanks for all your videos this year, happy Christmas 🎄🎁
Time to hit the mobile bar Stuart !!!!!! Great video, Merry Christmas
Thanks for all the great fun videos this year Stuart hope you and the family have a Happy Christmas & New Year.
Genuinely had this problem with my fence about 2 months ago and only watched this to see what you suggested. You did exactly what I did 😆
Merry Christmas to you and your family Stuart.
Merry Christmas Stuart and thanks for all of the videos throughout 2023.
Merry Christmas to you & yours. Take care & stay safe.
It is the national boiler breakdown period of the year!
Last birthday my wife got me a nail gun. I think she was sick of me complaining in situations as I see you dealing with here.
A complete game changer!
Great video as usual.
Happy Christmas & new year to you and yours and thank you for the time and effort you regularly put in helping us DIY’s.
Merry Xmas and a Happy New Year Stuart!
looking forward to nail gun review in the new year!! have a good Xmas!
Hi Stuart, thank you for the excellent content this year! Wishing you seasons greetings 🎄😃👍
Excellent as always Stuart 👍 Merry Christmas and a happy New Year to you and your family 👍👍
Hi Stewart,nice and instructive diy video as usual.Happy new year 2024
Nice simple repair Stuart.
To save the need for three hands, perhaps nail the securing board to the stake first with one nail. Then it can rotate around that nail when securing to the fence post, allowing for movement to get it plumb.
Also, would you consider drilling several 25-30mm holes in the fence to allow air to blow through it as opposed to pushing it over? You still have the hedging to provide screening covering up the holes. HTH 😉
Was thinking the same.
A couple of clamps would have helped too.
To straighten up the fence temporarily beforecadding the strut, I'd had screwed a simple block on the OUTSIDE then wedged a temporary outer strut in compression. That would have made it much easier to make final adjustments before nailing the inner strut. Its a good trick if you haven't got long arns or the internal hedge is just too dense to fight with.
Hi Stuart, if you had gone the other side of the stakes you could have nailed them right handed instead of cack handed. Can we expect to see a new video next year about your new nail gun purchase? Any way enough mickey taking, another great video. Merry Christmas and a happy New year. Keep up the good work in 2024.
Nice work... your efforts and channel is very much appreciated
I thank you for your educational videos throughout the year, not to mention your humour, and hope that you have a lovely Christmas with your family 😊
I apprechiate it, and Merry Christmas
Nice quick repair Stuart, hope Santa is good to you. Have a Happy Christmas and NewYear.
I just had the same. I've got a field at the side of me, so I braced it on the side it was falling over which I found easier than trying to pull it forwards. Plus I didn't really have the option to do it the way you have. It's only temporary anyway
Your friend Mr Milwaukee should get you a nailer 😂😂
Hi Stuart great video as always. Would like to wish you and your family a Happy Christmas and a very Happy New year
Just a quick thank you for the pre-Christmas, one-handed camera sacrifice ahead of the holidays Stuart. Have a great Christmas and a very happy New Year. 🎉
Again, good tricks and tips..have a great chrimble 😊 + + +
Perfect tutorial, Merry Christmas to all at Proper Diy HQ
Nice one and well done Keith for sending him some gloves
If you use a length of rope and a stake to bring the post up vertically plumb, you can measure and fix the bracing timber accurately without struggling.
Excellent video as ever! I've had the identical problem a couple of weeks ago and followed this exact process to leave a full repair until spring.
I would replace all you posts with metal Durapost posts. I have read that they can withstand winds up to 110mph and that would be good for the exposed position of your fence. I have done a fence with them and would never go back to the hassle of wooden posts, having to pain the bottoms of the post with butumen paint to prolong the life of the post, smaller hole to dig plus think Durapost got a 25 year guarantee. I am very pleased with my fence using them. I hope this helps.
Did Father Christmas bring you a Nail gun for Christmas?
Not heard of the third hand - speed clamps and screw it 😂😂
Admire the stoicism. Have a great Christmas. You’ve earned an extra mince pie.
My temporary fencing repair like this is still in after 10yr & the fence hasn't moved 😅 When we had the large allotment when did any fence we braced it & usually built a lean-to on it, a fence & storage. The main problem with modern fencing, especially with feather edge boards or panels it doesn't let the wind through, like a picket fence, so it takes the full force of the wind.
When we moved into our house in Lincolnshire two years ago, we wondered why the former owner had chosen to erect criss-crossed lattice fencing with concrete posts.
After seeing historical photos of the garden and experiencing Lincolnshire winds, we know EXACTLY why he made the change! My wife isn't keen on the reduced privacy but as the main house DIY'er, I've come to appreciate them! 😄
Merry Christmas 🎅
Good tips there. Merry Christmas to you and the family!
Thanks for making the effort to film and share this Stuart, there's high winds due here again this week so well worth doing before it gets worse !
It's not often I get to give you a tip, but next time you're hammering toward your foot, put the sledge hammer up against the stake, it'll make hammering in that nail so much easier !
A belated Happy Christmas and best wishes for the New Year, thanks for all your great content !
Thanks Stuart, very timely video as I had a post fail yesterday and used your method to brace the post until i can replace.👍
Hope someone read your wish list 😄
Merry Christmas Stuart
Ah, the old "temporary fix". I've got them all over my house and garden! 🤔🤫
Have you thought of using a couple of temporary clamps to help hold the timber while you nail up. Bit of a bodge job ,!
Great stuff Stuart. Stake(s) (sic) three ways! Nicely done. Have a very happy Christmas and a New Year filled with every blessing. Best. PEK.
Very timely video Stuart. With all this wind I bet there are quite a few people in a similar position at the moment. As for nails, my dad always used to say, "if you can use a nail, use a screw instead". Easier to remove when needed. Great job as always. Fence vid coming in the new year then!!
I was always taught “Nails for shear, screws for tension”.
If only you'd had a nail gun 😂 Happy Christmas to you and yours 😊
'Wibble wobble' ?
Is that the engineering term?😂
Happy Christmas mate 👍🏻
Merry Christmas, we had our fence replaced earlier this year and had the new fence posts reinforced with metal fence post braces that run the entire height of the post. Our area has sandy soil and termites and unbraced posts don't last more than 5-10 years.
Looking forward to seeing how a fellow practical-thinking Engineer retiree decides how to replace an always life-limited wooden fence in 2024. Until then, Merry Christmas 🎄🎄👍👍🎅🎅
It does amaze me that you don't have a nail gun given how much other equipment you have :)
The power of Pythagoras. Merry Christmas to you and your family.
top job as always - i deceided to swap out my kitchen sink yesterday and just about everything was against me lol - have a great xmas and new year look forward to more videos in the new year!!
Great video as always Stuart! I’d also take 1No. feather board off each of the panels to allow wind to penetrate through reducing the swept area - at least in the temporary condition until you’ve carried out a full fix - exciting stuff 😀
I’ve learnt plenty from you over the years!
Merry Christmas 🎄
Had you put the bracing on the other side of the posts you would have had your right hand free for the boshing of the nails