F&R, Bike as usual looks and sounds amazing. The T-Bar set up on Sandstorm looks absolutely BadAss bro. Thank you for sharing this awesome content with us all 🤙
Those bars look really nice really nice clean job at get lowered. I just put thrash and 9 inch pullback on mine with fly Moto on my road king really enjoyed them, especially going through the back. Roads didn’t like them at first but now I really like them yours look fantastic
@@FLYANDRIDE15Do you think how they react is the design of the bars(t bars) or more to do with the fact that you went from rubber bushings to solid bushings. I’m just wondering. I know everyone raves about them but that may be partly because of the solid bushings and partly because it’s the latest fad. Either way it’s not really my style but looks cool. 👊🏻🤘🏻
@@FLYANDRIDE15 Thanks for replying. I may have to try em out eventually. Yours is definitely one of the best set ups I’ve seen on a street glide! Awesome bike.
Love the set up dude…. Really thinking about doing a similar setup like this for my 14’ street glide. Only question is, how did they go about the ignition switch? Only aspect of the job I’m unsure about.
@@nickjohnson7456 thanks. He removed the ignition switch so you have to be comfortable without the lock. It’s a CVO so for me that’s the only function I lost.
So I was also thinking about doing this on my 21 street glide but not being able to see my screen was stopping me. What did you do differently bro? I need to know so I can try doing that. WOW I absolutely love this
8 inch riser with one inch pull back and T. rex plate. By Krauss. Handlebars are thrashin because I wanted more aggressive bend and position. If you call @getlowered he has all details as well.
I knew it … T-bar set up looks badass bro on the bike. Are the Thrashin bars bigger in diameter to be able use the heated grips or did you have to modify them?
The reach is just right for me. 5’10 and 33/34 Length on arms. I like the kraauss look preferably over the thrashin but just preference, both great. My handlebar are thrashin
I’m seriously contemplating this set up. I’m just not sure if it’s a far enough reach for me. I don’t want to be pulled back too far. I’m 5’ 11”. What’s your height? Any opinions to offer me?
Love the set up , But can you see behind you with the mirror set ,they seem a little tucked in compared to 12 "ape , I'm think a bigger rider would be looking at his shoulders , Whats ur thought , Love the look
I noticed that you had your Street Glide in a stand/ chock on the driveway. Was it attached to your pavers or just unsecured? I'm considering buying one for my garage? What brand? Thanks for your informative content.
You need to reach out to Get lowered. Price varies as you can imagine. Just look him up and tell him fly and ride sent ya. These range from $1500 to $6000. Depending on setup.
@@destinationh-d1 I switched to the thrashin, more aggressive. The one he had in originally is what he is referring to. I’ll be at bikes and breakfast the following Sunday if you want to meet there.
@@crabbie0253 sorry. Was trying to include link. Just look up Thrashin aggressive bar. By the way. Check out the video I am about to upload in a hour for a quick update before you order 🤙
Here you go. www.revzilla.com/motorcycle/techmount-techgripper-handlebar-mount-kit www.revzilla.com/motorcycle/techmount-techgripper-handlebar-mount-kit?gad_source=1&gclid=EAIaIQobChMIlNz71uDEhQMVI09HAR1-9wwxEAQYAiABEgLdCfD_BwE&sku_id=1202926
@@riffraffchoppers nope. There’s these pieces that act as a cushion (can’t recall what they are called now). This setup removes that and connects direct
@@FLYANDRIDE15 hahaha you don’t know what your talking about. They are connected the same way directly to the top tree as your set up. You’re referring to the riser busing which your set up gets rid of. Makes absolutely no difference in handling or feel. If anything getting rid of those causes more vibration in the bars. I always run solid ones when running taller risers but they add vibration
love the setting, ill consider to do it on my SG
@@edwinparedesnjusa thx
Won’t put anything on my bikes but T-bars. Had several bikes with fish hooks and the sort. This last Road Glide has T-bars. Couldn’t be happier.
💯🤙
F&R, Bike as usual looks and sounds amazing. The T-Bar set up on Sandstorm looks absolutely BadAss bro. Thank you for sharing this awesome content with us all 🤙
Thx bro
The Thrashin bars are 🔥!
That setup is super clean!
Thank you!
Look great… I think I’ve made up my mind what’s my next upgrade… thank u.. 🤙
Thx bro!
I just subscribed and really happy to see your kind information
Thank you and welcome
Those bars look really nice really nice clean job at get lowered. I just put thrash and 9 inch pullback on mine with fly Moto on my road king really enjoyed them, especially going through the back. Roads didn’t like them at first but now I really like them yours look fantastic
Awesome! Thx bro
Looks fantastic bro
Thanks bro!!
Those bars look pretty sweet and cool to hear how they react. Right Safe brother.
Thx bro
@@FLYANDRIDE15Do you think how they react is the design of the bars(t bars) or more to do with the fact that you went from rubber bushings to solid bushings. I’m just wondering. I know everyone raves about them but that may be partly because of the solid bushings and partly because it’s the latest fad.
Either way it’s not really my style but looks cool. 👊🏻🤘🏻
@@Hellbentbiker I think you are spot on. That move away from rubber bushing is a big factor but the feel also to a lesser extent
@@FLYANDRIDE15 Thanks for replying. I may have to try em out eventually. Yours is definitely one of the best set ups I’ve seen on a street glide! Awesome bike.
@@Hellbentbiker my pleasure. Thx for watching and sharing your thoughts , appreciate it. 🤙
Bars look good, and the bike sounds great!
Thanks!
Love the bars and setup for sure,,,,,,,,
Thanks bro. Didn’t you guess that’s what it was? Can’t recall.
Love the set up dude…. Really thinking about doing a similar setup like this for my 14’ street glide. Only question is, how did they go about the ignition switch? Only aspect of the job I’m unsure about.
@@nickjohnson7456 thanks. He removed the ignition switch so you have to be comfortable without the lock. It’s a CVO so for me that’s the only function I lost.
Get Lowered FTW! I’ve never been a fan of T-bars on a StreetGlide but that looks great!!!
that's exactly what I thought! Looks awesome and just by watching you see the differences in handling! Love it !
Thanks bro!
Thanks brotha!
Looks really sharp F&R!
Thx Shasi!
So I was also thinking about doing this on my 21 street glide but not being able to see my screen was stopping me. What did you do differently bro? I need to know so I can try doing that. WOW I absolutely love this
8 inch riser with one inch pull back and T. rex plate. By Krauss. Handlebars are thrashin because I wanted more aggressive bend and position. If you call @getlowered he has all details as well.
@@FLYANDRIDE15 ok thank you. I might just tell Mike I need the Flyandride15 hook up. I have yet seen a street glide that you can see the screen.
@@ryanr4181 There you go! He will take care of you!
I knew it … T-bar set up looks badass bro on the bike. Are the Thrashin bars bigger in diameter to be able use the heated grips or did you have to modify them?
You called it! Thrashin bars fit heated grips however, shims are required to fit Kraus setup. 🤙
I just ordered everything from Dylan over there. I'm in NC so I'll have to install it. Thanks for the video!
@@ronaldhartman7547 nice!! 👍
Hey do I need the wire extensions?
@@ronaldhartman7547 no sir.
Do I need anything for the switch? Getting ready to install. Thanks for your help!
@@ronaldhartman7547 no sir. I didn’t. Good luck!
Looks awesome I have the same setup and absolutly love it!! Get lowered did a really nice job!! What brand wheel chock is that?!!
Condor. Thanks!
Thanks! Condor
Those look tough 😤 🔥 🔥
💯👊
🔥 love this setup. I'm torn between kraus and thrashin set up. Straight or kickback risers. Man oh man.
How are the reach with the kickback?
The reach is just right for me. 5’10 and 33/34 Length on arms. I like the kraauss look preferably over the thrashin but just preference, both great. My handlebar are thrashin
Id like to do the same, but im reluctant to cut into the plastic trim to accommodate the risers.
Minor cuts and you can always order if you change your mind.
I’m seriously contemplating this set up. I’m just not sure if it’s a far enough reach for me. I don’t want to be pulled back too far. I’m 5’ 11”. What’s your height? Any opinions to offer me?
@@joshlong212 I’m 5’10 and it’s perfect for me. You may be fine at 5 11”
Love the set up , But can you see behind you with the mirror set ,they seem a little tucked in compared to 12 "ape , I'm think a bigger rider would be looking at his shoulders , Whats ur thought , Love the look
@@Bamm90210 I think it still works. John is 6 1 and has similar setup and works.
@@FLYANDRIDE15 Great thanks for the info
Looks good ⚡️
Thx bro
Damn! Looking good my dude!
Thx bro
I noticed that you had your Street Glide in a stand/ chock on the driveway. Was it attached
to your pavers or just unsecured? I'm considering buying one for my garage? What brand? Thanks for your informative content.
Thanks! It’s Condor. 🤙
hey dude, can you link the full set up you got?, im looking at doing this to my 2018 cvo! hate the bars i have now!
@@RougeWhiteBoy call @getlowered he did it for me.
Just about to go for the rizzoma mirrors after seeing them on your bike, what made you change them?
Different look with my new handlebar setup. But really liked the rizoma, had them for three years
I have a similar build it’s on my profile pic. Not a cvo but yea. Nice bike man
Thank you!
And now I want a set of T bars.
😂
Do you feel the wind resistance more in these bars?
@@jerrysqwirts9108 not at all. They are right below the wind with the fairing
I have them only thing is you will feel every bump in the road
@@russellabernathy3241 I don’t mind it. 🤙
Can I ask how much that install w/ parts was? I'm considering something similar for my street glide.
You need to reach out to Get lowered. Price varies as you can imagine. Just look him up and tell him fly and ride sent ya. These range from $1500 to $6000. Depending on setup.
@@FLYANDRIDE15 Mike said you have a Bitwell bar, not Thrashin. Which one? Can I come over and see it in person? I'm in NJ.
@@destinationh-d1 I switched to the thrashin, more aggressive. The one he had in originally is what he is referring to. I’ll be at bikes and breakfast the following Sunday if you want to meet there.
@@FLYANDRIDE15 I've been trying to get to one of those for a while, haha. It's hard for me.
Could you drop a link to the bar you're using? I'm trying to run a similar setup
Here you go. www.thrashinsupply.com/cart
@@FLYANDRIDE15 there’s nothing in the cart
@@crabbie0253 sorry. Was trying to include link. Just look up Thrashin aggressive bar. By the way. Check out the video I am about to upload in a hour for a quick update before you order 🤙
Just curious, what’s the phone mount? Do you like it?
Here you go. www.revzilla.com/motorcycle/techmount-techgripper-handlebar-mount-kit www.revzilla.com/motorcycle/techmount-techgripper-handlebar-mount-kit?gad_source=1&gclid=EAIaIQobChMIlNz71uDEhQMVI09HAR1-9wwxEAQYAiABEgLdCfD_BwE&sku_id=1202926
www.revzilla.com/motorcycle/techmount-techgripper-handlebar-mount-kit www.revzilla.com/motorcycle/techmount-techgripper-handlebar-mount-kit?gad_source=1&gclid=EAIaIQobChMIlNz71uDEhQMVI09HAR1-9wwxEAQYAiABEgLdCfD_BwE&sku_id=1202926
what part number is that set up you got there?
Give get lowered a call in PA, he’s got all the parts 🤙
What happen to your lock/unlock buttom on the ignition panel?
It was removed with the tbar setup.
@FLYANDRIDE15 I've been looking at how to work with that and figured that's what they did. Hopefully, I will have mine installed this weekend.
@@shawntaber2119 good luck 👍
@FLYANDRIDE15 thank you sir!
Looks good. But you can't see the infotainment system. 😢
I sure can. All of it.
Can you see your infotainment system? doesn't look like it. You must have to move your head forward and up?
I can see it perfectly. Don’t go by the camera, it’s deceiving
@@FLYANDRIDE15 ok good!
where you get that
Get what?
is that a 1 inch bar?
@@brucemunro3342 I believe so
Are regulars or apes or any other bar not directly connected hahahaha?
@@riffraffchoppers nope. There’s these pieces that act as a cushion (can’t recall what they are called now). This setup removes that and connects direct
@@FLYANDRIDE15 hahaha you don’t know what your talking about. They are connected the same way directly to the top tree as your set up. You’re referring to the riser busing which your set up gets rid of. Makes absolutely no difference in handling or feel. If anything getting rid of those causes more vibration in the bars. I always run solid ones when running taller risers but they add vibration
@@riffraffchoppers well it’s great to have such knowledgeable subscribers. Thx for the info.
@@FLYANDRIDE15 not a subscriber but you’re welcome
Ditch the mask bro .... lol
Nah bro. Doing you a favor. Trust me. You don’t want to see ugly mug!
@@FLYANDRIDE15😂😂😂😂😂😂👊