Building an Offset Smoker | Part 1
Вставка
- Опубліковано 24 чер 2024
- This is Part 1 of building my own offset smoker! This has been a real fun process and a ton of work. I learned a lot from watching @ChudsBbq building his reverse flow and following some really great builders on Instagram that you definitely need to be following! Let me know how I'm doing and what I can improve on!
You definitely need to be following these guys and seeing what awesome pits they are making!
/ ironoakbbqpits
/ saint_michael_smokers
Here are some links to products I'm using in this build, or similar items if they are not on amazon!
13 Amp Dewalt Angle Grinder - amzn.to/437ReoP
Flap Discs - amzn.to/3UWMIHP
Face Shield - amzn.to/48Cbj7O
Ear Protection - amzn.to/4c10uyY
Grinding Apron - amzn.to/48BS8eq
Welding Gloves - amzn.to/4c19dkM
Pipe Tape Measure - amzn.to/48Les5y
Pipe Center Finder - amzn.to/3IimxUi
My new 4k Camera Set up!
Sony ZV-E10 4k Camera - amzn.to/3OJ3dAS
Extra Batteries and Charger - amzn.to/3OAL3Bx
Camera Gimbal - amzn.to/3ugdLj3
Camera Backpack - amzn.to/3udbsgJ
Camera Tripod w/boom - amzn.to/3nLZ6Zv
Camera Mic - amzn.to/3nzsCRL
External Storage - amzn.to/3ufmguC
Here are links to some of the stuff I use to Film my Videos
Soft Box Lights - amzn.to/3EOHAeJ
Spot Lights - amzn.to/3EZxVlG
Overhead Camera Boom - amzn.to/3MDitOJ
Mic for Voiceover - amzn.to/3ER9E0R
Boom Arm for Mic - amzn.to/3vTqw3g - Розваги
Awesome project, go big or go home🔥👍
I always try to go as big as I can! haha Thanks for watching!
Off to a great start…looking forward to the rest of the project
Thank you! Part 2 is out now! Hopefully next week I'll have part 3 up! It's been a fun build!
Dude metal fabrication is always enjoyable when building smokers and grills at least in my opinion keep up the great work cheers joe 🍻🍻
Thank you! I have been really enjoying the process! I just wish I had a chain hoist or something to help maneuver this GIANT pipe! ha
@@GorillaJoesBBQI don’t know how your finances are at the moment but harbor freight sells cherry pickers fairly cheap or see if you can borrow a tractor with front end loader cheers man 🍻
Or you can also use a floor jack with jack stands and blocks cut to fit to get it up of the ground don’t think it’ll get it as high as you need it but it’s a thought
@@Buzzdbbq56 thanks for the suggestions! I definitely was looking at the cherry pickers, but I found a solution talking with some pit builders on Instagram. It will be in my next video but I actually rolled the pipe over and build the stand upside down and attached it then rolled it over onto its feet haha.
Getting a good start to it! Love the size of that pipe!
Thank you! I can't wait to fill it up with some meat when it's done!
I like how this is starting out. Good call on getting the warranty on the new tool. It will be a solid build. Cheers! 👍🏻👍🏻✌️
Thank you! It's been a lot of fun learning as I go and seeing it come together!
Good stuff. Gonna be the best BBQ you’ve ever had
Thank you! Man I'm excited for it! There's nothing like a real offset when it comes to bbq!
@@GorillaJoesBBQ hopefully it’s the “solution” to all your bbq needs. 😅😎
Man Ive been looking for pipe for the past few weeks just like you this will be my first build and I will be doing it alone as well thanks for sharing
Hopefully me stumbling through this build will help you with yours! I'll hopefully have part 2 out next week and part 3 the week after that! Thanks for watching! Hope you find some pipe!
So sweet!
Thank you!!!
Awesome project keen to see it through to the end awesome work dude from Australia 🦘
Thank you! I'll have part 2 out soon! Got the door cut out and welded together, and got the base attached and stood it up! Real excited with how it's going!
Awesome job.
If I could make a tip or two…
Slow down on your welding. And a small thing, line your seams up on the tubes. Make them all line up on the inside. It’s not much but I’ve been running a fab shop for 10 years and the small things make a difference.
Please any tips you can give I'll take! This is my first time ever doing something like this so I'm open to all tips and suggestions! Thanks for watching.
And the journey begins Joe! Great start 🍻
Thank you! Part 2 coming next week!
Take a flappy disk to your soap stone and sharpen her up 👍🏻
🔥🔥🔥🔥
Thank you for your help!!
It's coming along great!!!!! 🤩 👏 🔥
Thanks babe!!!
Nice build series you have going so far. I'm curious where did you find the 1/2 inch thick pipe?
Thanks for watching! I found a guy in Facebook who runs a demo company and he said they cut these out of a building they were demoing. He has a whole big property full of scrap, could spend all day finding good pieces ha.
I would of did all the prep outside first, then welded inside. Looking good though.
Yeah my garage is a real mess now 😂, I did have a big fan blowing me for the majority of the grinding/cutting but I just didn't want to try moving that pipe more than I had to. Thanks for watching!
That's a hefty pipe! Is it like a half-inch thick?
Yes sir! 1/2" and boy is it heavy 😂 next time when I try to find pipe I'll definitely look for thinner stuff! But it should hold heat great!
@GorillaJoesBBQ it will be an epic pit!
Cheers from Holland, where pipes that thick are nowhere to be found.
Also, propane tanks aren't a thing over here...
Offset smoker builds are really hard