Aqui do Brasil , eu sempre quis por um motor na minha bicicleta mas agora sei como fazer assistindo o seu vídeo ! Obrigado pela vídeo , vou fazer igual (parabéns) .
I don't know if you look at the messages or not but this is the best video that I found cuz I didn't want to do it on the back tire like all the other ones awesome thank you
Looks good, dunno if I want to drill into a original Ironhorse aluminum frame, but with a few alterations to the motor mount, that idler roller can be used as well.
@@albertfingernoodle6416 What about mounting derailleurs both on the back wheel and on the engines's attachment (there is a single cogwheel that you connect to the back wheel with a chain, but in that case you want more cogweels as in the back wheel but maybe not that much of them), so you can have both fast start and high total speed?
What language is that? Congrats for the 13 million views! Even if I would make that bike flight live in UA-cam, I wouldn’t be able to match these numbers.
I rip my calves up on my standard bicycle's gearings often enough, I'm terrified to imagine what that little motorized gear would do to the inside of my knee.
Идея норм, но вот воплотил не айс. Газ нужно было на руль от мопеда ставить, практичнее и приводы от мотора будет удобнее выводить на прямую на звездочку. Лишние заморочки да еще и на сварке. Отвалится через время так как там центрации. Гондота, но требующая доработок и исправлений.
But how did it work when you were Switching the multi gear system Because you gave one top speed Not the top speeds of other gear ratios For the regular That looks like a twenty one speed And you only did one gear set up, Because once I can get my hands-on a motor I plan on Making the bike able to move my 230 pound self To speeds upwards to minimum 30 MPH. But at least this is better than walking distances, Also I wonder how far did you get on a full tank Like total distance Because it would also be nice to know how much range it has, Because this is a trimmer not a weedwacker Or a chainsaw, Because here in the states It is 49CC and lower You don't need a license for it.
So you're basically running direct drive. Because your reduction from engine to the crankshaft is omitted by the opposite from crankshaft to the wheel hub. I've tried that one and it doesn't work for shit. You need to run a big sprocket on the back wheel.
I have the same question, I have been looking for a video on UA-cam about a bike that can change gears but I can’t find one that goes in-depth about it.
This design looks like it wouldn't effect the factory gears /"speeds" that are on the bike, so just change gears while on acceleration like if you were peddling.
The production quality of this is absolutely through the roof! Amazing!! Only legends will like this amazing video🥰
🏃🚄💨💨💨
coming!
He's a pretty smart guy and he isn't afraid to get his hands dirty. Good video.
hello
Sounds like the safest thing I've ever heard of
Yeah dude I really really want to do this to my bike but I can't because I only have one bike
👍👍
👍👍👍🤙
Sur
I commend you on you’re ingenuity and fabrication and building skills. 👍
Bravo legendo, nema bez naših ljudi!
❤❤❤
Perfect project for this virus lock down!!
Aqui do Brasil , eu sempre quis por um motor na minha bicicleta mas agora sei como fazer assistindo o seu vídeo !
Obrigado pela vídeo , vou fazer igual (parabéns) .
Мызраекб
Рррллжжо
Мортмррлр турган
Оп
I don't know if you look at the messages or not but this is the best video that I found cuz I didn't want to do it on the back tire like all the other ones awesome thank you
Looks good, dunno if I want to drill into a original Ironhorse aluminum frame, but with a few alterations to the motor mount, that idler roller can be used as well.
Isso aí camarada. Ficou uma maravilha de bicicleta motorizada. Parabéns.
6395294275
Hii
Hii
6395294275👈👈👈📞👌
nice video ! good luck ! from Mongolia.
Love to watch someone who knows what they are doing 👍🇨🇦👍
lol great job, you made a nice cycle!
Ja mislio ovo neki englez a na kraju ovo nas Balance 😂 totalno sam se iznenadio bravo majstore
Most critical part of the build is getting the drive ratio correct 🥱
Very impressive young man!
Добар си мали, само напред ! Браво
R tdhxjv
💋💋💋💘💘💘💖💖✍✍✊💑💑💏💏💏💏💏💏💏💏💏💋💋💋👄👄👄💋💋💋💋💋💋
Супер!У хирурга тоже будет работа!
Sow cool idea wow im gona give you a like 😮😮😮😮
Nice! You are damn near a genius 😎 👍🏼
That's cool I reckon if you put a smaller cog at the crank you might hit 50 mph👍🏻🇬🇧
Ma svaka ti cast legendo
hehehe
You dont need a bigger motor to go faster, just change the gearing.
Do you mean the derailleur you switch during ride?
@@zielony1212 you need a bigger gear in the front and a smaller gear in the back. Its gonna be faster but not as much torque.
@@albertfingernoodle6416 by 'torque' you mean that it will start slower?
@@zielony1212 yes, it takes a longer time to get the speed up. But it will go much faster.
@@albertfingernoodle6416 What about mounting derailleurs both on the back wheel and on the engines's attachment (there is a single cogwheel that you connect to the back wheel with a chain, but in that case you want more cogweels as in the back wheel but maybe not that much of them), so you can have both fast start and high total speed?
thats badass man good job! definitely gonna build me one
It is used in grass cutters
No shit
Yes
Ovo je vec next level 😏😏
What language is that? Congrats for the 13 million views! Even if I would make that bike flight live in UA-cam, I wouldn’t be able to match these numbers.
Croatian language
Big fan from India Sir💕
Esse cara merece o meu respeito é mais do que um engenheiro. Se a NASA descobriram ele
*дизлайки рукожопы ставят,которые сами нихрена не могут руками делать*
Mah dad:
Are ya winning son?
Me:
Trying to make jet engine from Iron bottle at 5 AM
P
Pp
Ppppppp
Ppppppppppppppppppppppppppp
Pppp
Pretty cool... I have a couple functional weed eater motors laying around, I may have to make myself something 🤣
Very nice! What was your total gear reduction/torque multiplication from trimmer motor sprocket to half shaft to final gear?
Awesome if you were able to reduce the amount of sound it makes and increase its speed it would be an excellent bike
It really is a shame to see people have access to all these tools and execute their projects so poorly, but it was a great vid none the less
I assume no more charging and can travel all day long. Nice 👍
Good work.. buen trabajo.. thanks gracias..
I have 2 trimmers I now my next project. Thanks 😊
it may not be slow but at least its loud and smells like oil and gas.
B☝️
Oh my... I'm urgently need a doctor... Dr. DIY
I rip my calves up on my standard bicycle's gearings often enough, I'm terrified to imagine what that little motorized gear would do to the inside of my knee.
Qomoteyamas
@@leovisfleires9134 713 ENTONCES AHÍ SÍ EL BEBÉ Á
@@leovisfleires9134 anbakua1
@@leovisfleires9134 👆👆👆👆👆
@@leovisfleires9134 гфй1
Trimmer bike my a , that's a purge bike bro love it lol.......
Легче педали крутить чем 2дня на это тратить и плюс шум невытерпимый
I have wanted to see a bicycle conversion that used the existing transmission!!! Good job!!! Maybe next you could try a four stroke engine!!!
Me: mom can I get motorcycle
Mom: no we have motorcycle at home
Motorcycle at home:
I did something like this using an old chainsaw worked like a charm
I'm surprised it was powerful enough. How did it work? Did it struggle during acceleration?
Движок слишком громкий, вся деревня камнями закидает и скорость не убежишь.
9
I appreciate the video with no background music
Посмотрел,и тоже подумал нахрена мне тример😁😁😁,лучше моцик сделаю😊.
Такая же байда )
Да, только проще можно было
Лучше бы моторколесо приделать. И скорость быстрее, да и без шума.
Bravo!
Well that looked simple enough! I"ll get started on mine straight away!!!!
Ruined a good bike to make a deathtrap crazy i like it😎
love it, well done you Sir.
hello
Me: mom can i have a motorcycle
my mom: we have motorcycle at home
Motorcycle at home:
Harley Davidson started out with a model like this
Really? Imagine, i dont even know that guy!
Well, let's go ride this amazing invention 😎
Really it's fantastic 😮
Nice idea good job bro
great work bro!!!!it amazing !
its like sounds of a motor cross bike...nice idea...keep it up👍
Nice bro you very creative
Интересный народ эти Чехи, самолёт у них летадла,машина у них возидла.Интересно ,а как по ихнему ,,повидло,,. Велик порнуха кстати.
I feel like u needed a smaller drive sprocket
And take the rest og acoustic drivetrain off, if crank arms went out.
Recimo kad biše stavio motor od bušača rupa kakobi onda išlo
You are very skilled Doc
This is badass!
Chico inteligente!. Good job 👍👌!.
Como ASER que un carro corsa pase corriente de los fusibles a tanque de gasolina
Amazing.
But u next time made faster bicycle
Amazing your construcción skills, best regards and best wishes for you for this Christmas and happy new year 2023 !
Наматает яйца на звёздочку ,на японском заговорит.
Ахахххааха ну ты крутой юморист))
Как раз искал этот комент😁
Если попадёт штанина в цепь то оторвёт не только детородный орган но и снимет скальп:))))
Да никакой техники безопасности один треск соседи камушек запустят с катапульты
Super ! 👍 bravo !
فققثصبةةن٨عيشظ
Are you taking orders at the moment?? 😃 Great job
STIHL Bike engine ^^ fs 450 ? Use fs865 - after every drive you muss clean your Motor with brush air :D
😁😁😁😁😁😁😁
rose
Brat 😂❤️
cool bro
КАК ОН С ТАКИМ ПЕРЕДАТОЧНЫМ ОТНОШЕНИЕМ СМОГ С МЕСТА ТРОНУТЬСЯ!? ЕГО ЖЕ ТАМ НИ ХРЕНА НЕТ!!!
0
Muito bom
I have a motorized bike and it took 2 months to fix this bike. About time my bike was finished today. LOL
Engineer 👍👍👍👍👌👌👌
Congratulations on your bike now going slower
Ģćhgģľ
B
No entiendo un carajo pero lo sigo viendo 😂😂🤣
😂😂😂😂😂te hace pensar que es fácil pero tiene que hacer un montón de pendejás😂😂😂😂
Amazing, creative, inspiratif 👍👍
Great video do you have a video on using an electric motor?
Идея норм, но вот воплотил не айс. Газ нужно было на руль от мопеда ставить, практичнее и приводы от мотора будет удобнее выводить на прямую на звездочку. Лишние заморочки да еще и на сварке. Отвалится через время так как там центрации. Гондота, но требующая доработок и исправлений.
But how did it work when you were Switching the multi gear system Because you gave one top speed Not the top speeds of other gear ratios For the regular That looks like a twenty one speed And you only did one gear set up, Because once I can get my hands-on a motor I plan on Making the bike able to move my 230 pound self To speeds upwards to minimum 30 MPH.
But at least this is better than walking distances, Also I wonder how far did you get on a full tank Like total distance Because it would also be nice to know how much range it has, Because this is a trimmer not a weedwacker Or a chainsaw, Because here in the states It is 49CC and lower You don't need a license for it.
You are a good professional, man. Congratulations, from Brazil. But, I think your neighbors will complain about the noise.
Tnx bro 😘
What about weight distribution
They don't care they're just making the video for views they don't care if it actually is practical.
Dont you rack your nuts having the foot pegs that far back? But I have to say that is a very cool build.
What a beautiful bit of bodge
excelente trabajo amigo, saludos desde Costa Rica Pura Vida!!!
So you're basically running direct drive. Because your reduction from engine to the crankshaft is omitted by the opposite from crankshaft to the wheel hub. I've tried that one and it doesn't work for shit. You need to run a big sprocket on the back wheel.
Ñ
مكتبmat
الدب القدب
@@josemariacumplidoarias4769 ط
كلبقكاجقكقكفكق مكتبmat
nice bike bro I like it
Ok the first time he rides it... his pants will get caught in that chain.
You know how long it took me to find a video with the gears being used
Соседи подумали, кто там дерево пилет ?
Alguém do Brasil? 2019
👍👍
Eu
Good job bro love it man
very good, wish you luck Happy new year of prosperity and fortune
NO ITS NOT GOOD its VERY weak and uncumfortable
Un grande👏👏👏👏👏
Very good
Thank you.
Could you use the gears that is already on the bike? Like when you Are speeding up shift into a higher gear?
I have the same question, I have been looking for a video on UA-cam about a bike that can change gears but I can’t find one that goes in-depth about it.
This design looks like it wouldn't effect the factory gears /"speeds" that are on the bike, so just change gears while on acceleration like if you were peddling.
@@AceBoy2099 I was thinking if you connect the motor to the pedals you could use it like that
🤣🤣🤣 I reckon it broke down after the video😂😂😂