Xe đạp chế động cơ bằng máy cưa xích The bicycle runs on a chain saw
Вставка
- Опубліковано 8 бер 2021
- COPYRIGHT BY TRAN LONG HO.
Original Facebook fanpage / thánh-chế-mr-hồ-109271...
Main Gmail - longho.tranccc@gmail.com
Name - TRAN LONG HO
The bicycle runs on a chain saw xe đạp chế động cơ máy cưa xích phục hồi từ bãi ve chai
#ThánhChếMrHồ - Навчання та стиль
People are quick to point out things. Not looking at the big picture. That bike for somebody that can’t afford a scooter will give them the opportunity to go to school or work miles away.
This guy is a genius and a hero in his community keep up the good work
Tanggapanpyungib
True, but this retard disregarded the engine cooling completely, and failed to install any air filter, for these jungle conditions.
Cái nào vô tay anh hồ làm
Cũng đẹp hết rất thích vi deo
Của anh...
Anh khéo tay quá! nhìn rất gọn, đẹp.
Nice job. But you also include a gearbox (may be a bike gearbox) to it. Sure it will make speed control easier.
Hay quá anh ơi em cũng đam mê thể loại này
Awesome build Man,Thanks for sharing your project.
Anyone else notice the broken clock tattoo on his arm.....implying that time doesn't matter....incredible patience.....
This guy can make anything out of scrap metal very cool love the videos
Chế tạo giỏi thật 👍
Hay lắm bạn ơi chúc bạn luôn thanh công hơn trong công việc
A giỏi thật đấy thứ j làm cũng dc ngưỡng mộ 👍
Xem đi xem lại không biết chán luôn
Chế thêm cái bô nữa đúng là tuyệt vời
Excelente!!! 👍 Saludos desde 🇺🇾 uruguay!!!
Brasil 🤦
1) He has rebuilt an engine.
2) Made that into bike without readymade parts.
3) It's working.
Hats off to you brother.
Liked and subscribed.
God bless you.
Thank you for your comments
thats what its about. he doesnt buy this shit prebuild ready to screw togather, no. hes fucking building it! thats what makes it so awesome. this shit is REAL. its like an art and there arent so many people like that out there who are even creative enough or have the skills to put something togather like that.
@@Mr_Ho u can go faster if you use the bicycle freewheel gears it should make you as fast as the scooters
@@MrYoshio14 i dont think it will go fast because the rear gears will be too small and the engine will struggle to rev up and the cluch will overheat
Quá đỉnh anh ơi
Quedo bella esa bicicleta 🚴♀️ moto 🏍 genial 👍 bravo 👏 bravo bravo 👏 💪💪💪💪🙏
Đang tìm học làm theo mà k có. Nay vào youtobe thấy anh mới làm luôn
VN có những người tài năng mà cần được đào tạo,giúp đỡ và tạo điều kiện để tải năng được phát triển,từ đó đất nước sẽ có sự sáng tạo thông minh không thua nước tư bản,mong rằng nhà nước cần quan trọng những tài năng và hảy tạo mọi sự ưu ái để tiềm năng này được phát huy cho tương lai của đất nước...
Great work dude, maybe an option is to use the already existing transmission, and add another reduction stage so your clutch doesn't suffer as much
Trẻ mà giỏi toàn diện. Sức sáng tạo vô cùng lớn. Ở nước ngoài thì vô cùng trển vọng
Chế tạo giỏi thiệt Đúng là người Việt Nam Vietnamese
Awesome!!! I love this!!! Bravo sir!! 👌🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Thanks for your comment
Quá siêu anh ơi chế anh sáng tạo nhiều clip mới nè chúc sức khỏe nhé anh
На свалке как в супермаркете все есть .
Lấy con máy 80cc ve chay chế xe chạy thử đi anh
Bạn này có tố chất thông minh..mình cũng hay chế nhưng ko có thời gian vì phải kiếm tiền.với phần mức đam mê chế cháo thì mình thua bạn này rồi..
Đúng là thiên tài👌👍
Add a scooter transmission and it will get less stress and longer life maybe?
Great skills man; would see that kind of work being very much valued by anyone with a need of the skills.
Á đù căng à , chạy như xì Po chứ bộ giỡn heheee
Tuyệt vời em ơi
Respect la orang belah sana Klau buat barang terbuang jadi je terbaik😊😊😊
Break off the blades on the fly wheel.. great work .😊
You took a lot of second-hand junk, and created a working scooter. Truly impressive, WELL DONE!
Buen video, La bici quedó muy buena.
,awsome! Nice done ! But , i would made a frame-tube, i hope it dont brake , but realy cool! ✌🏼🇦🇹😉👍🏼
Tét xe thôi mà que gậy ghê quá
Nices idea bro good job its amazing fantastic work from san diego ca usa 3 19 2021 thank you for sharing your video
thank you
Я не перестаю удивляться твоему творческому подходу к делу.👍🚲
Làm thêm cái lá chắn nữa bạn ơi! Cánh quạt quay nguy hiểm
Nhìn thèm thật. Động cơ nhà thì nhiều mà k biết làm
Hay đấy, nhưng hao xăng lắm kaka.
ไอเดียร์เจ๋งมากครับ👍👍👍👏👏👏
Rất sáng tạo
Cái này thiếu miếng nhựa đậy gió tản nhiệt, máy chạy ko nỗi đâu
Quá đã😍😍
Nice work - BUT that bottom tube on the frame NEEDS to be there! At the very least relocate it to above the engine or bend a tube to go under the engine and make a cradle for the motor. Please put that tube back on before that head tube snaps and you go face down!
I think he probably knows more about the loading capacity than you considering that he engineers things like this and does welding. I don't know how you can see a metal bar like that snapping so easily. I would think that the wheels would give in before that bar snaps.
@@maxwells2602 I am a certified welder and have been in the metal fabrication industry for 26yrs. I am not going to get into the weeds about welding, but there is a reason why staircases, buildings, bridges and bicycles use triangles. Without the bottom tube all of the stress is put on the headset (stem where the handle bar attaches) of the bicycle. That is not the strongest weld to begin with because it doesnt have to be, because it shares the load with the bottom tube. Now its taking it all itself. I am being less critical of his idea but more concerned for his safety. The wheels are circles and distribute their load evenly from the tire contact area to the hub and again up to the stem (the weak point in this design) in short the wheels would not collapse in on themselves. Have you ever seen that happen to any wheel under normal circumstances? This is about Trigonometry (math), physics and safety, not insulting the builder
cool, the bike can be assembled using a machine, great skill, my boss
Love the safety helmet but flip flops for the feet next to the spinning toe grinders is no problem!!!
Great build Mr HO!
I am just jealous because here in the UK I cannot make such a vehicle without only using it on private land miles away from snobby neighbours calling the Police aboout noise and safety!
I gave you a thumbs up and I am a subscriber before the haters desend upon me!
Uk is just build diferent
@@vxzrt Yes my friend, that's EXACTLY what I said 👊🏻
Keren kreatif tanpa batas 👍👍👍🙏
I strive to be like you some day👍
Thank you for your comment
На карбюраторе нет воздушного фильтра, из за этого в двигатель попадает песок и прочий мусор, в следствии чего двигатель прийдёт в негодность
И с охлаждением тоже проблема
Rất đẹp và rất tuyệt vời
Pra uma criança ótima diversão 👏🏽👏🏽👏🏽
Quá đã 👍👍👍👍
Xe đạp đã vậy kkk 😂😂
Podes mostrar como modificaste la canaste del embrague para poner la cadena de bici
Want more foot room, take off the fan, motor will still work
and you get to keep your toes.
Nice build!.
فعلآ
The gear ratios all wrong. Your clutch is going to be on fire. It's like you're taking off in 5th gear. And you better watch riding that off-road cuz that neck is about to snap right off. You need that stable triangle, for under the Triple Tree section.
Hey I've got a question
Will a 8 tooth sprocket in the front and a 40 tooth sprocket in the rear be good for 1.2 hp? Or will i have to modify the gearing more?
That's exactly what I was thinking the frame head stock will be under big stress it'll snap off unless you brace it up
em hâm mộ bác từ đây
Nice job
I have done one myself and I found that the centrifugal clutch slipped because is metal on metal. If u take the clutch apart and bond some brake pads on the clutch It works much better.
was it powerful enough to power a bike?
Mantap 👍 cocok buat berangkat sekolah🤣 🇮🇩
Chế trực thăng mi ni một người bay đi bạn.
That “pointless” bit of frame you removed is important in that it gives the frame about 80% of its strength.
bicycle frames are designed with a good safety margin
The tube section used in this bicycle can handle probably 500 kg of vertical load on the center of the frame without failing
Yup. And with a motor on the frame you’ll be putting on additional weight = extra stress load on the frame. Well, I guess he knows his job and must be well aware of things.
@@xl000 es broma?
@@hyperboytkl1077if it breaks in half it breaks in half I doubt he would care too much😂
Ça me fait penser à notre bon vieux Solex français 😉 en tout cas c'est très bien fait, félicitations 👌👏👏👏👏
Really cool simple build. Sounds like a governor somewhere needs to be removed
My 1st Go-kart was a Soap Box Derby Kart made out of boards. I used nails to fasten a 2hp cast iron Briggs & Stratton to it. My maiden run on a dirt road at probably 20mph rounding a corner hitting bumps the engine broke the wood plank and came off. It was tumbling along being pulled by the throttle cable. I was so elated that it worked l went back to work on it for another day nailing a plate of steel on a new plank to get it running again. 1964 l was 12yrs old. ben/ michigan
damn bruh, i love people like you. you made my day. great work, i hope youll be succesful with your youtube chanel rly!
Прям мою идею воплотил в реальность. Красавчик!!
Главное чтоб ногу не замотало до яиц)))) Молодец.
Hahaha your very talented 🤣
Кулибин Красавчик ты парень Привет из Кузбасса!
i really like this ❤🇮🇳
change the gearing put a smaller frount gear on the clutch otherwise you are going to burn it out good build nice
Ad ơi cây sắt cong ad dùng để vẽ đấy đc bẻ ở góc bao nhiêu độ vậy
Мото техника что бы отпугивать людей)а в целом инженер проэктировшик показал,что и такое чудо техники можно воплотить в жизнь.
Anh độ, xe đạp động cơ này - thêm, hợp số
đi anh - thánh chế - mr hồ
That flywheel is going to remove your toes. 😨😱😣🦶
Apart from that, it looks like a fun ride. 👍
B
B
U. Bb
Bạn hãy chế 1 con 50cc có thể gấp gọn để bỏ vào cốp xe đi ah.
That downtube was there for a reason. I hope you don't hit a bump. Frame will snap in half easily now. Otherwise, cool build.
Thank you for your comment
Well, it didn’t break as dreaded though, as demonstrated off road with some motocross - like riding maneuvers plus, the addition of an engine representing extra laden weight and stress on the entire bike assembly, with even part of the frame missing near the end of the video. So far so good to me. Not to mention, Papylus Bikes might even commend him for giving their product a brief promotional demonstration on strength and durability.
What a welder is for
Khu sườn nên dc gia cố lại . 1 ống ko đủ chịu lực dễ gãy, , dễ ăn hành bất cứ lúc nào
Động cơ quá yếu nên độ lại chút là ổn
a chia lại cho e con xe đó nhe...e rất thich
Ficou muito bom
Hàn thêm 1 cây sắt cho xe cứng cáp hơn
You would think that a chainsaw motor would work really well since it already has a centrifical clutch but they actually don't work well at all they tend to be extremely underpowered I used a much larger chainsaw and it was the same thing very low power
Well it should power a chainsaw most probably 10 or 15 cc
@@KaushikBala333 25
A Ms660 stihl saw motor will get you half killed.
Hay quá anh ơi gắn po xipo xem có hay hơn ko anh
Sao nén nổi mà hay
thật tuyệ vời hãy giữ kết nối với tôi
Máy bao nhiêu cc và model hiệu nào vậy anh ơi ?
Tune the carb a bit make lower gearing and add a fan cover so it doesn't overheat
Не стоит это таких усилий, если так заморачиваться взял бы мотор по больше которые левее от пилы лежал, а так ни мощности ни скорости
Там мотор уже по мощнее, с коробкой даже. Но не думаю что рама бы выдержала его
@@zxctemadurak такую как изготовил он конечно нет, а так согласитесь что данное изобретение бесполезно
đỉnh quá a oi
Ong chạy đó c a nhé bắt ong 🤣🤣🤣
Hay quá a ơi
Hay lắm bạn
wow.. good ideas bro..simple and practical.. like it..❤️❤️❤️❤️❤️
Good idea my friend thank you for sharing the video
Em chế thêm cái bô im nửa thì hay hơn
nice one dude... good invention...i like it more content like that..awesome!!!
Молодец 👍 master 👌.
Amazing and great knowledge.. I salute u brother 😊
Cutting the down tube is great knowledge? That part of the frame is there for a reason and even if you cut it you need to reinforce the frame otherwise it will snap in half if you go over a bump