Lovely tut as always, gave so many ideas to work around some works i have of my own. Want to ask, what makes you decide when to use regular flowify and when to use without cut?
Great question! When the geometry we need to bend has enough segments or divisions, it's a good idea to use Flowify without cuts. In this case, the duct pipe already has many divisions in one direction (X), and adding cuts in the (Y) direction is unnecessary at all. Using Flowify without cuts will result in much cleaner geometry since it won't apply grid cuts to the mesh. On the other hand, the pencil model doesn't have many segments; it only has a few at the start and end. If I tried to bend it without cuts, the only part that would have cuts would be attached to the target grid, while the middle portion would remain straight. This can be resolved by using Flowify with cuts or by adding cuts to the geometry before we need to bend it. Therefore, in this case, using Flowify with cuts is the better and faster option. Thanks for watching, and I'm glad you liked it!
0:19 Einen 3 Zoll dicken Bleistift biegen zu wollen, das hat was😏! Aber Spaß beiseite für Neulinge: SketchUp zeichnet Dreiecke unterhalb einer gewissen Größe nicht, und deshalb ist es besser, mit zehn- oder hundertfach vergrößerten Maßen zu arbeiten.
Nyc work...
Thank you! Cheers!
Best of the best!)👏
you're so skilled sir
Thanks for Watching.
Lovely tut as always, gave so many ideas to work around some works i have of my own.
Want to ask, what makes you decide when to use regular flowify and when to use without cut?
Great question! When the geometry we need to bend has enough segments or divisions, it's a good idea to use Flowify without cuts. In this case, the duct pipe already has many divisions in one direction (X), and adding cuts in the (Y) direction is unnecessary at all. Using Flowify without cuts will result in much cleaner geometry since it won't apply grid cuts to the mesh.
On the other hand, the pencil model doesn't have many segments; it only has a few at the start and end. If I tried to bend it without cuts, the only part that would have cuts would be attached to the target grid, while the middle portion would remain straight. This can be resolved by using Flowify with cuts or by adding cuts to the geometry before we need to bend it. Therefore, in this case, using Flowify with cuts is the better and faster option.
Thanks for watching, and I'm glad you liked it!
Nice
Thanks
Excellent - thanks for sharing.
PS - what music is this?
Which part? i used 3 different musics
You need to start making also blender tutorials
I wish I could find some time for that. By the way, I'm not very good at Blender.
0:19 Einen 3 Zoll dicken Bleistift biegen zu wollen, das hat was😏!
Aber Spaß beiseite für Neulinge: SketchUp zeichnet Dreiecke unterhalb einer gewissen Größe nicht, und deshalb ist es besser, mit zehn- oder hundertfach vergrößerten Maßen zu arbeiten.
😅 Thank you for the explanation