VE SV6 exhaust. KM fit up a 2.5 inch cat back with high flow cats.
Вставка
- Опубліковано 6 жов 2024
- KM team fitting up a twin 2.5 inch cat back system made by X-Force. This in the new 409 stainless steel system and is a very nice fit and finished system.
On this car we have also replaced the catalytic converters with high flow 100 cell metal cats.
Nice growl! Now to fix that eye-catching dent on the bumper
Had this system fitted to my vz wagon sounds awesome
I replaced the mufflers with hotdogs and i recon it sounds better than that its good on the free way people get out of your way pretty quick
Can send pic your hotdogs
I wanna buy them for my sv6
What hotdogs did you buy? and did you have the xforce system with the hotdogs
I’d get away from an alloytec v6 with muffler deletes coming down the highway aswell, they’ve got to be the worst sounding engine in all of Australia. And to think the owners could have had one of the best sounding engines in Aus if they’d just spent a little bit more money on the v8.
The pop at the end of each rev is great 😂
That song is lit 🔥 though…. Not a lot of people know about it…. Banks- Underdog
Also looked at the xforce range and this one looks like the 2.25” catback exhaust not the 2.5”
Good job👍
Mate that sounded tinny like my mates scooter 🤣
Dope 🤤
Hey mate wondering if this system will bolt straight on to a stock ve sv6 ant the cats or do they need to be modified
Hi,
The Xforce system is a direct bolt on. The cat mod is custom but still works with the stock system.
Hey mate good informative vid. where are u located?
Multiple stores or just one?
Not sure if my question will be answered but where can I purchase the 2.5” cat you used ? Or would a 2.25” cat fit onto a 2.5” catback exhaust?
Hi. Probably a stupid question, would this sound with no drone be the same in a stock 2016 VF V6 Calais? Or was there more done to this car to sound like this? My car is too quiet, but I don’t want drone.
That's a nice sounding 4 cylinder commodore...
6 cyl mate
@@jacktrappett8462 yeah sounds like a 4
Can’t tell if this is satire or not
You do know they didn’t have 4 cyls till the last gen right
mate sounds nothing like a 4
Do y'all export worldwide? I really want one for my V6 Pontiac G8 but obviously I can't just drive across the Pacific and drive South
Hi,
Yes we ship worldwide. Send us an email at exhausts@kuluinmufflers.com.au
Cheers
Luke
Do you gain any tork if you do the headers?
Any good exhaust shops down here in Melbourne that could do this exact same setup ? Cheers !
Will all the rubber hangers line up upgrading from a v6 exhaust to a vf ss one?
Yes, they are all the same
@@kuluinmufflers4100 sweet as thanks dude 🙂
Will I need to get a tune if I’m getting a bigger exhaust on V6 commodore?
Can those high flow cats be added to a Walkinshaw catback on a VF SV6 wagon?
Yes, it can be done to anything with a cat back
I have a 2013 Vf SV6 Sportwagon, what would I need to do and pay to get the above result?
Hi, this setup is $1500
do we need a tune with high flow cats?
i enquired about this setup in melbourne and they said i would need a tune
Would this be good for VZ SV6 if not what would you recommend?
Any idea on the db rating? Looking at getting one for my car but worried I’m gotta get done for it being over 90db
Hi,
Unfortunately we dont do db testing
Judging by just the video, Imo they're not loud enough for the cops to pull you up for it even if you're giving it some, I have a custom exhaust on my sv6 that is rated at 134db peak and the cops haven't defected the car in 2 years of daily driving it. Most cops let you go just don't be an asshole when they pull you up.
can this system be fitted onto a VF ute?
Yes, they are basically the same
It’s this note EPA ?
Is that v6 tuned or not
does this exhaust have hot dogs or a standard mid muffler??
It's the 2.5 inch x force cat back. It has a mid resonator and rear mufflers
@@kuluinmufflers4100 are these meant for the ss cause they only show 2.25” in the sv6 category.
@@kuluinmufflers4100 did you change the cats to high flow and what size were they? And also the manifolds? These exhaust sound great and want them for my sv6.
Yes, it lists it for the V8 but sounds great on the V6. It's is running the stock manifolds with 100cell 2.5 inch high flow cats
@@kuluinmufflers4100 Any drone? Where can I find 2.5" xforce cats?
im not sure to get catback or xforce exhaust system someone help me pls
Is it legal? And aren’t you gonna get drone?
sleepyweepy the sound level would be close to the legal limit, but no drone
Kuluin Mufflers sweet thanks btw nice video
What’s a good exhaust for the Holden Cruze hatch sri 2015
Evrything is an improvement on the Cruze, they respond well to upgrades. A full 3 inch system is the way to go
@@kuluinmufflers4100 would you be able to send me a link to a exhaust system ? Thanks
@@damianjovanovski5639 I cant seem to copy it. If you jump on the Xforce page and follow the prompts it will lead you to it
Can I get this visit in Perth?
Part number for the high flow cats?
Its just a generic 100 CPI stainless steel metalic core.
Do you need to do a retune after the bigger exhaust
Any exhaust you will normally.
How does the 2.5 fit into the stock 2.25 after the cat?
They both bolt up to the same flange pattern. Any cat back system will fit. The 2 1/4 inch system is the same flange as the 2 1/2 and 3 inch
Twins xforce catback exhaust system is it legal
Yes
What year?
I I I’m not too sure now on what year model it is
I think its 2010 ve sidi
How much cost ??
Hi, this setup is $1600
sounds kinda like a gtr ngl
Would rather bigger cams and stock exhaust
Useless if you cant get the air out. You would need to do the exhaust before cams
For the price of that exhaust you could do cams and would make more power
@@brownie2917 still, the stock exhaust is extremely restrictive and cams do their best work high in the rpm range where you have to get more air out. Putting cams in on a stock exhaust would probably hurt power
Does that have oxygen sensors on the cats
@@brownie2917 it's got 4, 2 before the cats and 2 after
What would this same job be worth $ on a ve wagon
Brendan Cornwall hi mate, $1600 all fitted and done.
Does this include the cost of the exhaust? Or is the exhaust cost separate? If the exhaust is separate how much was it?
Beside The Tide yea it would be the cost of parts and labour
Just don't get a vf ss redline exhaust learned the hard way has no spot for the o2 sensors and the ve ss mufflers don't bolt up
So your saying the xforce 2.5" exhaust listed for the V8 wont work with a ve sv6?
@@BarraGutheWorld no idea with xforce i ended up getting a vf ss exhaust like in the photo but doesnt have a spot for o2 sensors to go in
Waste of money stock is better on vf sv6 .
no it isn't
Nice But U No .Can't Beat a V8
Not everyone can afford a V8, so who cares?
Peter Lee you cant exactly drive a v8 car on your p plates now can you?
no shit Sherlock but it also depends on the driver as well, some are too timid to even go 160 in a v6 let alone a v8
Peter Lee - Sv6’s are better daily’s.
A done up one will cap a v8
🤮🤮🤢