What I like about this BB is its accuracy compared to the actual gun ua-cam.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . It's very heavy in weight, same as the real thing and no it didn't come with the lazer. Couple of scratches but not sure if it's bc i open it roughly or the paint cheap either way not really a bother at this point but highly recommend this.
I don't know if you just got unlucky with the gun you decided to use here or if I got super lucky with the one I got. Mine clocks in above 410, max was like 462, but never under 400 (not counting after the co2 dies). Also, mine has INSANE recoil, just about 80% of the recoil a real 9mm feels like. The sound was much louder than this too and I was shooting outside. Didn't have time to fully test out how many mags the umarex co2 carts could constantly sustain, but will update when I get the chance. If it means draining a cartridge faster for a more realistic effect, then I would still be happy lol.
Cantalever system for co2 loading is really good. But why does a full metal fullsize pistol like this only have a plastic magazine? I have a cheap plastic $30 Umarex bb pistol and it even has a full metal magazine.
@@bleach6465 yeah, once you get the firm clamp, without letting it loose again, it's actually better than the screw in type. First time I loaded it, I emptied the entire bottle of CO2 lol. After that, I did it right, and it's awesome.
@@chadthunder8362 I like the Copperheads better than the daisy one or the other more expensive ones that are black. Much easier to see where you're shooting using a pistol I really don't use the sights so it really helps me correct
Bennington Mark Brandon Wesley Smith Taylor Copperhead bb’s tend to shoot about 50 to 70 fps slower then steel bb’s. Replica Airgun’s got about 370 to 400 fps. Hope this helps.
This gun is legit! Incredible artwork and design, and that patented co2 mechanism from Sig Sauer is freakin dope! I’m pretty sure the reason why the projectile wasn’t traveling at 410fps is because the guy in the video used metal pellets instead of plastic pellets. From what I understand, the gun was designed for airsoft and you aren’t supposed to use metal pellets for airsoft, that kinda defeats the whole purpose of calling it “airsoft”. The weapon was designed to use a lighter-weight projectile that is intended to bounce off the target, being that it’s purpose was for use during airsoft battles. If you wanted a weapon that was designed to use solid-metal projectiles, intended to penetrate a target, I recommend something along the lines of a Red Ryder Air Rifle (not to be confused with an airsoft rifle). There are also more high-powered air rifles on the market that use co2 to increase the projectile’s speed. I wish Sig Sauer offered an alternative model that didn’t have the under-barrel railing, kinda like the real-deal version of the handgun that they also sell. I like the bronze finish, it’s neat and definitely adds to the glamorous design of the weapon, but I also wish that the company offered a blacked-out version, still keeping the custom designed grips as they are now just with a matte black slide and frame. The engraved spartan helmet and lettering should be polished 24k gold.
Michael Murray oh that kinda sucks, I completely misunderstood. Well then yeah the speed was a little off, I guess it was just because it was a brand new weapon that hadn’t been fired ever before. Or possibly because it uses co2 which can be finicky at times. Still a cool gun though.
So how is the Spartan de-cocked while it still has CO2 in it? Only thing I don't like is how I can't seem to de-cock the hammer without exhausting the CO2 since the firing system resets every time the trigger is pulled.
One Decocks it like a real .45ACP 1911 Pistol. You hold the grip safety down. Hold your thumb or whatever finger you want to use on the Hammer. Pull the trigger to let the hammer down while still holding the hammer with the thumb*. Now while the trigger is pulled down you CAREFULLY let the hammer down. If any of the safeties are still engaged the hammer WONT drop, no matter what you do. So of course the Thumb safety needs to be off as well for this to work.
My friend has this one and the one thing I really don’t like about it is the magazine, the magazine on the WTP sig 1911 BB gun is a lot better in my opinion.
Most Menacing 1911, Badass look to it, Best look in color, Has weak blowback, Stick magazine, Slide release spacing isn't that far back compared to a real 1911 and other Airsoft pistols... Can't beat the price though😂😂😂
A little late but the KWC line of 1911s has models that look pretty similar but have stronger blowback, full slide lock, and full size dropout magazines with the co2 inside. I have the swiss arms model in stainless: i.redd.it/4yo4yqvh3za11.jpg $100 as well.
What I like about this BB is its accuracy compared to the actual gun ua-cam.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . It's very heavy in weight, same as the real thing and no it didn't come with the lazer. Couple of scratches but not sure if it's bc i open it roughly or the paint cheap either way not really a bother at this point but highly recommend this.
BB guns were not near this cool when i was growing up lol
You just weren't buying from sig sauer! They kill it with pellet/BB guns.
Fax
co2 airguns as you shoot them cO2 cools and shoots slower due to decreased power. better results firing slower
Excellent Review! Cuts to the chase and provides the information Air Gunners require!
I'm glad he fixed his grip at the end of the video. cool BB gun might get one for IDPA training
Just bought one today and oh my god is it fun. Heavy like a real one and shoots great
Was your hammer loose
@@rodneyharper3960 no not really, I don’t shoot it anymore since the front sight fell off and I got an umarex glock
@@Jay_Mac1775 my front sight of the big sauer 1911 airsoft gun fell off, you know where they sell any of those front sight?
I found this gun used for 60 in good condition so I was very lucky
Wow, must feel like Heaven on Earth.
I don't know if you just got unlucky with the gun you decided to use here or if I got super lucky with the one I got. Mine clocks in above 410, max was like 462, but never under 400 (not counting after the co2 dies). Also, mine has INSANE recoil, just about 80% of the recoil a real 9mm feels like. The sound was much louder than this too and I was shooting outside. Didn't have time to fully test out how many mags the umarex co2 carts could constantly sustain, but will update when I get the chance. If it means draining a cartridge faster for a more realistic effect, then I would still be happy lol.
You sure this is that gun? Im really thinking of picking this one
Cantalever system for co2 loading is really good. But why does a full metal fullsize pistol like this only have a plastic magazine? I have a cheap plastic $30 Umarex bb pistol and it even has a full metal magazine.
Should have tested with copper vs steel and shown the difference. Thanks for showing the actual fps. The rating on the box is almost never right
I swear I did the exact same thing you were doing to load in the co2 but for some reason my co2s like to explode
You have to do it fast because of co2 leaks
@@bleach6465 yeah, once you get the firm clamp, without letting it loose again, it's actually better than the screw in type. First time I loaded it, I emptied the entire bottle of CO2 lol. After that, I did it right, and it's awesome.
you're supposed to use steel bb's
Get a 6mm airsoft pistol if you want something safer or to play around. (always wear eye protection)
if you use steel bbs whats the difference
Those are steel bb's genius, they're just coated with copper. Some are zinc coated some are adonized steel.
@@chadthunder8362 I like the Copperheads better than the daisy one or the other more expensive ones that are black. Much easier to see where you're shooting using a pistol I really don't use the sights so it really helps me correct
I just bought awesomely. Enjoy your video
Check out the Winchester/Daisy Model 11 1911 . Nice gun.
would you recommend a decent flash light for that BB gun ?
Nice review And High quality/Superb gun.
about how many rounds or mags do you get out of it before you start to run low on c02
IllGlory about100 or so
With mine i can get like 3-4 mags out of one cylinder but on the last six for mag 4 it slows down
I get 3-4 mags per co2 on average
Looks so fucking cool. It's a shame about the tragically low velocity
Bennington Mark Brandon Wesley Smith Taylor Copperhead bb’s tend to shoot about 50 to 70 fps slower then steel bb’s. Replica Airgun’s got about 370 to 400 fps. Hope this helps.
Now i can afford to collect sig 1911 pistols
This gun is legit! Incredible artwork and design, and that patented co2 mechanism from Sig Sauer is freakin dope! I’m pretty sure the reason why the projectile wasn’t traveling at 410fps is because the guy in the video used metal pellets instead of plastic pellets. From what I understand, the gun was designed for airsoft and you aren’t supposed to use metal pellets for airsoft, that kinda defeats the whole purpose of calling it “airsoft”. The weapon was designed to use a lighter-weight projectile that is intended to bounce off the target, being that it’s purpose was for use during airsoft battles. If you wanted a weapon that was designed to use solid-metal projectiles, intended to penetrate a target, I recommend something along the lines of a Red Ryder Air Rifle (not to be confused with an airsoft rifle). There are also more high-powered air rifles on the market that use co2 to increase the projectile’s speed. I wish Sig Sauer offered an alternative model that didn’t have the under-barrel railing, kinda like the real-deal version of the handgun that they also sell. I like the bronze finish, it’s neat and definitely adds to the glamorous design of the weapon, but I also wish that the company offered a blacked-out version, still keeping the custom designed grips as they are now just with a matte black slide and frame. The engraved spartan helmet and lettering should be polished 24k gold.
Mitchell Larson no I have this gun, it uses steel bbs only.
Michael Murray oh that kinda sucks, I completely misunderstood. Well then yeah the speed was a little off, I guess it was just because it was a brand new weapon that hadn’t been fired ever before. Or possibly because it uses co2 which can be finicky at times. Still a cool gun though.
It uses 4.5mm steel bbs
😂😂 it’s a air gun
Airsoft are 6mm steel Bob's are 4.5mm. Airsoft weapons have the orange tip. A bb gun cannot fire airsoft ammo.
So how is the Spartan de-cocked while it still has CO2 in it? Only thing I don't like is how I can't seem to de-cock the hammer without exhausting the CO2 since the firing system resets every time the trigger is pulled.
One Decocks it like a real .45ACP 1911 Pistol. You hold the grip safety down. Hold your thumb or whatever finger you want to use on the Hammer. Pull the trigger to let the hammer down while still holding the hammer with the thumb*. Now while the trigger is pulled down you CAREFULLY let the hammer down. If any of the safeties are still engaged the hammer WONT drop, no matter what you do. So of course the Thumb safety needs to be off as well for this to work.
My friend has this one and the one thing I really don’t like about it is the magazine, the magazine on the WTP sig 1911 BB gun is a lot better in my opinion.
How are they different? im just wondering which one i should by, im stuck between the spartan and the wtp one lol
*buy
Alguém sabe me dizer como posso desmontar essa pistola?? Obrigado
I have this gun I love it
Mark Mccormic. You know how to disarm it, I want to clean it up !!
how is it now. Do u still like it. Im thinking of getting it
My hammer is very loose is there a way to make it tighter
My front site came flying off today!
I bought one and my slide doesn’t work
Hello, I have one of these but it is dirty and I would like to know how to disassemble it to clean it, I would really appreciate it.
There should be videos out in UA-cam Land that show how to release the slide from the frame.
Oooooo Fancy,I got Springfield Armoury instead
The gun is good but he ready to buy a lot of co2’s you can shoot 60 or 70 bbs until it rounds out
Can you play this gun in most airsoft fields using plastic .177 bbs?
No. Its not the same caliber and fps
Yes
NO
Leaks like hell
Anyone know what App he was using to read the decible
Just got this gun it's sweet not very strong but nice
Suppose to use steel bbs not copper
Please show how the shutter frame removed on this gun?
Why you don't answered my question? Answer please. Show us video.
Excellent Report. Thanks. Out.
Can you also use pellets?
Gavin Gannod not in this one but in he sig p226 you can
No
Most Menacing 1911,
Badass look to it,
Best look in color,
Has weak blowback,
Stick magazine,
Slide release spacing isn't that far back compared to a real 1911 and other Airsoft pistols...
Can't beat the price though😂😂😂
A little late but the KWC line of 1911s has models that look pretty similar but have stronger blowback, full slide lock, and full size dropout magazines with the co2 inside. I have the swiss arms model in stainless: i.redd.it/4yo4yqvh3za11.jpg $100 as well.
Dam that's nice 👌
No safety??
Why it is so poorly shot? The speed is not constant
Stenly Gus the co2 releases gas cooling it down after every shot therefore it slows down the bb
Because the gas is different each time and he’s using the wrong bbs
I am from sparta greece
Wish they made a good airsoft version
bashar haddad that is an air soft version...
@@vintagekileaux4869 airsoft shoots 6 mm or higher sized bbs idk really but theres differences
Who else thinks this is quagmire talking lol
Not really
No
αρκετα απο αυτα εχουν βγει ελλατωματικα
I can’t get the hammer to go down on mine.
Rebecca Rigdon there is a lock on the slide try that and if that doesn’t work take the mag out and try and fire it
FPS in nowhere near what they claim.
It will shoot the claimed fps with plastic bb s
1 jarşörle 1 tüp bitti