Great model! Works really fine and smooth. Also, the level of cooperation shown by them is truly exceptional,any doubt and they would clear it themselves on a call. All in all, the purchase was worth every single penny. Would definitely recommend you.
Sir please reply in wet dry segrection machine video iam commented three time but not reply and their are too much problems because I have to submit it tomorrow evening🥺🥺🥺🥺❤❤i loved your all videos ❤❤
hello! about the shaft adaptor, is that required for the servo motor? are there other alternatives for this as it is not locally found within the Philippines?
sir if we order the readymade one will the code be already implemented in the archuido or do we have to implement it also what if during delivery the project gets damaged
Sir, I connected the whole setup properly, and the lights are also working. Metal and dry sensors are working, and the wet sensor is not working. How can I clarify the setup of Arduino in pc.. Please reply and help
@@skynet-robotics😢😢😢😢 Which country are you from? Ordering from Amazon isn’t that cheap compare to yours I am seeing here. Please 🙏 can you share with me a link for wholesale suppliers? Please 🙏 I need it very urgently and we can discuss business if you are down thanks 🙏 for your swift response 😊😊😊😊 Plus I will drop a message for you on your WhatsApp if you would reply me thanks 🙏
@@skynet-robotics thanks for the response, sir! Is it okay if we don’t use alternative anymore? Or if it is really needed (im talking about shaft adaptor) what can you suggest?
@@drei7154 hello, we don't use the shaft adopter and we use a rubber band as an alternative and we put a cardboard underneath so we can glue it, hope it helps!
i only have the classic arduino uno microcontroller and i don't have any additional pins can you give me a circuit diagram and code for the classic arduino?
Servo rotating? If a beep is coming from buzzer when u placing metal waste then arduino connection is ok If not then check code uploaded or not If yes then check stepper
what seems to be the problem here sir? avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfc
Today is my order delivery date parcel has not arrived yet what should I do I have been waiting for 10 days. Now what should I do I have payment online to you
Ideal Delivery time is 3-7 days It will deliver on time Maybe it's due to a festival rush and it will be delayed 1-2 days only . Kindly wait if parcel not received you will get complete refund.
No COD option can't be open because students are always confused about project selection and cancel order at the time of receiving. It will make a big loss of the seller because delivery charges and return charges have to be paid by the seller . So no cash on delivery.
u need to delete all old servo library files from my document-->Arduino--> Library folder Download servo library from video description and add as shown in video
project kit at very low price
www.skynetrobotics.in/products/dry-wet-and-metal-waste-segregator-components-kit
Great model! Works really fine and smooth. Also, the level of cooperation shown by them is truly exceptional,any doubt and they would clear it themselves on a call. All in all, the purchase was worth every single penny. Would definitely recommend you.
Sir? Can we replaced the battery into to solar panel??
Can i use metal touch sensor on the place of proximity sensor
@@vsv264 no
@skynet-robotics thanks
can you please make an garbage segregation and monitoring if the three waste put together?
Stepper Motor is just vibrating and servo motor works only at first when we connect the battery, what could be the problem? Does it need more power?
Power issue
Charge battery
@skynet-robotics ok
Can we use the nema17 stepper motor for higher load. Sir please reply me
Yes
Sir please reply in wet dry segrection machine video iam commented three time but not reply and their are too much problems because I have to submit it tomorrow evening🥺🥺🥺🥺❤❤i loved your all videos ❤❤
Send me video on WhatsApp 9075800409
Under-rated channel.
Sir, can we trust the delivery? Is it guaranteed that we will receive it? It's important to us
Of course
You will get proper tracking details.
You can message here if the parcel is not received.
Bro we can use soil moisture or rain sensor
Use any
How much will it cost to prepare the same?
Whether mblock coding cn be done for this project?
hello! what type of arduino uno is used? standard? economic?
We can use any model for proximity sensor and steper motor
Use any Stepper but use metal proximity sensor
hello! about the shaft adaptor, is that required for the servo motor? are there other alternatives for this as it is not locally found within the Philippines?
@@marygraceriparip1120shaft adaptor is not mandatory
use any adjustments like BO motor wheel or coupling
Hello sir
can u answer to me how we can use solar based energy usage or by using solar panel and use that as energy wastage
Thank you
The stepper motor and ir sensor is not sensing
sir if we order the readymade one will the code be already implemented in the archuido or do we have to implement it also what if during delivery the project gets damaged
You will receive completely ready project
You hv to just switch on and ready to present.
If u order ready made project
then shoot video while unboxing
Can we use 9 Volts battery as a supply?
Yes
sir i have a question. is it normal for the stepper motor to get warmer??
Yes it's low cost stepper heats
Hello Can we use Ultrasonic sensor if proximity sensor not avelable.
No
sir. just asking can we just use the female pins on the board? and solder the 3 by 4 pins?. we're scared to break the board again
Yes
@skynet-robotics thank you sir
Can use NEMA17 for more load?
Can arduino SE be the alternative for arduino uno?
How to fix compiling problem
Error returns code is not 0
how do you ensure that the metal does not get sorted into dry waste with the usage of ir sensor and wet sensor?
Proximity sensor is thr
@@skynet-robotics so the proximity sensor is to detect the metal, what is the ir sensor used for?
thank you sir
Are your batteries charged properly or should we charge it.
If possible charge it
Sir, please reply. If we will use arduino SE, would it still work?
Yes
hello, the moisture sensor is not coordinating with the servo and stepper, can u simply tell what's wrong?
Adjust Sensitivity of soil sensor by rotating potentiometer
Or what's app me video
Bro wt type of sensor are used to detect the small rock
Sir do you have a procedure/methods of this, need lang sa among research.
The both male and female connector give the same circuit?
Yes
Lovely idea 👌
Thnx👍❤
Sir, I connected the whole setup properly, and the lights are also working. Metal and dry sensors are working, and the wet sensor is not working. How can I clarify the setup of Arduino in pc..
Please reply and help
Open serial monitor and you will get reading of all sensor
the only working sensor is IR and it detects everything. what is the possible problem?
@@markgiomolano2801 reduce sensitivity of ir sensor
I would love to get those kits of yours but I don’t know how easy your platform is to collect money from local currency like Nigeria 🇳🇬
Sorry international shipping Not available
You can order component from Amazon in u r county
@@skynet-robotics😢😢😢😢 Which country are you from? Ordering from Amazon isn’t that cheap compare to yours I am seeing here. Please 🙏 can you share with me a link for wholesale suppliers? Please 🙏 I need it very urgently and we can discuss business if you are down thanks 🙏 for your swift response 😊😊😊😊
Plus I will drop a message for you on your WhatsApp if you would reply me thanks 🙏
Sir, is there an alternative for stepper motor driver? And is shaft adaptor necessary?
Shaft adaptor is connector only
U can use any other alternative
No alternative for stepper driver because stepper need it
@@skynet-robotics thanks for the response, sir! Is it okay if we don’t use alternative anymore? Or if it is really needed (im talking about shaft adaptor) what can you suggest?
Sir can arudiono se be the alternative for arduino uno?
@@drei7154 hello, we don't use the shaft adopter and we use a rubber band as an alternative and we put a cardboard underneath so we can glue it, hope it helps!
Sir i live in punjab state in india will it be able to get delievered there?
Yes
yeh chalta alta hai yaa aise hii??
does this work without using any battery?
5v Adaptor
i only have the classic arduino uno microcontroller and i don't have any additional pins can you give me a circuit diagram and code for the classic arduino?
Is your arduno coded or we have to do coding?
If you want code the I will send with coding
What's the problem if our proximity is sensing the metal but didn't sort in the trash?
Servo rotating?
If a beep is coming from buzzer when u placing metal waste then arduino connection is ok
If not then check code uploaded or not
If yes then check stepper
Sir the ir sensors is sensing the pipe too what can we do
Which sensor IR?
The one which is fitted above the rain drop sensor@@skynet-robotics
@@skynet-roboticscan the gap between the black and white light be the problem??
what seems to be the problem here sir?
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xfc
Problem with Arduino
Try to disconnect and reconnect
Otherwise replace Arduino board
@@skynet-roboticsthanks sir
Is shaft adaptor is neaseasery
No u can do your adjustment
bro can you include LCD display please
If the plastic bag is wet, the raindrop sensor will recognize the same and pour it together. Do you have a way to fix it?
Ok let me think 😇
What if we keep all waste together
@@poojithaalekhya5675 it's limitation of project
is this possible with arduino nano?
Yes
@@skynet-robotics can u give me the circuit board setup? if possible
Helo sir
I have one doubt
In this three waste mixed and it have separately divided is it possible sir
No
@@skynet-robotics I want like that project bro
To which board we want to do
Uno or nano
Can you make video on fire alarm system
Rain drop sensor and stepper motor was not working please tell me the solution for my sciences exhibition
Send photos and video on WhatsApp
Sir stepper motor driver me light glow Nahi kar rahi hai shayad isiliye stepper motor Kam Nahin kar rahi
Sir aap Ka WhatsApp number Nahi mil rahe
Mera 2 date ko regional level exhibition hai to please solution bataiye please
Today is my order delivery date parcel has not arrived yet what should I do I have been waiting for 10 days. Now what should I do I have payment online to you
Ideal Delivery time is 3-7 days
It will deliver on time
Maybe it's due to a festival rush and it will be delayed 1-2 days only .
Kindly wait
if parcel not received you will get complete refund.
Sir can we make this as mini project for E and C engineering
Yes 👍
It will be good if cash on delivery option is added
No COD option can't be open
because students are always confused about project selection and cancel order at the time of receiving.
It will make a big loss of the seller because delivery charges and return charges have to be paid by the seller .
So no cash on delivery.
Servo motor rotating continouslly what to do??
Use 180 degree
I have ordered waste secretion kit can i trust you
Order I'd??
Order id 1284
Hi sir why does the stepper motor don’t rotate when we try it
Send video on WhatsApp
@@skynet-robotics i dont have whatsapp sir i send you video on instagram
Have u figured it out man?
koi confirm karo ki yeh actually me samaan deliver karte hai ya thag lenge???
Khud hi krlo
Hello i want this project ...how to order
www.skynetrobotics.in/products/dry-wet-and-metal-waste-segregator-ready-made-project
After successfully payment what will be the time period for delivery
It takes 2-5 days
Why I am not getting any message from skynet robotics after successfully payment
@@rajvlogs1034bro did you got the product
@@rajvlogs1034 bro did u get the product,is it trustable
is the code still working sir? and can we use this for our project please sir
Definitely code is working
Can you deliver in UAE?
No😊
Hello.I am from Bangladesh,how can I purchase this project?
Sorry, , can't ship to Bangladesh
Helo i am in class 9 so for me this modam cost is not affordable so can u give in less price
can you deliver it in Pakistan?
Sorry can't deliver
hi sir, can you please make an garbage segregation and monitoring with esp8266MOD and arduino mega.
please my final defense is on november.
If i would use arduino nano could you please give me its circuit diagram and code pleaseeeeeee
Same diagram
Sir please give dimensions of the holes to be drilled (the distance between the holes) also do you give the pipes too ? (Pre assembled)
If you want complete project you can message me 9075800409
Hi sir, can i have a schematic diagram of this project?
Circuit diagram available
Aapka website se mene order kar Diya
Ok 👍
Is the order is for all over india
Yes
How much it cost???
4400/-
The servo code shows error always?
Reply pls
u need to delete all old servo library files from
my document-->Arduino--> Library folder
Download servo library from video description and add as shown in video
How to delete
@@skynet-robotics how to delete
Sir pls provide code for this project because if i made project and code not run then my whole hardwork and money gone waste 😊
Code given in the description
Sir the code given in the description is real
Yes definitely.
@@skynet-roboticsthank u sir
How can we see our orders in google
@@sunilchoudhary2587 once your order get shipped u will receive tracking details
Sir please make a electric shoker device
Ok I will
Sir when i tried verifying rhe code it always shows error
Add library
@@skynet-robotics sir I added the library
Bhai two gear motor say remote control truck with wiring making video bone please bhai please 🙏 ❤❤❤🎉🎉🎉🎉😢😢😢😢😢
Ok👍
How to delete the code of library
Not code
U hv to delete complete file
Shift + delete
Can write the code in our tablet
Yes
Hlo bro i have a query can ee talk
WhatsApp me
Can you share the code you have written in the video to make it work!!
@@ritvijain55 code is given in the description
Nice
Thnx
Sir can we make this as mini project for E and C engineering
@@shivalingbyali4987 yes
🎉
Please send the coading
Given in description
Code
Description
5:22 diagram
😅
Sir do you have a procedure/methods of this, need lang sa among research.
Yee