We motorize a pallet jack
Вставка
- Опубліковано 21 січ 2025
- Dear subscriber, if you want to support our channel,
buy our merch with a discount promo code "garage54", we accept payment via paypal
www.en.garage5...
For business inquiries: promotion@garage54.ru
Absurdly goofy, guys. Love it.
Make some off road versions of it. lol Then race them!
they need a chain driven version plus 4 wheel drive one
@@kirdot2011 WOuld have to totally rebuild the pallet jack from the ground up. But still keep it functional. Off road palleting!
But it is already off-road
Ice racing with studded or grooved tires. I'm not sure of the offroad capabilities of it
Did you notice what is on his shirt?
It's basically a symbol of his support for the killing of Ukrainians.
So yeah, very goofy... What, a great guy!
Somewhere an OSHA manual just exploded and an inspector started crying.
Ain’t no OSHA in Russia.
@@Chumdo Office of Second Hand Alcohol
@@MarkoDash Office of Seriously Hard Alcohol
@@Chumdo If there is an OSHA equivalent in Russia, it is probably extremely weak compared to the United States' version.
@@scratchpad7954 what did you gain from writing that
Awesome concept but it's like taking off in 5th gear and feathering the clutch. Assuming 7,000 rpm from that little engine and that wheel is 6" in diameter, top speed would be roughly 28 mph if there was enough torque to get it rolling faster. Take that reduction from 4.5:1 down to 9:1 and it should rip.
i doubt it would get much fast than 20km/h. it will likely burn up the clutch pretty quick as is. this thing is almost comparable to one of them pocket bikes. under the right circumstances you can get them up to decent speeds but even with how they are geared they don't really have a ton of torque which translates to them running best down hill. uphill they are sluggish.
@@crazzywolfie it is still way over geared and needs much more reduction. the engine never got to its power band. and recall torque can be gained through high rpm with reduction. power is a function of torque and rpm.
@@iamdestructoman especially with a 2-stroke engine like that. That thing makes no power below like 5,000+ RPM. The torque curve isn't so much a curve on those as it is a flat line with a sudden spike. That engine is meant to run wide open all the time.
I agree 100%. The reduction drive ratio is keeping the engine from reaching it's power band.
The engine is too weak, a stock motorized bike which has 1.4 real hp (the 66/80cc ones, 3.5 "advertised") it goes 30+easily, I pulled my brother on his bike with my motorized bike and 30mph was doable
The engine used in the video has 900w real power, not even near 2.9kw
Russian engines like always :)))
I'm so glad u guys translate it into English I love your channel and the content you put out but I'm not a fan of reading subtitles so keep it up you guys make awesome content
The auto translate does a rudimentary job at best. You can get an idea of what they might actually be talking about. I end up fast forwarding through Vlad's monologues but then I have no idea what's going on.
Are you deaf? Im actually asking lol
@@irgant thankyou for that insight.
You need a way higher reduction. The engine rpm of these is really high and you are killing the clutch.
Ahhh thats very true but I doubt they'll be riding it much after this video, those clutches can take a beating surprisingly, either way you are correct.
Awe Man! I was hoping to see a Load Test! To see how much weight it can push! :)
Load test? I was hoping for the ROAD test where they drive to the store on it to pick up a keg of beer just to see ppl's reactions.
@@UmmmmmmmWhat illegal? :v
@@UmmmmmmmWhat 😂
I used to use an electric one and loved spinning in wet conditions and even wheelying it. My friend made it wheelie and it got stuck sitting straight up with battery acid flooding between his legs 😂🤣👍❤️💛💚
Batteries are normally sealed.
Gotta love bajaing with an electric pallet jack
Did his ballz survive?
@@BritishEngineer obviously these are a different kind of battery because it was a big puddle on the floor. They aren't usually on their side. They were very old machines so maybe that had something to do with it.
All I know is there was loads of liquid what wasn't oil poured out of an electric vehicle and can't think what else it would be!
At one of my first jobs I drove one in a warehouse for spirits. You took a packing list, got a pallet and ran around the warehouse picking up boxes of wine, beer, hard liquor, champagne. You name it, we had it. well over a thousand varieties and an order could be anything from half a pallet to ten pallets or more.
Anyway when you have twenty guys zooming around with pallets stacked high with liquor accidents do happen. And whenever you heard glass breaking people homed in on the accident to take advantage of the mess and get some nice sliding in before the cleaning crew got there. Punch was the best. It has enough sugar in it to get just sticky enough to coat the wheels, almost like driving though a patch of grease...
And these were using old style lead acid batteries. At the end of the day you connected a line that topped up all the batteries with deionized water. So definitely not sealed batteries. Sealed and gel batteries is a pretty new development. If you go back much more than 20 years any lead acid battery you encountered were likely to be the old style with liquid acid and open cells.
Hello from Chicago!!! Nice pallet. I made myself a motorized 26 inch mountain bike with a 2 stroke chainsaw. It does about 40 kph / 22 mph and is a gas saver and people look around and some give me the 👍 when they see it . I use it to go to work and back . Keep the videos coming amigos!!!!
This was a fantastic video. I really enjoyed this pallet jack with a motor. You need to get it moving faster. Thank you very much. I'm looking forward to your next project.
I look forward to the creation of the Pallet Jack Racing League 😊
Turbo or super charged one with nitro
@@Mostafa-vs8bd with V8s.
Looks like you could use a little more reduction on the belt drive! A even smaller pully on the motor and this thing will be awsome!
Next video: "How fast can we go on Lada engine powered pallet jack?" And on the thumbnail we can see Vlad speeding through the airfiled with only shorts and sandals on. :D
Exactly what Im thinking about :D
1st I love how everyone didn't want to ride then everyone wanted it to go fast 🤣
2nd perfect example of adult kids
Been a few since I last watched one of your videos. Glad you are still going!
Normal people "why"
Garage 54 "because we can "
😍
Americans says that mainly*
You made the warehouse staff happy
I was waiting for the "Originally uploaded in 2019." Nice to finally see a proper new video. Thank you BMIRussian
I expected to see this pallet jack paired with Lada engine :D
If I was a kid here in North America, I’d love to have one of these! It would freak people out!
i sometimes miss the time as a trainee. we used to race with those all the time
OSHA HAS ENTERD THE CHAT
Awesome! Highway speed would be hilarious! But good clean, functional job
Thanks for watching and showing love.
Congratulations 🎁🎉🎈you have been shortlisted for a prize !!! Send me a text above to acknowledge your prize .
Man, I've wanted to do that for a very long time! You guys need to get out somewhere you can let the clutch engage though, it wasn't grabbing that whole time. Looks like it should be capable of at least 60 to 80 kph, just gotta get that clutch to engage
I used to get into trouble all of the time riding one of those without the motor. Great stuff 👍 I hope you all are staying safe out there.
And to think they used to call this 'horseplay' at work several years ago-FUN!
I haven't even watched yet but this is gonna be awesome😂😂 one of my best days at work ever was loading a new office space, brand new perfectly smooth concrete floors-we spent most of the day racing pallet jacks against each other🛴💨💨💨
Will these guys be mobilized?
They certainly deserve it considering they have not even commented on it. Either they support it or they are absolute cowards
@@tommylir1170 if they spoke out about in a video the Russian Police would be around in minutes to take them away.
That was very creative. Well done. Thanks for sharing. See you next video. Byes for now.
LOVE THIS CHANNEL!!! ❤️ ❤️ ❤️
Now you need a forklift ticket to operate 🤣🤣👍👍👍
Warehousing Logistics managers the world over will be thrilled to see your new efficiency enhancing technology!
I think a vtwin engine with the cam and ignition timing set up to fire on same revolution would be a fun project what a glorious sound it would make
This is so cool. Imagine taking this to a warehouse
hi.....nice Video :--)) my Tip: smallest feasible toothed disc on the clutch and stronger springs on the clutch shoes....instead of 10 coils only springs with 7 coils. That must be help for better Power
I used to race around with the pallet Jack's in the warehouse I once worked at . Me and others would powerslide around corners and such. One thing we always noticed was, the higher the pallet jack is, for some reason the better it goes. Give it a try
It would be nice if you slowed down the builds a little. I'm always intrigued by how you build all those projects. Keep up the good work.
I have seen people do the silliest things to kill the boredom of the job or just for laughs. This looks promising in a competitive way. Several things come to mind, such as drill powered barstool racing or perhaps motorizing a toilet. I have friends who motorized their beds and some, their couches. One fellow ran down the drag strip (leathers, helmet, roll cage and all), at the helm of a fully arrayed dining table, replete with service for 6. Perhaps a 4x4 porta potty for when you REALLY need to get up and GO!.....lol.
I use all different types of pallet jacks every day of my life and ive always wanted to ride one lol
Yup soo want one of the pallet jack to zip around a warehouse! 🙂🙂 Now that is shit loads of fun! 👍👍 Yup remember racing pallet jacks in a warehouse many years ago & during lunch time too! 🙂🙂🙂
And next, that Motor in a Lada 🤣👍🏼
The look on everyone’s faces when you pulled it out of the garage. 🤣
Ahahaha I used to work at a Circuit City electronics store years ago when I was in high school and my manager an I were racing these things (without motors, obviously) around the main track throughout the store after the store closed one night and my manger ended up crashing into a washer and dryer set and damaged the hell out of them while I crossed the finish line for the win!
But what happens when you motorize the pallet jack with that engine you showed in the intro?
Or a v8ls lol
You guys have the most original content.
you guys have the greatest ideas 🤣🤣🤣🤣🤣
Now u guys having Fun. Now u need Bigger Skate wheels and handlebars
Once again another awesome experiment. I used to ride the pallet jack like a scooter everyday after work when putting it up at the end of the day. Would be fun as hell with a motor. Anyway awesome video.🤘
Amazing video effects !
Wow they are the best amazing how they got that to work so well it's faster than a Lada.
garage 54 is best garage
Do you know what else would be cool? - How about a motorised pallet? You could chase each other around the garage!
Really nice job.It’s always cool to see people build something different that doesn’t exist.
I'm a crown triple center rider operator id love to ride one of those haha
it looks great, it works perfectely , i want one
It needs cvt transmission with massive reduction initially. They are easy to come by, Chinese 50cc scooters and Chinese 50cc ATV/quads. Primary side just slides on a bronze bushing. Ditch the stock centrifugal clutch, there is a centrifugal clutch already on the secondary side cvt. With a cvt you'll get 12-16mm primary side initially, tuning the weights on the primary side should help pickup from standstill. Finding a secondary side cvt with correct diameter should be easy, I think it's very close with the most common cheap ones for 50cc quads although those machines have additional reduction in gearbox and chain/sprockets. I think you'll need another reduction before the cvt, should be easy enough using the same principles as demonstrated, belt and lathe turned acetal/POM pulley. With cvt it will go 1:1 at full speed so it will cancel out the last reduction.
Dude you took the dream out of my head😂😂😂
Great idea, thank you! Do I hear "pallet jack derby"?
The translation was excellent American English, to me ears!
One thing, the operator might need an air tank and breathing apparatus when unloading a long van trailer. Thanks again!
Maybe a brake with shoe to wheel contact could be incorporated into the handle angle, and the motor could move to on top of the a-frame, to keep the original turning radius? Thanks again!
Good shit a new tool making moving stuff easier but I would also figure out how to make the lifting motorized with a overrun clutch and such
Literally was thinking about this yesterday😮
This is what the internet is really for!
Nice name for a pump truck.
Great idea but it's going the wrong way it's easy to pull one it's hard to push one other then that good job.👍✌️✌️👌💯
OMGGG....
THIS IS GREAT!
If it was engine from FS450 you would go 40km/h no problem maybe even more, because only Stihl engines were designed properly to have torque. Other knock off engines just don't have any torque at all. I know from my experience because I earn money by grass trimming..
I beat the hell out of my stihl equipment and it keeps asking g for more. You can't beat stihl. Idc what anyone says.
Not to mention they weren't giving the clutch a chance to lock in just rolling around the shop
@@joshuagibson2520 And I never use Stihl mineral oil. Only 2% mix of premium gasoline with Casttol POWER1 RACING 2T
@@REDLINERUNNER I run 87 gas and whatever 2 cycle oil I can get my hands on and mixed 50:1. Occasionally (every 3-6 months) I'll clean out the spark arrestor and change air filter. Other than that I do nothing except run them completely out of gas if they're going to be stored more than a month.
@@joshuagibson2520 The best oil for sure is this because it's for racing engines.
Truck battery with the truck Startermotor would have been much better!!
Make it chain driven with the starter solenoid next time
Nice toy!!
I don’t need it, I definitely don’t need, I don’t need it, I don’t need it. I NEEEEEEED IT!!!!!!!!
You bought new engine, made custom holder for it, spent hours of work and you end up with bad reduction ratio. Clutch is wearing pretty hard whole time and you are barely moving. You know it, but still released it as finished work. Its shame that you never finish your ideas completely, because these ideas are pretty good. Anyway great work. Thank you from Czech ;-)
Those things are so much fun to skate on.
This is almost exactly like the kind of thing I like imagine driving around my store on, it would just be powered by magic.
Amazing ideas
Lifted Off road pallet jack next.
They do make them "all terrain" they are called. I've put gulf cart front hubs on the steering end jack it up high and cut a tube over the jack to keep it up add a sub frame use some trailer axles and huge for gulf cart wheels they sell the hubs a NORTHENTOOL but I cut the front end off old gulf carts. I've have a few I use they roll nice in the grassie areas
I worked in a warehouse for the Sumer and I
Used to use the jack as a scooter
Even Russians know damned well that almost every person who has ever worked in a warehouse has, at 1 time or another, engaged in a good old fashioned pallet jack race!
This would be my thing at work!
Yay Gollum is back with Paypal :P
Absolutely disgusting how you dont distance yourself from the crimes comitted by your country
previous job we had an electric pallet jack i used to sit on it and drive around. But on polished concrete freshly cleaned and a 1,5T full pallet of beer... i tried to take a corner and ended up being sandwiched between the wall and the jack. Left foot was crushed...
I use to work at FedEx and the ground crew would always roll around on those things including myself. If you really pushed those things you'd go a pretty decent speed, good times.
So went with belt drive instead of chain... VERY Classy.
Need a bigger motor! Maybe a v8 with 4 barrel carburetor and headers! Maybe a 4 speed manual!👌😂👍just kidding great video boys!
Hannibal and his A-Team strike again.
Now grind the rear disk down to as small a diameter as you can, and mount a bigger front pulley on the front... Get some SPEEEEED up in there! hahaha AND, mount 2 rubber pads at the back, so when you woer the deck the rear wheels meet the rubber pads you get rear brakes! 👍🤣🤣🤣 😎🇬🇧
I did I used to race the pallet Jack I was fast!
Next put another motor on the other wheel. Now that would be something wild .
Much better and more practical than these silly e scooters we have these days
Thanks for watching and showing love.
Congratulations 🎁🎉🎈you have been shortlisted for a prize !!! Send me a text above to acknowledge your prize .
I converted an electric scooter to gas once, the small clutch couldn't handle direct drive. Ended up putting a Jack shaft on it. Worked out much better.
😁😁😁👍🏻
Hello from Finland 🇫🇮
I can smell the clutch from here.
I love this channel lol
That is awesome, keep the great content coming!
When I was young I worked in a grocery store we used to tear around on the floor on these things
My boss: YOURE FIRED
This boss: "COME HERE" *adds a motor to it*
Inovation of year:)
I used to race these when I worked at Walmart
brilliant these things as scooters 👌
As Tim Taylor would say”more power”
I used to get into so much trouble for riding the pallet jacks around in the stock room of the supermarket. Sure beats walking I told her/it/them.
furself
No one: We need to mobilize EVERYONE
Everyone: Except Garage 54
Interesting motor bike.