@@ale.xdr07 i got u so first you Loosen the screw to 720° and dual adjust the tension at 4 clicks also you can lubricant with some dayan lube and like some heavy Silicon lube
Happy to see you back again! I am really happy to see that you indeed listened to my advice by switching between the cameras. But I have 2 complaints. First of all is the intro, despite being cool you destroy your avd for no reason. And secondly If you could lower the camera a bit, especially at the beginning. Apart from that great video ❤
Dude! the only so little problem with the V5 is lack of magnet strength, so what i did was i took the magnets from my gan monster go edu and slapped em on my V5 and guess what?? IT FEELS LIKE THE WEILONG V9
This is such a tecnological jump for moyu the cube i think over 15 dolars is not consered a buget cube. But for the price is realy realy good, and be fr the robot is cute
Yo bro im so confused to buy which cube, i already have trained with Moyu 3c and ready to buy a magnetic one do you think i should buy super rs3m magnetic ver 2022 or Rs3m V5 Dual adjustment. Ik that super is more expensive but can you tell me which is better and last longer in lifetime
good question. If you spin the circle to tension it, you will see if you look very close, after a few tensions, the circle will pop back out (reset to the loosest tension) watch very closely if you are doing this.. usually the cube comes with all the same tensions, so just pay attention if you do like 3 clicks on each side... just make sure to keep it even
@@FrenchFryyyyyyyyyyyy disassemble the cube and open the corners and edges to check if all magnets are here (if one is gone, put it back in place, it shoud not be hard)
@@thetallestdwarf7041 well, ball core is indeed the last one of the moyi rs3m v5, the one shown in the video must be the maglev version (without ball cote)
Maybe i got a bad one or seomthing because i keep seeing people saying its fast but mine is noticeably slower than my gan 12 or tornado v3. I have the ball core uv version. I can make it almost as fast but then it just gets wobbly
The more you start to solve the cube the more looser or wobbly it gets that's normal but Gan cubes I probably be the worst. If you let the cube set for a day or more then the cube tightens up and then it turns fine.
@@Opulent_Vision1 and the weirdest is, why i can see your username (not handle@) properly in some specific pages, and in other pages, it shows microstrategy??
not a huge fan of this cube, only picube talked about this, and this breaks easily, but that doesn't make it bad! get it if you want a world class cube and take good care of it(unless you dont like stable cubes, i find this cube's stability a overkill, even though a lot of my friends prefer it over my current main, the guhong pro m 54mm standard, maglev is slower which i recommend, standard is a little uncontrollable but i like it that way)
I got the *RS3M V5* recently and the performance of this cube is just *incredible* 😘
Agreed, Its such an awesome cube and cheap!!
can you help what's the best setup tensionising i do
@@ale.xdr07 i got u
so first you Loosen the screw to 720°
and dual adjust the tension at 4 clicks
also you can lubricant with some dayan lube and like some heavy Silicon lube
@@Cuber_Safi you again lol
Happy to see you back again! I am really happy to see that you indeed listened to my advice by switching between the cameras. But I have 2 complaints. First of all is the intro, despite being cool you destroy your avd for no reason. And secondly If you could lower the camera a bit, especially at the beginning. Apart from that great video ❤
Thanks for the tips!
This is exactly the cube I’ve been looking into! Thanks for the affirmation.
Glad it was helpful!
Love the new style of vids keep up the great work
Glad you like them!
Dude! the only so little problem with the V5 is lack of magnet strength, so what i did was i took the magnets from my gan monster go edu and slapped em on my V5 and guess what?? IT FEELS LIKE THE WEILONG V9
I can say this cube is way better than gan 13 also with the budget
Yeah good thing it's flagship cube, because this is the highest price I could afford for a cube
way agreed
@@Opulent_Vision1Rs3m 2020 or Rs3m v5 dual adjustment
I loev this video style!
Thanks creeper! will make more like this
I want that robot lots
i main the maglev version over the ball core cuz too be honest imo its better
Nice! they feel so similar to me hahaha so I can see why
i love this cube. made multiple pbs
Agreed! same,, its so awesome
Awesome 😎
Thank you! Cheers!
This is such a tecnological jump for moyu the cube i think over 15 dolars is not consered a buget cube. But for the price is realy realy good, and be fr the robot is cute
I like it too
cube head pov: can it walk?😅
Good thing i made the real choice
yesssss
Your still better than me😂
I'm thinking about getting the spring or the maglev. Is it any better than the original RS3M 2020.
Yo bro im so confused to buy which cube, i already have trained with Moyu 3c and ready to buy a magnetic one do you think i should buy super rs3m magnetic ver 2022 or Rs3m V5 Dual adjustment. Ik that super is more expensive but can you tell me which is better and last longer in lifetime
Awesome
Thanks!
Im getting my rs3m V5 BC tomorrow
Thats so awesome! such a great cube
How does it compare to the tornado v3
I think they are pretty close, the RS3M V5 is a little bit faster
AND SMOOTHER
Nice new intro
I'm glad you like it
How do you know whem tensioning it what level your at
good question. If you spin the circle to tension it, you will see if you look very close, after a few tensions, the circle will pop back out (reset to the loosest tension) watch very closely if you are doing this.. usually the cube comes with all the same tensions, so just pay attention if you do like 3 clicks on each side... just make sure to keep it even
@@Opulent_Vision1 , also idk if this is fixable, but I accidently messed up the magnet strengt and I don't know how to get it back to regular.
@@FrenchFryyyyyyyyyyyy disassemble the cube and open the corners and edges to check if all magnets are here (if one is gone, put it back in place, it shoud not be hard)
👍
Anit no way he said gawn
wym
I just got this, but mine is dark teal instead of purple inside. Did I get ripped off? It feels great to me.
no, you just have the best version which is ball core, yours was more expensive than the one shown in video
@@Slayteee Cheers. I thought the last one was the ball core, but I guess confusion is part of the MoYu game, hehe
@@thetallestdwarf7041 well, ball core is indeed the last one of the moyi rs3m v5, the one shown in the video must be the maglev version (without ball cote)
Is v5 and 2024 the same?
no
Hello, i need help with picking guhong pro or moyu rs3m v5 ballcore, please
Go for the guhong if you have faster turning style or if you have a slow turning style go for the v5
Rs3m v5 ball core or tornado v3 standard
v5 all the way for my turning style..... I never loved the v3 but it works better for others
The cube I'm coming from is rs3m super standard so do u think the v5 is similar or not bec I want a different feel
I like gan cubes better because it fits my turning style correctly and the rs3m’s don’t feel that good quality and is very plastic feeling
do you use a frosted or UV coated gan?
@@Opulent_Vision1 UV coated
Maybe i got a bad one or seomthing because i keep seeing people saying its fast but mine is noticeably slower than my gan 12 or tornado v3. I have the ball core uv version. I can make it almost as fast but then it just gets wobbly
Tried a bunch of different settings combos if anyone has any good tips.
The more you start to solve the cube the more looser or wobbly it gets that's normal but Gan cubes I probably be the worst. If you let the cube set for a day or more then the cube tightens up and then it turns fine.
Which version should i buy the ball core or maglev ?
Both seemed very similar to me... but if you really like the cube, just get the more expensive one
@@Opulent_Vision1 how about wrm v9 bc or rs3m v5 bc ?
Hello, what do RS3M and WRM stand for?
no clue! but they are just different cubes
@@Opulent_Vision1 I think no one knows except for the inventor. Thanks for your reply.
wait... you got hacked again?? why your channel name got changed to microstrategy?
I dont think so,,, maybe youtube is buggin
@@Opulent_Vision1 and the weirdest is, why i can see your username (not handle@) properly in some specific pages, and in other pages, it shows microstrategy??
not a huge fan of this cube, only picube talked about this, and this breaks easily, but that doesn't make it bad! get it if you want a world class cube and take good care of it(unless you dont like stable cubes, i find this cube's stability a overkill, even though a lot of my friends prefer it over my current main, the guhong pro m 54mm standard, maglev is slower which i recommend, standard is a little uncontrollable but i like it that way)
woah! it breaks?? I dont have a lot of solves on mine, but this scares me lol
@@Opulent_Vision1 just dont drop it and i think it should be fine lol
Yeah it breaks really easily, especially the uv coating one. The edges of the corner piece will usually chip off at the slightest drop without a mat.
Rs3m v5 is good but ""fragile""
We can say the same thing about gan cubes as well..
::DD